A curated selection of smaller bathroom products where a delivery charge applies. These items are posted rather than delivered by pallet or courier, making them ideal for quick, straightforward delivery to your door.
Small Items (Delivery Charge Applies)
-
Bell 4W LED Dimmable Candle Bulb | SBC B15 | 2700K Warm White | Clear Glass | Clearance
A premium dimmable LED candle bulb at a clearance price. The Bell 4W LED Dimmable Candle Bulb (SKU: 05144) delivers warm, atmospheric light with smooth dimming control — perfect for chandeliers, wall lights, pendant fittings, and decorative fixtures with small bayonet cap (SBC/B15) sockets. Crystal-clear glass finish for elegant, sparkling light distribution. Key Features 4W LED — replaces 40W incandescent; saves up to 90% on energy costs Dimmable — smooth dimming control for perfect ambience 2700K Warm White — cosy, traditional incandescent-style warmth Clear Glass Finish — elegant, sparkling appearance in open fittings 150° Beam Angle — wide light distribution; ideal for decorative fittings 25,000 Hour Lifespan — up to 22 years with typical use Instant Full Brightness — no warm-up delay SBC/B15 Cap — small bayonet cap; fits standard B15 lamp holders Technical Specification Brand: Bell Lighting SKU / Part Number: 05144 Barcode (EAN): 5013588051444 Power: 4W LED (replaces 40W incandescent) Cap Type: SBC (Small Bayonet Cap / B15) Colour Temperature: 2700K Warm White Voltage: 240V Frequency: 50/60Hz Beam Angle: 150° Lifespan: 25,000 hours Switching Cycles: 12,500 Energy Consumption: 4kWh per 1,000 hours Dimmable: Yes Finish: Clear Glass Frequently Asked Questions Will this fit my light fitting?This bulb uses an SBC (Small Bayonet Cap / B15) fitting — a small two-pin bayonet cap. Check your existing bulb or lamp holder to confirm it takes a B15 cap before ordering. It is not compatible with BC/B22 (large bayonet) or ES/E27 (screw) fittings. Is this bulb dimmable?Yes — this bulb is fully dimmable. Ensure your dimmer switch is compatible with LED lamps. If you’re unsure, contact us on 01603 381095 and we’ll advise. What does 2700K mean?2700K is a warm white colour temperature, very close to traditional incandescent bulbs. It creates a cosy, welcoming atmosphere and is ideal for living rooms, bedrooms, hallways, and decorative fittings. What is the difference between SBC (B15) and BC (B22)?SBC (B15) is the small bayonet cap — 15mm pin spacing, commonly used in smaller decorative fittings, chandeliers, and wall lights. BC (B22) is the standard large bayonet cap — 22mm pin spacing, used in most standard UK ceiling pendants. This bulb is B15 only. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£2.00
-
Tivoli Soft Close Toilet Seat – White – Top Fix – 2-Year Guarantee
The Tivoli Soft Close Toilet Seat brings quiet, effortless closing to your bathroom. Designed to pair with the Tivoli WC range, its compact 365×440mm footprint suits most standard toilet pans, while the top-fix design means installation is straightforward — no awkward underside access required. The lift-off function makes deep cleaning simple. ⚠️ Important — Please Check Dimensions Before Ordering: Full dimensions and a technical drawing are provided in the product images above. As a hygiene product, this item is non-returnable once the packaging has been opened — please ensure this seat fits your WC pan before purchasing. If you’re unsure, contact us at customerservice@bubblegumbathrooms.co.uk before ordering. Your statutory rights are not affected. Key Features Soft-close mechanism — silent, gentle closing; no slamming Top-fix installation — secured from above; no underside access needed Compact 365×440mm — suits most standard toilet pans Lift-off function — removes easily for thorough cleaning White gloss finish — coordinates with the full Tivoli range 2-year manufacturer guarantee Technical Specification Brand: Aqua Elegance Range: Tivoli Finish: White Closing mechanism: Soft-close Fixing type: Top fix Width: 365mm Depth: 440mm Height: 61mm Weight: 2kg Country of Origin: United Kingdom SKU: BGBP107422 · EAN: 5054913327636 Guarantee: 2 years Complete the Tivoli Collection Tivoli Close Coupled Toilet — Open Back, Comfort Height or Fully Shrouded Tivoli Back to Wall WC Pan — Standard or Comfort Height Tivoli 500×390mm Basin & Full Pedestal — 1 Tap Hole Tivoli 4-Piece Bathroom Suite — Basin, Pedestal, Rimless WC & Soft-Close Seat Tivoli Complete Bathroom Suite — 1700mm Bath | Chrome, Matt Black or Brushed Brass Frequently Asked Questions Will this seat fit my toilet? Please verify compatibility before ordering by checking the dimensions (365×440mm) against your toilet pan. As a hygiene product, this item is non-returnable once opened. Is this compatible with the Tivoli Close Coupled Toilet? Yes — this seat is designed to pair with the Tivoli range. It is also compatible with most standard toilet pans with similar dimensions. What does top-fix mean? Top-fix means the seat is secured from above using bolts that pass through the pan — no need to access the underside of the pan during installation. Does the seat lift off for cleaning? Yes — the lift-off function allows the seat to be removed completely from the hinges for thorough cleaning of both the seat and the pan. Can I order if the item shows as out of stock? Yes — we accept orders even when stock shows as zero. Items are dispatched as soon as stock is replenished. Contact us at customerservice@bubblegumbathrooms.co.uk if you need a lead time estimate.
