McAlpine Chrome Plumbing Fittings

The McAlpine ABS Solvent Weld Adaptor provides a simple, reliable conversion between chrome plated brass compression waste fittings and plastic ABS solvent weld waste pipe. Manufactured to BS EN 1329-1:2020, these adaptors are designed for use with McAlpine CP Brass Waste Pipe and Fittings and are available in three sizes to suit the most common waste pipe configurations. Key Features Converts brass compression to ABS solvent weld: Seamlessly joins chrome plated brass compression fittings to plastic solvent weld waste pipe Three sizes available: 32mm to 1¼", 35mm to 1¼", and 42mm to 1½" — select your size above Manufactured to BS EN 1329-1:2020: Meets current British Standard for plastic piping systems for soil and waste discharge For use with McAlpine CP Brass Waste range: Designed to work with McAlpine’s chrome plated brass waste pipe and fittings ABS construction: Durable, corrosion-resistant material suitable for waste water applications Easy DIY installation: No specialist tools required Technical Specification Brand: McAlpine SKUs: ABSCON-32X1.25 (32mm to 1¼") | ABSCON-35X1.25 (35mm to 1¼") | ABSCON-42X1.5 (42mm to 1½") Material: ABS plastic Standard: BS EN 1329-1:2020 Connection type: Brass compression inlet to ABS solvent weld outlet Available sizes: 32mm × 1¼", 35mm × 1¼", 42mm × 1½" For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Match the size to your existing waste pipe diameter. 32mm and 35mm are common for basin and bidet wastes; 42mm is typically used for bath and shower waste applications. If unsure, measure your existing pipe or check your fitting specifications. Will this work with any brass compression fitting?This adaptor is designed specifically for use with McAlpine CP Chrome Plated Brass compression waste fittings. Compatibility with other brands cannot be guaranteed — contact us if you need advice. Do I need solvent cement to complete the joint?Yes — the outlet side of this adaptor is a solvent weld connection and requires solvent cement. We recommend McAlpine SolvPro Solvent Cement (SVPR-1 / SVPR-2) for a secure, WRAS-approved joint. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine ABS Solvent Weld Adaptor: McAlpine SolvPro Solvent Cement with Dauber Applicator — WRAS Approved | UV Detectable McAlpine Supereasy Close Coupling Kit — CC-KIT / CC-KIT2 Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine 90° Chrome Plated Brass Compression x ABS Solvent Weld Bend allows a right-angle change of direction in a waste pipe run, combining a chrome plated brass compression inlet with an ABS solvent weld outlet. Ideal for under-sink and basin waste installations where a neat, chrome-finished connection is required. Available in 1¼" (32/35mm) and 1½" (42/43mm) sizes. Key Features 90° bend: Right-angle direction change for waste pipe runs Chrome plated brass compression inlet: Smart, corrosion-resistant finish for exposed pipework ABS solvent weld outlet: Secure, permanent connection to plastic waste pipe Two sizes available: 1¼" x 32/35mm and 1½" x 42/43mm — select above Dual-fit 1¼" version: Supplied with 2 rubber washers, allowing the chrome compression nut to fit both 32mm European and 35mm UK chrome brass pipe Part of the McAlpine CP Chrome Plated Brass Waste range: Designed to work with McAlpine CP brass waste fittings Easy installation: Standard compression and solvent weld connections Technical Specification Brand: McAlpine SKUs: ABS32/35A-CB (1¼" x 32/35mm) | ABS42/43A-CB (1½" x 42/43mm) Bend angle: 90° Inlet connection: Chrome plated brass compression Outlet connection: ABS solvent weld Available sizes: 1¼" x 32/35mm | 1½" x 42/43mm 1¼" version includes: 2 rubber washers (fits 32mm European and 35mm UK pipe) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?1¼" (32/35mm) is standard for basin and bidet waste outlets. 1½" (42/43mm) is used for bath and shower waste. Match the size to your existing waste pipe or trap outlet. What is the difference between 32mm and 35mm?32mm is the European standard for chrome waste pipe; 35mm is the traditional UK size. The 1¼" version of this fitting is supplied with two rubber washers so the compression nut fits both — no need to buy separate fittings for each pipe size. Do I need solvent cement for the ABS outlet?Yes — the ABS outlet is a solvent weld connection. We recommend McAlpine SolvPro Solvent Cement (SVPR-1 / SVPR-2) for a secure, WRAS-approved joint. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside this fitting: McAlpine SolvPro Solvent Cement — WRAS Approved | UV Detectable | SVPR-1 / SVPR-2 McAlpine ABS Solvent Weld Adaptor — Converts Brass Compression to Plastic Waste Pipe Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine Straight Chrome Plated Brass Compression x ABS Solvent Weld Connector provides a straight in-line join between chrome plated brass compression waste fittings and ABS plastic solvent weld pipework. Perfect for situations where a run of chrome brass waste pipe needs to transition back to plastic, keeping the installation neat and code-compliant. Designed for use with ABS solvent weld pipes and fittings conforming to BS EN 1329-1. Available in 1¼" (32/35mm) and 1½" (42/43mm). Key Features Straight connector: In-line join with no change of direction Chrome plated brass compression inlet: Smart finish for exposed pipework, compatible with McAlpine CP brass waste range ABS solvent weld outlet: Permanent, secure connection to plastic waste pipe Two sizes available: 1¼" x 32/35mm and 1½" x 42/43mm — select above Dual-fit 1¼" version: Fits both 32mm European and 35mm UK chrome brass pipe Compliant with BS EN 1329-1: For use with ABS waste pipes and fittings meeting this standard Part of the McAlpine CP Chrome Plated Brass Waste range Technical Specification Brand: McAlpine SKUs: ABS32/35G-CB (1¼" x 32/35mm) | ABS42/43G-CB (1½" x 42/43mm) Fitting type: Straight connector Inlet connection: Chrome plated brass compression Outlet connection: ABS solvent weld Available sizes: 1¼" x 32/35mm | 1½" x 42/43mm Standard: BS EN 1329-1 For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?1¼" (32/35mm) is standard for basin and bidet waste outlets. 1½" (42/43mm) is used for bath and shower waste. Match the size to your existing waste pipe or trap outlet. What is the difference between 32mm and 35mm?32mm is the European standard pipe size; 35mm is the traditional UK size. The 1¼" version of this connector fits both — no separate fittings needed. Do I need solvent cement for the ABS outlet?Yes — the ABS outlet requires solvent cement. We recommend McAlpine SolvPro Solvent Cement (SVPR-1 / SVPR-2) for a secure, WRAS-approved joint. How does this differ from the 90° bend version?This is a straight connector — no change of direction. If you need a right-angle turn in your waste run, see the McAlpine 90° Bend Chrome Brass x ABS Connector instead. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside this connector: McAlpine 90° Bend — Chrome Plated Brass x ABS Solvent Weld McAlpine SolvPro Solvent Cement — WRAS Approved | UV Detectable McAlpine ABS Solvent Weld Adaptor — Converts Brass Compression to Plastic Waste Pipe Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine Synthetic Rubber Seal Reducer is a simple but essential component for adapting chrome plated brass compression waste fittings to smaller pipe sizes. Used when connecting pipe of a different diameter into a compression fitting, these reducers ensure a watertight seal without the need for replacement fittings. Designed for use with the McAlpine CP Chrome Plated Brass Waste Pipe and Fittings range, available in three sizes to cover the most common waste pipe combinations. Key Features Reduces compression fitting to smaller pipe size: Allows a fitting designed for a larger pipe to accept a smaller diameter pipe with a watertight seal Synthetic rubber construction: Flexible, durable and resistant to waste water Three sizes available: 1¼" x 32mm Euro, 1½" x 32mm Euro, and 1½" x 1¼" — select above For use with McAlpine CP Brass Waste range: Designed to work with McAlpine chrome plated brass compression waste fittings Quick and easy to fit: Simply insert into the compression fitting before tightening Technical Specification Brand: McAlpine SKUs: R/SEAL-35X32 (1¼" x 32mm Euro) | R/SEAL-42X32 (1½" x 32mm Euro) | R/SEAL-42X35 (1½" x 1¼") Material: Synthetic rubber Type: Seal reducer / reducing washer Available sizes: 1¼" x 32mm Euro | 1½" x 32mm Euro | 1½" x 1¼" For use with: McAlpine CP Chrome Plated Brass Compression Waste Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Select based on your fitting size and the pipe you are connecting into it. For example, if you have a 1½" compression fitting but need to connect a 32mm European pipe, choose the 1½" x 32mm Euro option. If connecting a 1¼" pipe into a 1½" fitting, choose 1½" x 1¼". What is the difference between 32mm Euro and 1¼"?32mm Euro refers to the metric European standard pipe diameter; 1¼" (approximately 35mm) is the traditional UK imperial size. These are close but not interchangeable — make sure you select the correct reducer for your pipe. Will this work with other brands of brass compression fittings?These reducers are designed for the McAlpine CP range. Compatibility with other brands cannot be guaranteed — contact us if you need advice. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside McAlpine Rubber Seal Reducers: McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine 90° Bend — Chrome Brass x ABS Solvent Weld McAlpine ABS Solvent Weld Adaptor — Converts Brass Compression to Plastic Waste Pipe Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine 40K-CB Blanking Cap is designed specifically to seal the unused branch outlet on the McAlpine 42E-CB Chrome Plated Brass Compression Tee. When only two of the three outlets on a tee are required, this cap provides a clean, secure blank-off — keeping the installation watertight and neatly finished. Part of the McAlpine CP Chrome Plated Brass Waste Pipe and Fittings range. Key Features Designed for the McAlpine 42E-CB compression tee: Precision-fit blank-off cap for the unused branch outlet Seals unused outlet: Keeps your waste installation watertight where a tee branch is not required Chrome plated brass: Matches the finish of the 42E-CB tee for a consistent appearance Part of the McAlpine CP Brass Waste range: Designed to integrate with McAlpine chrome plated brass waste fittings Simple installation: Compression fit — no tools required Technical Specification Brand: McAlpine SKU: 40K-CB Type: Blanking cap / blank-off plug Material: Chrome plated brass For use with: McAlpine 42E-CB Chrome Plated Brass Compression Tee Connection type: Compression Country of Origin: United Kingdom Frequently Asked Questions Which fitting does this cap work with?The 40K-CB is designed specifically for the McAlpine 42E-CB Chrome Plated Brass Compression Tee. It is not a universal cap — please confirm you have the 42E-CB tee before ordering. When would I need a blanking cap?A blanking cap is used when you have a compression tee installed but only need two of the three outlets — for example, when a branch connection is no longer required or was fitted speculatively for future use. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 40K-CB Blanking Cap: McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine 90° Bend — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine 42E-CB Chrome Plated Brass Compression Tee is a premium quality three-way waste fitting with sleek chrome plated compression nuts that complement McAlpine’s CP Brass trap range. With 1½" compression outlets as standard, the tee can be reduced to accept 1¼" or 32mm European pipe using separately available synthetic rubber seal reducers — making it one of the most versatile fittings in the CP Brass range. Ideal for under-sink and vanity unit waste installations where a neat, chrome finish is required. Key Features 1½" compression outlets: Standard size for bath and shower waste applications Reducible to 1¼" and 32mm Euro: Using seal reducers R/SEAL-42X35 and R/SEAL-42X32 (sold separately) Chrome plated brass compression nuts: Sleek finish that matches McAlpine CP Brass trap nuts for a consistent look throughout Three-way tee configuration: Allows two waste pipes to combine into one outlet Blanking cap available: Use 40K-CB (sold separately) to blank off an unused branch outlet Part of the McAlpine CP Chrome Plated Brass Waste range Technical Specification Brand: McAlpine SKU: 42E-CB Type: Compression tee Material: Chrome plated brass Outlet size: 1½" compression (standard) Reducible to: 1¼" (using R/SEAL-42X35) | 32mm Euro (using R/SEAL-42X32) Connection type: Compression For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Can I use this tee with smaller pipe sizes?Yes — the 42E-CB accepts 1½" pipe as standard. Using McAlpine rubber seal reducers (R/SEAL-42X35 for 1¼", R/SEAL-42X32 for 32mm Euro), you can connect smaller diameter pipe into any of the three outlets without replacing the fitting. What if I only need two of the three outlets?Use the McAlpine 40K-CB Blanking Cap to seal the unused branch outlet cleanly and securely. Will the chrome nuts match my existing trap?If you have a McAlpine CP Brass trap, yes — the compression nuts are designed to match the chrome finish across the range. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 42E-CB Compression Tee: McAlpine 40K-CB Blanking Cap — For Chrome Plated Brass Compression Tee McAlpine Rubber Seal Reducers — R/SEAL-42X35 & R/SEAL-42X32 McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine 90° Bend — Chrome Brass x ABS Solvent Weld Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine 135° Chrome Plated Brass Compression Bend provides a shallow-angle directional change in a chrome waste pipe run, ideal for under-sink and vanity unit installations where a gentler curve is needed than a 90° bend allows. With sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range, this fitting delivers a clean, coordinated finish throughout. Available in 1¼" (35B-CB) and 1½" (42B-CB). Key Features 135° bend angle: Gentle directional change — ideal where a 90° turn would be too