£59.99
-
Cedarwood Slim Soft Close Toilet Seat | White | Top Fix | Lift-Off
The Cedarwood Slim Soft Close Toilet Seat brings a clean, considered finish to your WC. Its slim profile and crisp white glaze complement contemporary bathroom schemes, while the soft close mechanism ensures a quiet, controlled descent every time — no slamming, no fuss. Top fix hinges make installation straightforward, and the lift-off design allows easy removal for thorough cleaning. ⚠️ Important — Please Check Dimensions Before Ordering: Full dimensions and a technical drawing are provided in the product images above. As a hygiene product, this item is non-returnable once the packaging has been opened — please ensure this seat fits your WC pan before purchasing. If you’re unsure, contact us at customerservice@bubblegumbathrooms.co.uk before ordering. Your statutory rights are not affected. Key Features Soft close mechanism — quiet, gentle close every time Top fix hinges — simple installation and removal Lift-off design — easy, thorough cleaning Slim profile — sleek, unobtrusive styling Fits the Cedarwood WC range — direct replacement or upgrade 2-year manufacturer guarantee Technical Specification Range: Cedarwood Colour: White Material: Plastic Fixing: Top fix Height: 24mm Width: 358mm Depth: 414mm Packaged weight: 2.5kg Country of Origin: GB HS Code: 3922.20 SKU: DISA0034 Barcode: 5034109700795 Guarantee: 2 years Compatible WC Pans Cedarwood Rimless Short Projection Close Coupled WC Cedarwood Rimless Comfort Height Close Coupled WC Cedarwood Rimless Back to Wall WC Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Frequently Asked Questions Will this seat fit my toilet? This seat is designed to fit the Cedarwood WC range. The seat measures 358mm wide × 414mm deep. Please check the dimensions against your WC pan before ordering — as a hygiene product it cannot be returned once opened. How is the seat fixed? The seat uses top fix hinges, which are fitted from above without needing access underneath the pan. The seat is also lift-off for easy removal when cleaning. Is this seat soft close? Yes — the seat and lid both close slowly and silently via the built-in soft close mechanism. No slamming. How quickly will my order be dispatched? As this item is ordered in for you directly from our supplier, please allow 1–2 working days for dispatch. Delivery typically follows within a few working days of dispatch. Can I order if the item shows as out of stock? Yes — we accept orders even when stock shows as zero. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 if you need a lead time estimate. Browse All Toilet Seats — view all styles, shapes & materials
£89.00 £68.00
-
Victorian Bath Pillar Taps | Chrome | Cross-Top Handles | Sold as Pair | Aqua Elegance
Give your bathroom the authentic period character it deserves with these Aqua Elegance Victorian chrome bath pillar taps. Classic cross-top handles, a polished chrome finish, and a traditional pillar tap form make these a natural choice for freestanding roll-top baths, cast iron baths, and period-styled bathrooms. Sold as a pair — both hot and cold taps included — so you get a perfectly matched set straight out of the box. Key Features Sold as a pair — hot and cold taps both included Classic cross-top handles — authentic Victorian styling Polished chrome finish — timeless, corrosion-resistant, easy to maintain Deck-mounted design — requires 2 tap holes in your bath deck Ideal for roll-top & freestanding baths — suits period, heritage, and traditionally styled bathrooms By Aqua Elegance — quality traditional bathroom products Technical Specification Brand: Aqua Elegance SKU: K96057 Type: Bath pillar taps Sold as: Pair (hot and cold) Finish: Polished chrome Handle type: Cross-top Style: Victorian traditional Mounting: Deck mounted Tap holes required: 2 Complete the Victorian Collection Victorian Traditional Basin Pillar Taps — Chrome | Pair Victorian Basin Mixer Tap — Chrome Victorian Bath Shower Mixer Tap and Kit — Chrome Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Frequently Asked Questions Are these taps sold as a pair? Yes — both the hot and cold taps are included. You receive a complete, perfectly matched pair. How many tap holes does my bath need? These are deck-mounted pillar taps that require 2 tap holes — one for the hot tap and one for the cold tap. Are these suitable for a freestanding roll-top bath? Yes — provided your bath has 2 deck-mounted tap holes, these Victorian taps are an ideal match for freestanding and roll-top baths. What style of bathroom suits these taps? These are specifically designed for Victorian, Edwardian, period, heritage, and traditionally styled bathrooms. The cross-top handles and polished chrome finish are a classic combination that works beautifully alongside roll-top baths, traditional sanitaryware, and period tile schemes. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
£30.00
-
Kartell Square Adjustable Basin Bottle Trap | Chrome | 125mm | WAS025
Transform the look of a visible basin installation with the Kartell WAS025 square adjustable bottle trap. Where round traps disappear beneath a basin, this one earns its place — its sharp geometric profile and high-gloss chrome finish make it a deliberate design statement that complements wall-hung basins, glass vanity tops, and contemporary cloakroom suites. Built from solid brass with a corrosion-resistant chrome-plated finish, it's made to last and easy to keep clean. Key Features Square geometric profile — clean architectural lines that suit contemporary and minimalist schemes Adjustable height — variable adjustment to align with different basin waste outlets and wall waste pipe positions Solid brass construction — premium material for durability and long-term performance High-gloss chrome finish — corrosion-resistant, easy to clean, coordinates with chrome taps and accessories Compact 125mm width — fits beneath narrow vanity units and wall-hung basins with limited clearance 1-year Kartell guarantee — backed by the manufacturer Technical Specification Model: WAS025 Type: Adjustable basin bottle trap Profile: Square Width: 125mm Depth: 315mm Material: Solid brass Finish: Chrome plated (gloss) Weight: 0.82kg Adjustability: Variable height Guarantee: 1 year Brand: Kartell Complete the Kartell Wastes & Traps Range WAS025 — Square Adjustable Bottle Trap Chrome — you are here WAS030 — Adjustable Basin Bottle Trap Chrome Kartell Adjustable Basin Bottle Trap Chrome Round Bottom WAS006 — Easy Clean Basin Waste Chrome Slotted Clic-Clac WAS200 — Universal Basin Waste Chrome / Matt Black / Brushed Brass WAS001 — Basin Waste Chrome Brass Slotted with Metal Plug & Chain Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Frequently Asked Questions How quickly will my order be dispatched? If the item shows as in stock, it will be dispatched within 48 hours. If the item is showing as 0 stock, it is ordered in specially for you and will typically be dispatched within 4 working days. Is delivery free? Yes — free UK delivery is included on all Kartell products. Why choose a square bottle trap over a round one? Square bottle traps offer a more contemporary, architectural look that suits modern minimalist bathrooms. They're particularly effective in visible installations beneath wall-hung basins or glass vanity tops, where the trap becomes part of the overall design. Functionally they perform identically to round bottle traps. Is this trap suitable for all basins? This trap connects to standard UK basin waste fittings and the adjustable height allows it to accommodate different waste outlet and pipe positions. Always check inlet and outlet sizes match your basin waste and pipework before ordering. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
£58.00 £26.99
-
Scudo Lunar Square Exposed Shower Bar Valve | Brass & Chrome | Valve Only
Scudo Lunar Square Exposed Shower Bar Valve — Brass & Chrome The Scudo Lunar Square Exposed Shower Bar Valve is a replacement or standalone shower valve from the Lunar range — a square-body exposed bar valve finished in polished chrome with brass construction. The square profile gives a more contemporary edge compared to traditional round-body valves, while retaining the classic exposed aesthetic. WRAS approved and suitable for systems from 0.5 to 5 bar, it delivers reliable performance with a lifetime guarantee on the body and 12 months on moving parts. ⚠️ Valve only — riser rail, shower head, and handset are not included. This product is the bar valve unit only. Compatible accessories are available separately. Key Features Square exposed bar valve design — contemporary square body, surface mounted Brass & chrome finish — polished chrome with solid brass construction WRAS approved — compliant with UK Water Regulations Advisory Scheme Wide pressure range — suitable for 0.5 to 5 bar systems No diverter — single outlet configuration Lifetime guarantee on body — 12 months on moving parts Part of the Lunar range — by Scudo Technical Specification Brand: Scudo Range: Lunar Valve style: Exposed bar valve (square body) Finish: Brass / Chrome Material: Brass Diverter: No Minimum pressure: 0.5 bar Maximum pressure: 5 bar WRAS approved: Yes Guarantee: Lifetime on body; 12 months on moving parts SKU: BARVALVE001L What's Included Scudo Lunar square exposed bar valve unit Fixing hardware Installation instructions What's Not Included Riser rail Shower head or handset Shower hose Browse our full range of shower accessories and enclosures. Frequently Asked Questions Is the riser rail and shower head included? No — this listing is for the bar valve unit only. The riser rail, shower head, and handset are not included and must be purchased separately. What is the difference between the Lunar and Middleton valves? The Lunar has a square body for a more contemporary look, while the Middleton has a round body for a more traditional aesthetic. Both are WRAS approved and share the same pressure range and guarantee terms. What pressure is this valve suitable for? The Lunar bar valve is suitable for systems with a minimum pressure of 0.5 bar and a maximum of 5 bar. If you are unsure of your system pressure, please contact us before ordering. Is this valve WRAS approved? Yes — the Scudo Lunar bar valve is WRAS approved, confirming compliance with UK Water Regulations Advisory Scheme requirements. What guarantee does this valve carry? The valve body carries a lifetime guarantee. Moving parts are covered for 12 months. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time for out-of-stock items.
£167.00 £59.00
-
Geberit AquaClean Large Remote Control | For Mera Classic & Mera Comfort | 245.840.01.1
Control every function of your Geberit AquaClean Mera shower toilet with ease using this genuine Geberit AquaClean Large Remote Control. Designed for wall mounting and battery powered, it gives you intuitive, at-a-glance access to all your Mera's personalised settings — ideal for those who prefer a dedicated controller over the in-lid panel. Key Features Compatible with Geberit AquaClean Mera Classic and Mera Comfort shower toilets Wall-mounted holder included — mounts neatly beside the toilet Battery powered — no wiring required for installation Large format design — easy to read and operate Genuine Geberit spare/accessory part — guaranteed compatibility SKU / Part Number: 245.840.01.1 Technical Specification Brand: Geberit SKU / Part Number: 245.840.01.1 Type: Remote Control Compatible With: Geberit AquaClean Mera Classic, Geberit AquaClean Mera Comfort Mounting: Wall-mounted (holder included) Power Source: Battery powered Country of Origin: Switzerland Complete Your AquaClean Mera Setup Geberit AquaClean Descaling Agent 125ml — Official for Mera & Alba Geberit AquaClean Cleaning Set Geberit AquaClean Cleaning Agent Geberit AquaClean Alba Wall-Hung Shower Toilet Frequently Asked Questions Which AquaClean models is this remote control compatible with? This large remote control is designed specifically for the Geberit AquaClean Mera Classic and Mera Comfort shower toilets. It is not compatible with other AquaClean models such as the Tuma, Sela, or Alba. If you're unsure, please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Does it require any wiring or electrical installation? No — the remote control is battery powered, so it simply mounts to the wall using the included holder with no electrical installation required. Is the wall-mounted holder included? Yes — the wall-mounted holder is supplied with the remote control. Is this a genuine Geberit part? Yes — this is an original Geberit accessory, ensuring full compatibility and reliable performance with your AquaClean Mera shower toilet. Can I order if the item shows as out of stock? Yes — you can still place your order even if this item shows as out of stock. We will fulfil your order as soon as stock is available. If you need an estimated lead time, please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£106.00
-
McAlpine ABS Solvent Weld Adaptor | Converts Brass Compression to Plastic Waste Pipe | 32mm, 35mm & 42mm
The McAlpine ABS Solvent Weld Adaptor provides a simple, reliable conversion between chrome plated brass compression waste fittings and plastic ABS solvent weld waste pipe. Manufactured to BS EN 1329-1:2020, these adaptors are designed for use with McAlpine CP Brass Waste Pipe and Fittings and are available in three sizes to suit the most common waste pipe configurations. Key Features Converts brass compression to ABS solvent weld: Seamlessly joins chrome plated brass compression fittings to plastic solvent weld waste pipe Three sizes available: 32mm to 1¼", 35mm to 1¼", and 42mm to 1½" — select your size above Manufactured to BS EN 1329-1:2020: Meets current British Standard for plastic piping systems for soil and waste discharge For use with McAlpine CP Brass Waste range: Designed to work with McAlpine’s chrome plated brass waste pipe and fittings ABS construction: Durable, corrosion-resistant material suitable for waste water applications Easy DIY installation: No specialist tools required Technical Specification Brand: McAlpine SKUs: ABSCON-32X1.25 (32mm to 1¼") | ABSCON-35X1.25 (35mm to 1¼") | ABSCON-42X1.5 (42mm to 1½") Material: ABS plastic Standard: BS EN 1329-1:2020 Connection type: Brass compression inlet to ABS solvent weld outlet Available sizes: 32mm × 1¼", 35mm × 1¼", 42mm × 1½" For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Match the size to your existing waste pipe diameter. 32mm and 35mm are common for basin and bidet wastes; 42mm is typically used for bath and shower waste applications. If unsure, measure your existing pipe or check your fitting specifications. Will this work with any brass compression fitting?This adaptor is designed specifically for use with McAlpine CP Chrome Plated Brass compression waste fittings. Compatibility with other brands cannot be guaranteed — contact us if you need advice. Do I need solvent cement to complete the joint?Yes — the outlet side of this adaptor is a solvent weld connection and requires solvent cement. We recommend McAlpine SolvPro Solvent Cement (SVPR-1 / SVPR-2) for a secure, WRAS-approved joint. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine ABS Solvent Weld Adaptor: McAlpine SolvPro Solvent Cement with Dauber Applicator — WRAS Approved | UV Detectable McAlpine Supereasy Close Coupling Kit — CC-KIT / CC-KIT2 Also explore our full range of small plumbing fittings and accessories.
£1.09 - £1.30
-
McAlpine 90° Bend | Chrome Plated Brass Compression x ABS Solvent Weld | 1¼" & 1½"
The McAlpine 90° Chrome Plated Brass Compression x ABS Solvent Weld Bend allows a right-angle change of direction in a waste pipe run, combining a chrome plated brass compression inlet with an ABS solvent weld outlet. Ideal for under-sink and basin waste installations where a neat, chrome-finished connection is required. Available in 1¼" (32/35mm) and 1½" (42/43mm) sizes. Key Features 90° bend: Right-angle direction change for waste pipe runs Chrome plated brass compression inlet: Smart, corrosion-resistant finish for exposed pipework ABS solvent weld outlet: Secure, permanent connection to plastic waste pipe Two sizes available: 1¼" x 32/35mm and 1½" x 42/43mm — select above Dual-fit 1¼" version: Supplied with 2 rubber washers, allowing the chrome compression nut to fit both 32mm European and 35mm UK chrome brass pipe Part of the McAlpine CP Chrome Plated Brass Waste range: Designed to work with McAlpine CP brass waste fittings Easy installation: Standard compression and solvent weld connections Technical Specification Brand: McAlpine SKUs: ABS32/35A-CB (1¼" x 32/35mm) | ABS42/43A-CB (1½" x 42/43mm) Bend angle: 90° Inlet connection: Chrome plated brass compression Outlet connection: ABS solvent weld Available sizes: 1¼" x 32/35mm | 1½" x 42/43mm 1¼" version includes: 2 rubber washers (fits 32mm European and 35mm UK pipe) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?1¼" (32/35mm) is standard for basin and bidet waste outlets. 1½" (42/43mm) is used for bath and shower waste. Match the size to your existing waste pipe or trap outlet. What is the difference between 32mm and 35mm?32mm is the European standard for chrome waste pipe; 35mm is the traditional UK size. The 1¼" version of this fitting is supplied with two rubber washers so the compression nut fits both — no need to buy separate fittings for each pipe size. Do I need solvent cement for the ABS outlet?Yes — the ABS outlet is a solvent weld connection. We recommend McAlpine SolvPro Solvent Cement (SVPR-1 / SVPR-2) for a secure, WRAS-approved joint. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside this fitting: McAlpine SolvPro Solvent Cement — WRAS Approved | UV Detectable | SVPR-1 / SVPR-2 McAlpine ABS Solvent Weld Adaptor — Converts Brass Compression to Plastic Waste Pipe Also explore our full range of small plumbing fittings and accessories.