sharp or restrict flow Chrome plated brass compression: Premium finish that matches McAlpine CP Brass trap compression nuts Two sizes available: 1¼" (35B-CB) and 1½" (42B-CB) — select above Part of the McAlpine CP Chrome Plated Brass Waste range: Designed to integrate with other fittings in the CP Brass collection Compression connection: No solvent cement required — straightforward installation Technical Specification Brand: McAlpine SKUs: 35B-CB (1¼" / 35mm) | 42B-CB (1½" / 42mm) Bend angle: 135° Material: Chrome plated brass Connection type: Compression Available sizes: 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions What is the difference between a 90° and 135° bend?A 90° bend creates a right-angle turn. A 135° bend creates a shallower, more gradual directional change (equivalent to a 45° offset from straight). The 135° option is preferred where there is limited clearance for a sharp turn, or where a gentler flow path is needed to reduce the risk of blockages. Which size do I need?1¼" (35mm) is standard for basin and bidet waste outlets. 1½" (42mm) is used for bath and shower waste. Match to your existing trap or waste pipe size. Will the chrome nuts match my existing McAlpine trap?Yes — if you have a McAlpine CP Brass trap, the compression nuts on this bend are designed to match the chrome finish across the range. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 135° Chrome Brass Compression Bend: McAlpine Chrome Plated Brass Compression Tee — 42E-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine 90° Chrome Plated Brass Compression Bend provides a right-angle directional change in a chrome waste pipe run, with sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range for a consistent, premium finish. Available in three sizes — 32mm Euro (32A-CB), 1¼" (35A-CB) and 1½" (42A-CB) — covering the full range of standard UK and European waste pipe diameters. Ideal for under-sink, vanity unit, and basin waste installations. Key Features 90° bend angle: Right-angle directional change for waste pipe runs Chrome plated brass compression: Premium finish matching McAlpine CP Brass trap compression nuts Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Covers UK and European pipe sizes: 32mm Euro and 35mm UK 1¼" are both available Part of the McAlpine CP Chrome Plated Brass Waste range Compression connection: No solvent cement required Technical Specification Brand: McAlpine SKUs: 32A-CB (32mm Euro) | 35A-CB (1¼" / 35mm) | 42A-CB (1½" / 42mm) Bend angle: 90° Material: Chrome plated brass Connection type: Compression Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial size for basin and bidet wastes. 1½" (42mm) is used for bath and shower waste. Match to your existing trap outlet or waste pipe diameter. What is the difference between 32mm Euro and 1¼"?These are close but not the same — 32mm is the European metric standard, 1¼" (approx. 35mm) is the UK imperial equivalent. Check your existing pipework carefully before ordering. If in doubt, rubber seal reducers can help adapt between sizes in some fittings. Need a gentler angle?If a 90° turn is too sharp for your installation, consider the McAlpine 135° Chrome Brass Compression Bend for a shallower directional change. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 90° Chrome Brass Compression Bend: McAlpine 135° Chrome Brass Compression Bend — 35B-CB / 42B-CB McAlpine Chrome Plated Brass Compression Tee — 42E-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine Chrome Plated Brass Compression Straight Connector provides a neat in-line join in a chrome waste pipe run, with sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range. Available in three sizes — 32mm Euro (32G-CB), 1¼" (35G-CB) and 1½" (42G-CB) — covering standard UK and European waste pipe diameters. Ideal for extending or joining sections of chrome waste pipe under sinks and in vanity units. Key Features Straight in-line connector: Joins two sections of chrome waste pipe with no change of direction Chrome plated brass compression: Premium finish matching McAlpine CP Brass trap compression nuts Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Covers UK and European pipe sizes: 32mm Euro and 35mm UK 1¼" both available Part of the McAlpine CP Chrome Plated Brass Waste range Compression connection: No solvent cement required Technical Specification Brand: McAlpine SKUs: 32G-CB (32mm Euro) | 35G-CB (1¼" / 35mm) | 42G-CB (1½" / 42mm) Fitting type: Straight connector Material: Chrome plated brass Connection type: Compression Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial size for basin and bidet wastes. 1½" (42mm) is standard for bath and shower waste. Match to your existing trap outlet or waste pipe diameter. What is the difference between 32mm Euro and 1¼"?32mm is the European metric standard; 1¼" (approx. 35mm) is the UK imperial equivalent. These are not the same — check your existing pipework before ordering. How does this differ from the ABS x brass straight connector?This fitting connects chrome brass pipe to chrome brass pipe — both ends are compression. If you need to transition from chrome brass to plastic ABS solvent weld pipe, see the McAlpine Straight Brass x ABS Connector instead. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine Chrome Brass Compression Straight Connector: McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine 135° Chrome Brass Compression Bend — 35B-CB / 42B-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine Chrome Plated Brass Wall Flange provides a neat, professional finish where a waste pipe exits through a wall or cabinet panel. Covering the gap around the pipe at the wall surface, it gives a clean chrome appearance that complements McAlpine’s CP Brass waste range and other chrome waste fittings. Available in three sizes to suit the most common UK and European waste pipe diameters. Key Features Neat wall finish: Covers the gap where waste pipe passes through a wall or cabinet panel Chrome plated brass: Premium, corrosion-resistant finish that complements McAlpine CP Brass waste fittings Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Part of the McAlpine CP Chrome Plated Brass Waste range Simple installation: Slides over the pipe and sits flush against the wall surface Technical Specification Brand: McAlpine SKUs: WALLFLANGE-CP32 (32mm Euro) | WALLFLANGE-CP35 (1¼" / 35mm) | WALLFLANGE-CP42 (1½" / 42mm) Material: Chrome plated brass Type: Wall flange / pipe cover plate / escutcheon Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Select the size to match your waste pipe diameter. 32mm Euro and 1¼" (35mm) are standard for basin and bidet waste pipes. 1½" (42mm) is used for bath and shower waste. If in doubt, measure the outside diameter of your waste pipe. What is the difference between 32mm Euro and 1¼"?32mm is the European metric standard; 1¼" (approx. 35mm) is the traditional UK imperial size. These are not interchangeable — check your pipe before ordering. Can I use this with plastic waste pipe?Yes — the wall flange simply slides over the pipe regardless of material (chrome brass or plastic), as long as you select the correct diameter. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine Chrome Brass Wall Flange: McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld Also explore our full range of small plumbing fittings and accessories.

Read more less

The McAlpine Chrome Pipe Clip secures plastic waste pipe to a wall or surface with a sleek chrome finish that matches McAlpine’s CP Brass trap range. Ideal for use alongside chrome waste fittings where a consistent, premium appearance is required throughout the installation. Available in 32mm Euro, 1¼" and 1½" to suit the most common waste pipe diameters. Sold individually — per clip. Key Features Chrome finish: Matches McAlpine CP Brass trap compression nuts for a coordinated look For plastic waste pipe: Designed to clip and secure standard plastic waste pipe to wall or surface Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Sold per clip: Order the exact quantity you need Part of the McAlpine CP Chrome Plated Brass Waste range Simple screw-fix installation Technical Specification Brand: McAlpine SKUs: S32-CP (32mm Euro) | S35-CP (1¼" / 35mm) | T42-CP (1½" / 42mm) Material: Chrome plated plastic Type: Pipe clip / pipe bracket Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) Sold: Individually (per clip) For use with: Plastic waste pipe; complements McAlpine CP Chrome Plated Brass Waste range Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Select the size to match your waste pipe diameter. 32mm Euro and 1¼" (35mm) are standard for basin and bidet waste pipes. 1½" (42mm) is used for bath and shower waste. Measure the outside diameter of your pipe if unsure. How many clips do I need?As a general guide, pipe clips should be fitted every 400–500mm on horizontal runs to prevent sagging, and at closer intervals on vertical runs. Order the quantity you need — each clip is sold separately. Will this work with chrome brass pipe as well as plastic?These clips are designed for plastic waste pipe. For securing chrome brass waste pipe, a different clip type may be required — contact us if you need advice. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside McAlpine Chrome Pipe Clips: McAlpine Chrome Plated Brass Wall Flange — 32mm, 1¼" & 1½" McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB Also explore our full range of small plumbing fittings and accessories.