£2.90 - £5.40
-
McAlpine Straight Connector | Chrome Plated Brass Compression x ABS Solvent Weld | 1¼" & 1½"
The McAlpine Straight Chrome Plated Brass Compression x ABS Solvent Weld Connector provides a straight in-line join between chrome plated brass compression waste fittings and ABS plastic solvent weld pipework. Perfect for situations where a run of chrome brass waste pipe needs to transition back to plastic, keeping the installation neat and code-compliant. Designed for use with ABS solvent weld pipes and fittings conforming to BS EN 1329-1. Available in 1¼" (32/35mm) and 1½" (42/43mm). Key Features Straight connector: In-line join with no change of direction Chrome plated brass compression inlet: Smart finish for exposed pipework, compatible with McAlpine CP brass waste range ABS solvent weld outlet: Permanent, secure connection to plastic waste pipe Two sizes available: 1¼" x 32/35mm and 1½" x 42/43mm — select above Dual-fit 1¼" version: Fits both 32mm European and 35mm UK chrome brass pipe Compliant with BS EN 1329-1: For use with ABS waste pipes and fittings meeting this standard Part of the McAlpine CP Chrome Plated Brass Waste range Technical Specification Brand: McAlpine SKUs: ABS32/35G-CB (1¼" x 32/35mm) | ABS42/43G-CB (1½" x 42/43mm) Fitting type: Straight connector Inlet connection: Chrome plated brass compression Outlet connection: ABS solvent weld Available sizes: 1¼" x 32/35mm | 1½" x 42/43mm Standard: BS EN 1329-1 For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?1¼" (32/35mm) is standard for basin and bidet waste outlets. 1½" (42/43mm) is used for bath and shower waste. Match the size to your existing waste pipe or trap outlet. What is the difference between 32mm and 35mm?32mm is the European standard pipe size; 35mm is the traditional UK size. The 1¼" version of this connector fits both — no separate fittings needed. Do I need solvent cement for the ABS outlet?Yes — the ABS outlet requires solvent cement. We recommend McAlpine SolvPro Solvent Cement (SVPR-1 / SVPR-2) for a secure, WRAS-approved joint. How does this differ from the 90° bend version?This is a straight connector — no change of direction. If you need a right-angle turn in your waste run, see the McAlpine 90° Bend Chrome Brass x ABS Connector instead. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside this connector: McAlpine 90° Bend — Chrome Plated Brass x ABS Solvent Weld McAlpine SolvPro Solvent Cement — WRAS Approved | UV Detectable McAlpine ABS Solvent Weld Adaptor — Converts Brass Compression to Plastic Waste Pipe Also explore our full range of small plumbing fittings and accessories.
£2.40 - £5.00
-
McAlpine Rubber Seal Reducer for Chrome Plated Brass Waste Fittings | 3 Sizes
The McAlpine Synthetic Rubber Seal Reducer is a simple but essential component for adapting chrome plated brass compression waste fittings to smaller pipe sizes. Used when connecting pipe of a different diameter into a compression fitting, these reducers ensure a watertight seal without the need for replacement fittings. Designed for use with the McAlpine CP Chrome Plated Brass Waste Pipe and Fittings range, available in three sizes to cover the most common waste pipe combinations. Key Features Reduces compression fitting to smaller pipe size: Allows a fitting designed for a larger pipe to accept a smaller diameter pipe with a watertight seal Synthetic rubber construction: Flexible, durable and resistant to waste water Three sizes available: 1¼" x 32mm Euro, 1½" x 32mm Euro, and 1½" x 1¼" — select above For use with McAlpine CP Brass Waste range: Designed to work with McAlpine chrome plated brass compression waste fittings Quick and easy to fit: Simply insert into the compression fitting before tightening Technical Specification Brand: McAlpine SKUs: R/SEAL-35X32 (1¼" x 32mm Euro) | R/SEAL-42X32 (1½" x 32mm Euro) | R/SEAL-42X35 (1½" x 1¼") Material: Synthetic rubber Type: Seal reducer / reducing washer Available sizes: 1¼" x 32mm Euro | 1½" x 32mm Euro | 1½" x 1¼" For use with: McAlpine CP Chrome Plated Brass Compression Waste Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Select based on your fitting size and the pipe you are connecting into it. For example, if you have a 1½" compression fitting but need to connect a 32mm European pipe, choose the 1½" x 32mm Euro option. If connecting a 1¼" pipe into a 1½" fitting, choose 1½" x 1¼". What is the difference between 32mm Euro and 1¼"?32mm Euro refers to the metric European standard pipe diameter; 1¼" (approximately 35mm) is the traditional UK imperial size. These are close but not interchangeable — make sure you select the correct reducer for your pipe. Will this work with other brands of brass compression fittings?These reducers are designed for the McAlpine CP range. Compatibility with other brands cannot be guaranteed — contact us if you need advice. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside McAlpine Rubber Seal Reducers: McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine 90° Bend — Chrome Brass x ABS Solvent Weld McAlpine ABS Solvent Weld Adaptor — Converts Brass Compression to Plastic Waste Pipe Also explore our full range of small plumbing fittings and accessories.
£0.40 - £0.55
-
McAlpine Blanking Cap for Chrome Plated Brass Compression Tee | 40K-CB | For Use with 42E-CB
The McAlpine 40K-CB Blanking Cap is designed specifically to seal the unused branch outlet on the McAlpine 42E-CB Chrome Plated Brass Compression Tee. When only two of the three outlets on a tee are required, this cap provides a clean, secure blank-off — keeping the installation watertight and neatly finished. Part of the McAlpine CP Chrome Plated Brass Waste Pipe and Fittings range. Key Features Designed for the McAlpine 42E-CB compression tee: Precision-fit blank-off cap for the unused branch outlet Seals unused outlet: Keeps your waste installation watertight where a tee branch is not required Chrome plated brass: Matches the finish of the 42E-CB tee for a consistent appearance Part of the McAlpine CP Brass Waste range: Designed to integrate with McAlpine chrome plated brass waste fittings Simple installation: Compression fit — no tools required Technical Specification Brand: McAlpine SKU: 40K-CB Type: Blanking cap / blank-off plug Material: Chrome plated brass For use with: McAlpine 42E-CB Chrome Plated Brass Compression Tee Connection type: Compression Country of Origin: United Kingdom Frequently Asked Questions Which fitting does this cap work with?The 40K-CB is designed specifically for the McAlpine 42E-CB Chrome Plated Brass Compression Tee. It is not a universal cap — please confirm you have the 42E-CB tee before ordering. When would I need a blanking cap?A blanking cap is used when you have a compression tee installed but only need two of the three outlets — for example, when a branch connection is no longer required or was fitted speculatively for future use. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 40K-CB Blanking Cap: McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine 90° Bend — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.
£1.20
-
McAlpine Chrome Plated Brass Compression Tee | 42E-CB | 1½" | Reducible to 1¼" & 32mm
The McAlpine 42E-CB Chrome Plated Brass Compression Tee is a premium quality three-way waste fitting with sleek chrome plated compression nuts that complement McAlpine’s CP Brass trap range. With 1½" compression outlets as standard, the tee can be reduced to accept 1¼" or 32mm European pipe using separately available synthetic rubber seal reducers — making it one of the most versatile fittings in the CP Brass range. Ideal for under-sink and vanity unit waste installations where a neat, chrome finish is required. Key Features 1½" compression outlets: Standard size for bath and shower waste applications Reducible to 1¼" and 32mm Euro: Using seal reducers R/SEAL-42X35 and R/SEAL-42X32 (sold separately) Chrome plated brass compression nuts: Sleek finish that matches McAlpine CP Brass trap nuts for a consistent look throughout Three-way tee configuration: Allows two waste pipes to combine into one outlet Blanking cap available: Use 40K-CB (sold separately) to blank off an unused branch outlet Part of the McAlpine CP Chrome Plated Brass Waste range Technical Specification Brand: McAlpine SKU: 42E-CB Type: Compression tee Material: Chrome plated brass Outlet size: 1½" compression (standard) Reducible to: 1¼" (using R/SEAL-42X35) | 32mm Euro (using R/SEAL-42X32) Connection type: Compression For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Can I use this tee with smaller pipe sizes?Yes — the 42E-CB accepts 1½" pipe as standard. Using McAlpine rubber seal reducers (R/SEAL-42X35 for 1¼", R/SEAL-42X32 for 32mm Euro), you can connect smaller diameter pipe into any of the three outlets without replacing the fitting. What if I only need two of the three outlets?Use the McAlpine 40K-CB Blanking Cap to seal the unused branch outlet cleanly and securely. Will the chrome nuts match my existing trap?If you have a McAlpine CP Brass trap, yes — the compression nuts are designed to match the chrome finish across the range. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 42E-CB Compression Tee: McAlpine 40K-CB Blanking Cap — For Chrome Plated Brass Compression Tee McAlpine Rubber Seal Reducers — R/SEAL-42X35 & R/SEAL-42X32 McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine 90° Bend — Chrome Brass x ABS Solvent Weld Also explore our full range of small plumbing fittings and accessories.
£40.00
-
McAlpine 135° Chrome Plated Brass Compression Bend | 1¼" & 1½" | 35B-CB / 42B-CB
The McAlpine 135° Chrome Plated Brass Compression Bend provides a shallow-angle directional change in a chrome waste pipe run, ideal for under-sink and vanity unit installations where a gentler curve is needed than a 90° bend allows. With sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range, this fitting delivers a clean, coordinated finish throughout. Available in 1¼" (35B-CB) and 1½" (42B-CB). Key Features 135° bend angle: Gentle directional change — ideal where a 90° turn would be too sharp or restrict flow Chrome plated brass compression: Premium finish that matches McAlpine CP Brass trap compression nuts Two sizes available: 1¼" (35B-CB) and 1½" (42B-CB) — select above Part of the McAlpine CP Chrome Plated Brass Waste range: Designed to integrate with other fittings in the CP Brass collection Compression connection: No solvent cement required — straightforward installation Technical Specification Brand: McAlpine SKUs: 35B-CB (1¼" / 35mm) | 42B-CB (1½" / 42mm) Bend angle: 135° Material: Chrome plated brass Connection type: Compression Available sizes: 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions What is the difference between a 90° and 135° bend?A 90° bend creates a right-angle turn. A 135° bend creates a shallower, more gradual directional change (equivalent to a 45° offset from straight). The 135° option is preferred where there is limited clearance for a sharp turn, or where a gentler flow path is needed to reduce the risk of blockages. Which size do I need?1¼" (35mm) is standard for basin and bidet waste outlets. 1½" (42mm) is used for bath and shower waste. Match to your existing trap or waste pipe size. Will the chrome nuts match my existing McAlpine trap?Yes — if you have a McAlpine CP Brass trap, the compression nuts on this bend are designed to match the chrome finish across the range. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 135° Chrome Brass Compression Bend: McAlpine Chrome Plated Brass Compression Tee — 42E-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.
£23.50 - £30.50
-
McAlpine 90° Chrome Plated Brass Compression Bend | 32mm, 1¼" & 1½" | 32A-CB / 35A-CB / 42A-CB
The McAlpine 90° Chrome Plated Brass Compression Bend provides a right-angle directional change in a chrome waste pipe run, with sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range for a consistent, premium finish. Available in three sizes — 32mm Euro (32A-CB), 1¼" (35A-CB) and 1½" (42A-CB) — covering the full range of standard UK and European waste pipe diameters. Ideal for under-sink, vanity unit, and basin waste installations. Key Features 90° bend angle: Right-angle directional change for waste pipe runs Chrome plated brass compression: Premium finish matching McAlpine CP Brass trap compression nuts Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Covers UK and European pipe sizes: 32mm Euro and 35mm UK 1¼" are both available Part of the McAlpine CP Chrome Plated Brass Waste range Compression connection: No solvent cement required Technical Specification Brand: McAlpine SKUs: 32A-CB (32mm Euro) | 35A-CB (1¼" / 35mm) | 42A-CB (1½" / 42mm) Bend angle: 90° Material: Chrome plated brass Connection type: Compression Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial size for basin and bidet wastes. 1½" (42mm) is used for bath and shower waste. Match to your existing trap outlet or waste pipe diameter. What is the difference between 32mm Euro and 1¼"?These are close but not the same — 32mm is the European metric standard, 1¼" (approx. 35mm) is the UK imperial equivalent. Check your existing pipework carefully before ordering. If in doubt, rubber seal reducers can help adapt between sizes in some fittings. Need a gentler angle?If a 90° turn is too sharp for your installation, consider the McAlpine 135° Chrome Brass Compression Bend for a shallower directional change. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine 90° Chrome Brass Compression Bend: McAlpine 135° Chrome Brass Compression Bend — 35B-CB / 42B-CB McAlpine Chrome Plated Brass Compression Tee — 42E-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.
£23.50 - £30.50
-
McAlpine Chrome Plated Brass Compression Straight Connector | 32mm, 1¼" & 1½" | 32G-CB / 35G-CB / 42G-CB
The McAlpine Chrome Plated Brass Compression Straight Connector provides a neat in-line join in a chrome waste pipe run, with sleek chrome plated compression nuts that match McAlpine’s CP Brass trap range. Available in three sizes — 32mm Euro (32G-CB), 1¼" (35G-CB) and 1½" (42G-CB) — covering standard UK and European waste pipe diameters. Ideal for extending or joining sections of chrome waste pipe under sinks and in vanity units. Key Features Straight in-line connector: Joins two sections of chrome waste pipe with no change of direction Chrome plated brass compression: Premium finish matching McAlpine CP Brass trap compression nuts Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Covers UK and European pipe sizes: 32mm Euro and 35mm UK 1¼" both available Part of the McAlpine CP Chrome Plated Brass Waste range Compression connection: No solvent cement required Technical Specification Brand: McAlpine SKUs: 32G-CB (32mm Euro) | 35G-CB (1¼" / 35mm) | 42G-CB (1½" / 42mm) Fitting type: Straight connector Material: Chrome plated brass Connection type: Compression Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial size for basin and bidet wastes. 1½" (42mm) is standard for bath and shower waste. Match to your existing trap outlet or waste pipe diameter. What is the difference between 32mm Euro and 1¼"?32mm is the European metric standard; 1¼" (approx. 35mm) is the UK imperial equivalent. These are not the same — check your existing pipework before ordering. How does this differ from the ABS x brass straight connector?This fitting connects chrome brass pipe to chrome brass pipe — both ends are compression. If you need to transition from chrome brass to plastic ABS solvent weld pipe, see the McAlpine Straight Brass x ABS Connector instead. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine Chrome Brass Compression Straight Connector: McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine 135° Chrome Brass Compression Bend — 35B-CB / 42B-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld McAlpine Rubber Seal Reducers — For Chrome Plated Brass Waste Fittings Also explore our full range of small plumbing fittings and accessories.