Read more less

McAlpine Chrome Plated Brass Waste Pipe supplied in 1 metre lengths, available in three standard sizes to suit UK and European waste pipe installations. With a sleek chrome finish that matches the rest of the McAlpine CP Brass range, this pipe is ideal for under-sink, basin, and vanity unit waste runs where a premium, coordinated appearance is required. Key Features 1 metre length: Standard length for most under-sink waste runs, cut to size as required Chrome plated brass: Premium finish matching McAlpine CP Brass trap compression nuts and fittings Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Part of the McAlpine CP Chrome Plated Brass Waste range: Compatible with all McAlpine CP brass compression fittings, bends, tees and connectors Can be cut to length: Standard pipe cutter or hacksaw can be used to cut to the required length Technical Specification Brand: McAlpine SKUs: PIPE32-1000-CB (32mm Euro) | PIPE35-1000-CB (1¼" / 35mm) | PIPE42-1000-CB (1½" / 42mm) Length: 1000mm (1 metre) Material: Chrome plated brass Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Fittings (compression bends, straight connectors, tees, wall flanges) Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial standard for basin and bidet wastes. 1½" (42mm) is used for bath and shower waste. Match to your existing trap outlet or fittings. What is the difference between 32mm Euro and 1¼"?32mm is the European metric standard; 1¼" (approx. 35mm) is the UK imperial equivalent. These are not interchangeable — check your existing fittings carefully before ordering. Can this pipe be cut to a shorter length?Yes — chrome brass waste pipe can be cut with a standard pipe cutter or fine-tooth hacksaw. Deburr the cut end before fitting to ensure a watertight compression joint. When will my order be dispatched?This item is ordered in specially for you. Please allow approximately 4 working days for dispatch. Can I order if the item shows as out of stock?Yes — this item is ordered in to fulfil your order and will typically be dispatched within 4–5 working days. Complete Your Chrome Waste Pipe Installation Pair your chrome waste pipe with the rest of the McAlpine CP Brass range: McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine 135° Chrome Brass Compression Bend — 35B-CB / 42B-CB McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine Chrome Plated Brass Compression Tee — 42E-CB McAlpine Chrome Brass Wall Flange — 32mm, 1¼" & 1½" McAlpine Chrome Pipe Clips — 32mm, 1¼" & 1½" Also explore our full range of plumbing fittings and accessories.

Read more less

The McAlpine CA32MINI-CB is a chrome plated brass adjustable inlet cylindrical bottle trap with a 50mm water seal and 32mm European outlet. Supplied as a complete kit including a 12" (300mm) length of 32mm OD chrome plated brass waste pipe and a chrome wall flange — everything you need for a neat, fully chrome waste run from basin to wall. Also supplied with the MS4-32SOLVENT fitting to convert to 1¼" UK pipe size where required. Conforms to BS EN 274-1:2002. Key Features 50mm water seal: Meets current UK building regulations for water seal depth Adjustable inlet: Allows the trap inlet to be positioned at different heights to suit various basin waste outlet positions 32mm European outlet: Standard metric outlet for connection to European waste pipe systems Cylindrical bottle trap design: Compact form factor — ideal for pedestal basins and wall-hung basins with limited under-sink space Complete kit: Includes 12" (300mm) chrome plated brass waste pipe and chrome wall flange UK size adaptor included: MS4-32SOLVENT fitting converts outlet to 1¼" UK pipe size Chrome plated brass construction: Corrosion-resistant, premium finish that complements McAlpine CP Brass waste fittings Conforms to BS EN 274-1:2002: Meets current British Standard for waste fittings Technical Specification Brand: McAlpine SKU: CA32MINI-CB Type: Cylindrical bottle trap (adjustable inlet) Material: Chrome plated brass Water seal: 50mm Outlet size: 32mm European Included: Bottle trap, 12" (300mm) x 32mm OD chrome brass waste pipe, chrome wall flange, MS4-32SOLVENT UK size adaptor Standard: BS EN 274-1:2002 Country of Origin: United Kingdom Frequently Asked Questions What is included in the kit?The CA32MINI-CB is supplied with the chrome bottle trap, a 12" (300mm) length of 32mm OD chrome plated brass waste pipe, a chrome wall flange, and the MS4-32SOLVENT fitting for converting to 1¼" UK pipe size. What does ‘adjustable inlet’ mean?The trap inlet can be adjusted up or down to align with the waste outlet on your basin — useful where the basin waste outlet height doesn’t align perfectly with a fixed trap position. Does this meet building regulations?Yes — the 50mm water seal meets current UK building regulations requirements, and the trap conforms to BS EN 274-1:2002. Can I connect this to UK 1¼" waste pipe instead of 32mm Euro pipe?Yes — the MS4-32SOLVENT fitting is included to convert the 32mm European outlet to 1¼" UK pipe size. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Complete Your Chrome Waste Installation Frequently bought alongside the McAlpine CA32MINI-CB Chrome Bottle Trap: McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine Chrome Plated Brass Waste Pipe — 1m Length | 32mm, 1¼" & 1½" McAlpine Chrome Brass Wall Flange — 32mm, 1¼" & 1½" Also explore our full range of plumbing fittings and accessories.

Read more less