£21.50 - £27.50
-
McAlpine Chrome Plated Brass Wall Flange | 32mm, 1¼" & 1½" | Waste Pipe Pipe Cover Plate
The McAlpine Chrome Plated Brass Wall Flange provides a neat, professional finish where a waste pipe exits through a wall or cabinet panel. Covering the gap around the pipe at the wall surface, it gives a clean chrome appearance that complements McAlpine’s CP Brass waste range and other chrome waste fittings. Available in three sizes to suit the most common UK and European waste pipe diameters. Key Features Neat wall finish: Covers the gap where waste pipe passes through a wall or cabinet panel Chrome plated brass: Premium, corrosion-resistant finish that complements McAlpine CP Brass waste fittings Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Part of the McAlpine CP Chrome Plated Brass Waste range Simple installation: Slides over the pipe and sits flush against the wall surface Technical Specification Brand: McAlpine SKUs: WALLFLANGE-CP32 (32mm Euro) | WALLFLANGE-CP35 (1¼" / 35mm) | WALLFLANGE-CP42 (1½" / 42mm) Material: Chrome plated brass Type: Wall flange / pipe cover plate / escutcheon Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Pipe and Fittings Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Select the size to match your waste pipe diameter. 32mm Euro and 1¼" (35mm) are standard for basin and bidet waste pipes. 1½" (42mm) is used for bath and shower waste. If in doubt, measure the outside diameter of your waste pipe. What is the difference between 32mm Euro and 1¼"?32mm is the European metric standard; 1¼" (approx. 35mm) is the traditional UK imperial size. These are not interchangeable — check your pipe before ordering. Can I use this with plastic waste pipe?Yes — the wall flange simply slides over the pipe regardless of material (chrome brass or plastic), as long as you select the correct diameter. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside the McAlpine Chrome Brass Wall Flange: McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine Straight Connector — Chrome Brass x ABS Solvent Weld Also explore our full range of small plumbing fittings and accessories.
£7.10 - £9.10
-
McAlpine Chrome Pipe Clip for Plastic Waste Pipe | 32mm, 1¼" & 1½" | Sold Per Clip
The McAlpine Chrome Pipe Clip secures plastic waste pipe to a wall or surface with a sleek chrome finish that matches McAlpine’s CP Brass trap range. Ideal for use alongside chrome waste fittings where a consistent, premium appearance is required throughout the installation. Available in 32mm Euro, 1¼" and 1½" to suit the most common waste pipe diameters. Sold individually — per clip. Key Features Chrome finish: Matches McAlpine CP Brass trap compression nuts for a coordinated look For plastic waste pipe: Designed to clip and secure standard plastic waste pipe to wall or surface Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Sold per clip: Order the exact quantity you need Part of the McAlpine CP Chrome Plated Brass Waste range Simple screw-fix installation Technical Specification Brand: McAlpine SKUs: S32-CP (32mm Euro) | S35-CP (1¼" / 35mm) | T42-CP (1½" / 42mm) Material: Chrome plated plastic Type: Pipe clip / pipe bracket Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) Sold: Individually (per clip) For use with: Plastic waste pipe; complements McAlpine CP Chrome Plated Brass Waste range Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?Select the size to match your waste pipe diameter. 32mm Euro and 1¼" (35mm) are standard for basin and bidet waste pipes. 1½" (42mm) is used for bath and shower waste. Measure the outside diameter of your pipe if unsure. How many clips do I need?As a general guide, pipe clips should be fitted every 400–500mm on horizontal runs to prevent sagging, and at closer intervals on vertical runs. Order the quantity you need — each clip is sold separately. Will this work with chrome brass pipe as well as plastic?These clips are designed for plastic waste pipe. For securing chrome brass waste pipe, a different clip type may be required — contact us if you need advice. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Waste Pipe Installation Frequently bought alongside McAlpine Chrome Pipe Clips: McAlpine Chrome Plated Brass Wall Flange — 32mm, 1¼" & 1½" McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB Also explore our full range of small plumbing fittings and accessories.
£2.99 £2.40
-
McAlpine Chrome Plated Brass Waste Pipe | 1m Length | 32mm Euro, 1¼" & 1½"
McAlpine Chrome Plated Brass Waste Pipe supplied in 1 metre lengths, available in three standard sizes to suit UK and European waste pipe installations. With a sleek chrome finish that matches the rest of the McAlpine CP Brass range, this pipe is ideal for under-sink, basin, and vanity unit waste runs where a premium, coordinated appearance is required. Key Features 1 metre length: Standard length for most under-sink waste runs, cut to size as required Chrome plated brass: Premium finish matching McAlpine CP Brass trap compression nuts and fittings Three sizes available: 32mm Euro, 1¼" (35mm) and 1½" (42mm) — select above Part of the McAlpine CP Chrome Plated Brass Waste range: Compatible with all McAlpine CP brass compression fittings, bends, tees and connectors Can be cut to length: Standard pipe cutter or hacksaw can be used to cut to the required length Technical Specification Brand: McAlpine SKUs: PIPE32-1000-CB (32mm Euro) | PIPE35-1000-CB (1¼" / 35mm) | PIPE42-1000-CB (1½" / 42mm) Length: 1000mm (1 metre) Material: Chrome plated brass Available sizes: 32mm Euro | 1¼" (35mm) | 1½" (42mm) For use with: McAlpine CP Chrome Plated Brass Waste Fittings (compression bends, straight connectors, tees, wall flanges) Country of Origin: United Kingdom Frequently Asked Questions Which size do I need?32mm Euro is the metric European standard for basin waste pipe. 1¼" (35mm) is the traditional UK imperial standard for basin and bidet wastes. 1½" (42mm) is used for bath and shower waste. Match to your existing trap outlet or fittings. What is the difference between 32mm Euro and 1¼"?32mm is the European metric standard; 1¼" (approx. 35mm) is the UK imperial equivalent. These are not interchangeable — check your existing fittings carefully before ordering. Can this pipe be cut to a shorter length?Yes — chrome brass waste pipe can be cut with a standard pipe cutter or fine-tooth hacksaw. Deburr the cut end before fitting to ensure a watertight compression joint. When will my order be dispatched?This item is ordered in specially for you. Please allow approximately 4 working days for dispatch. Can I order if the item shows as out of stock?Yes — this item is ordered in to fulfil your order and will typically be dispatched within 4–5 working days. Complete Your Chrome Waste Pipe Installation Pair your chrome waste pipe with the rest of the McAlpine CP Brass range: McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine 135° Chrome Brass Compression Bend — 35B-CB / 42B-CB McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine Chrome Plated Brass Compression Tee — 42E-CB McAlpine Chrome Brass Wall Flange — 32mm, 1¼" & 1½" McAlpine Chrome Pipe Clips — 32mm, 1¼" & 1½" Also explore our full range of plumbing fittings and accessories.
£49.99 - £65.99
-
McAlpine Chrome Plated Brass Adjustable Bottle Trap | CA32MINI-CB | 32mm Euro | 50mm Seal | With Pipe & Wall Flange
The McAlpine CA32MINI-CB is a chrome plated brass adjustable inlet cylindrical bottle trap with a 50mm water seal and 32mm European outlet. Supplied as a complete kit including a 12" (300mm) length of 32mm OD chrome plated brass waste pipe and a chrome wall flange — everything you need for a neat, fully chrome waste run from basin to wall. Also supplied with the MS4-32SOLVENT fitting to convert to 1¼" UK pipe size where required. Conforms to BS EN 274-1:2002. Key Features 50mm water seal: Meets current UK building regulations for water seal depth Adjustable inlet: Allows the trap inlet to be positioned at different heights to suit various basin waste outlet positions 32mm European outlet: Standard metric outlet for connection to European waste pipe systems Cylindrical bottle trap design: Compact form factor — ideal for pedestal basins and wall-hung basins with limited under-sink space Complete kit: Includes 12" (300mm) chrome plated brass waste pipe and chrome wall flange UK size adaptor included: MS4-32SOLVENT fitting converts outlet to 1¼" UK pipe size Chrome plated brass construction: Corrosion-resistant, premium finish that complements McAlpine CP Brass waste fittings Conforms to BS EN 274-1:2002: Meets current British Standard for waste fittings Technical Specification Brand: McAlpine SKU: CA32MINI-CB Type: Cylindrical bottle trap (adjustable inlet) Material: Chrome plated brass Water seal: 50mm Outlet size: 32mm European Included: Bottle trap, 12" (300mm) x 32mm OD chrome brass waste pipe, chrome wall flange, MS4-32SOLVENT UK size adaptor Standard: BS EN 274-1:2002 Country of Origin: United Kingdom Frequently Asked Questions What is included in the kit?The CA32MINI-CB is supplied with the chrome bottle trap, a 12" (300mm) length of 32mm OD chrome plated brass waste pipe, a chrome wall flange, and the MS4-32SOLVENT fitting for converting to 1¼" UK pipe size. What does ‘adjustable inlet’ mean?The trap inlet can be adjusted up or down to align with the waste outlet on your basin — useful where the basin waste outlet height doesn’t align perfectly with a fixed trap position. Does this meet building regulations?Yes — the 50mm water seal meets current UK building regulations requirements, and the trap conforms to BS EN 274-1:2002. Can I connect this to UK 1¼" waste pipe instead of 32mm Euro pipe?Yes — the MS4-32SOLVENT fitting is included to convert the 32mm European outlet to 1¼" UK pipe size. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Complete Your Chrome Waste Installation Frequently bought alongside the McAlpine CA32MINI-CB Chrome Bottle Trap: McAlpine 90° Chrome Brass Compression Bend — 32A-CB / 35A-CB / 42A-CB McAlpine Chrome Brass Compression Straight Connector — 32G-CB / 35G-CB / 42G-CB McAlpine Chrome Plated Brass Waste Pipe — 1m Length | 32mm, 1¼" & 1½" McAlpine Chrome Brass Wall Flange — 32mm, 1¼" & 1½" Also explore our full range of plumbing fittings and accessories.
£58.85 £47.99
-
McAlpine SolvPro Solvent Cement with Dauber Applicator | WRAS Approved | UV Detectable | Low VOC
The McAlpine SolvPro Solvent Cement is a medium-bodied, fast-setting solvent cement designed for making secure, watertight joints on solvent-weld plastic pipework. WRAS approved for use in contact with potable water, UV detectable for coverage verification, and formulated with low VOC for improved safety in confined spaces. Available in 118ml (SVPR-2) and 237ml (SVPR-1) with an integrated dauber applicator, plus a dedicated Can Key Opener (SVPR-C-K) for easy opening. Key Features WRAS Approved: Safe for use on potable water pipework UV Detectable: Glows under UV light so you can verify coverage before the joint sets Low VOC: Reduced volatile organic compounds for safer use in enclosed or poorly ventilated spaces Medium bodied / fast setting: Ideal for a wide range of plastic pipe diameters and quick turnaround installations Dauber applicator included: Built-in dauber ensures controlled, even application Fully recyclable aluminium can: Environmentally responsible packaging Two sizes available: 118ml (SVPR-2) for smaller jobs, 237ml (SVPR-1) for larger or trade use Can Key Opener (SVPR-C-K): Stainless steel opener with serrated inner edge for grip and flat edge for paint-style cans — ensures airtight resealing to protect contents Technical Specification Brand: McAlpine SKUs: SVPR-2 (118ml) | SVPR-1 (237ml) | SVPR-C-K (Can Opener) Type: Medium bodied solvent cement Setting speed: Fast setting VOC content: Low VOC Approval: WRAS approved UV detection: Yes — glows under UV light Applicator: Integrated dauber Can material: Fully recyclable aluminium Can Opener material: Stainless steel For use with: Solvent-weld plastic pipework Country of Origin: United Kingdom Frequently Asked Questions Which size should I choose?The 118ml (SVPR-2) is ideal for domestic repairs and small jobs. The 237ml (SVPR-1) is better suited to larger installations or trade use where multiple joints are being made. What is the Can Key Opener (SVPR-C-K) for?The SVPR-C-K is a stainless steel tool designed specifically for opening McAlpine SolvPro cans. The serrated inner edge grips the cap ridges, and the flat edge opens paint-style cans. It also ensures the cap is resealed with enough force to keep the contents airtight and prevent the solvent from drying out. Is this cement safe for drinking water pipework?Yes — SolvPro is WRAS approved, confirming it is safe for use on pipework carrying potable (drinking) water. How does UV detection work?The cement contains a UV-reactive additive that glows when a UV light is shone on it, allowing you to check that coverage is complete before the joint sets. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your Pipework Installation Frequently bought alongside McAlpine SolvPro Solvent Cement: McAlpine Supereasy Close Coupling Kit — CC-KIT / CC-KIT2 McAlpine Supereasy Throughbolt Cistern Kit — TB-KIT Also explore our full range of small plumbing fittings and accessories.
£5.50 - £7.50
-
McAlpine Supereasy Throughbolt Cistern Kit | TB-KIT | Stainless Steel | Easy Fit
The McAlpine Supereasy Throughbolt Cistern Kit (TB-KIT) provides a secure, reliable connection between your toilet cistern and pan using McAlpine’s patented Supereasy design — the same trusted engineering found across the Supereasy range. Manufactured in stainless steel and supplied complete with everything you need, this is the straightforward solution for connecting a standard back-to-wall or close-coupled cistern to the pan. Key Features Patented Supereasy design: Engineered for fast, frustration-free installation Stainless steel construction: Corrosion-resistant bolts, nuts and washers for a long-lasting, watertight connection Complete kit: Supplied with all nuts, bolts and washers — nothing extra to buy For use with standard pans and cisterns: Compatible with a wide range of toilet models Secure cistern-to-pan connection: Eliminates the risk of leaks and movement Easy DIY installation: No specialist tools required British-engineered: McAlpine quality, manufactured to UK standards Technical Specification Brand: McAlpine SKU: TB-KIT Material: Stainless Steel Includes: Throughbolts, nuts and washers For use with: Standard toilet pans and cisterns Connection type: Throughbolt Country of Origin: United Kingdom Warranty: McAlpine standard manufacturer guarantee Frequently Asked Questions What is the difference between a throughbolt kit and a close coupling kit?A throughbolt kit connects the cistern to the pan by passing bolts through both components from above — typically used on back-to-wall and some close-coupled designs. A close coupling kit (CC-KIT) uses a side-entry bolt arrangement specific to close-coupled cisterns. If you’re unsure which you need, check your cistern fixing holes or contact us for advice. Is everything included to complete the fitting?Yes — the TB-KIT includes all throughbolts, nuts and washers. No additional fixings are required. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. When will my order be dispatched?As this item is ordered in to fulfil your order, please allow 5–7 working days for dispatch. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your WC Installation Frequently bought alongside the McAlpine Supereasy Throughbolt Cistern Kit: McAlpine Supereasy Close Coupling Kit — 1½" or 2" | CC-KIT / CC-KIT2 McAlpine F33R Straight Flexible WC Pan Connector — 850mm, 97–107mm Inlet Also explore our full range of small plumbing fittings and accessories.
£9.99
-
McAlpine Supereasy Close Coupling Kit | 1½" or 2" | Stainless Steel | Easy Fit
Tired of wrestling with awkward wing nuts in a tight space? The McAlpine Supereasy Close Coupling Kit solves one of plumbing’s most frustrating jobs with two British-patented innovations that make fitting a close-coupled cistern genuinely straightforward. Available in 1½" and 2" to suit most standard close-coupled WC pans and cisterns. Key Features Patented tapered bolt: No thread on the tip means the nut locates instantly — no more fumbling blind behind the cistern Patented stainless steel fixing plate: Retaining flap holds the bolt in place during fitting so it can’t fall or rotate Stainless steel construction: Corrosion-resistant and built to last Two sizes available: 1½" (CC-KIT) and 2" (CC-KIT2) — select your size above Complete kit supplied: Includes metal backplate, bolts, nuts, and washers — everything you need Screwed connection: Secure, watertight join between pan and cistern Easy DIY installation: No specialist tools required British-made, British-patented: McAlpine engineering designed and manufactured in the UK Technical Specification Brand: McAlpine SKU: CC-KIT (1½") | CC-KIT2 (2") Available Sizes: 1½" and 2" Connection Type: Screwed Material: Stainless Steel Includes: Stainless steel backplate with retaining flap, patented tapered bolts, nuts, washers For use with: Close-coupled WC pans and cisterns Country of Origin: United Kingdom Warranty: McAlpine standard manufacturer guarantee Frequently Asked Questions Which size do I need — 1½" or 2"?Most modern close-coupled cisterns use 1½" (38mm) fittings. The 2" (50mm) size is used on older or larger cisterns. Check your existing kit or cistern specifications if unsure — or contact us and we can advise. What makes this easier than a standard close coupling kit?Standard kits use fully threaded bolts and loose wing nuts that are almost impossible to locate and tighten when working blind behind a cistern. McAlpine’s patented tapered bolt and retaining backplate mean the nut locates immediately and the bolt stays put — no dropped parts, no frustration. Is everything included to complete the fitting?Yes — the kit includes the stainless steel backplate, patented bolts, nuts, and washers. No additional parts are needed. Can I order if the item shows as out of stock?Yes — this item is ordered in specially for you and will typically be dispatched within 5–7 working days. When will my order be dispatched?As this item is ordered in to fulfil your order, please allow 5–7 working days for dispatch. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete Your WC Installation Frequently bought alongside the McAlpine Supereasy Close Coupling Kit: McAlpine Supereasy Throughbolt Cistern Kit — Patented Easy-Fit Design McAlpine F33R Straight Flexible WC Pan Connector — 850mm, 97–107mm Inlet Also explore our full range of small plumbing fittings and accessories.
£11.40 - £14.50
-
McAlpine HC2650UK Top Access Bath Waste & Trap | 50mm Seal | Chrome, Black, Brass or White | 4 Finishes
The McAlpine HC2650UK is the shallowest combined top access bath trap and waste assembly on the market — with an overall height of just 112mm including the trap and waste. Featuring a 50mm water seal, a swivelling outlet for easy installation, and a spring-loaded mushroom plug for top-access cleaning, it’s the go-to solution for low-clearance bath installations. Available in four finishes to match your bathroom hardware. Key Features Ultra-Low Profile: 112mm overall height — the shallowest top access combined bath trap & waste available Top Access Cleaning: Spring-loaded mushroom plug lifts out for easy hair and debris removal without removing the trap Swivel Outlet: 1½” outlet rotates 360° for flexible positioning during installation 50mm Water Seal: Provides effective odour barrier in compliance with building regulations Universal Multifit Compression Outlet: Suits all plastic, copper, and lead waste pipes Adjustable Overflow Tube: Flexible length adjusts from 330mm to 580mm to suit your bath Four Finishes: Chrome, Matt Black, Brushed Brass, or White — to match your bathroom taps and hardware Conforms to BS EN 274-1:2002: Meets the relevant UK/EU standard for sanitary appliance fittings Technical Specification SKU / MPN: HC2650UK (Chrome) | HC2650UK-WH (White) | HC2650UK-MB (Matt Black) | HC2650UK-BB (Brushed Brass) Brand: McAlpine Water Seal: 50mm Outlet Size: 1½” Universal Compression (Multifit) Outlet Type: Swivel — suits all plastic, copper, and lead pipe Overall Height (incl. trap & waste): 112mm Overflow Tube Length: Adjustable 330mm – 580mm Plug Type: Spring-loaded mushroom plug (top access) Finishes: Chrome Plated Brass | Matt Black | Brushed Brass | White Standard: BS EN 274-1:2002 Country of Origin: United Kingdom Multifit Connections Explained McAlpine Multifit connections suit all plastic waste pipes to BS EN 1451-1:2000 and BS EN 1329-1:2000, copper pipe (metric or imperial), and lead pipe. The moulded internal sleeve centres and supports the pipe, while the Multifit and friction washers create a secure seal. Tighten hand-tight for the best mechanical joint. If a plastic pipe is undersize or out of round, warming the end gently will help it seat over the sleeve. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Frequently Asked Questions Why is the HC2650UK described as the shallowest on the market?The combined overall height of the trap and waste assembly is just 112mm — making it ideal for baths where floor-to-underside clearance is severely restricted, such as freestanding baths on low feet or built-in baths with deep frames. What pipe sizes does the outlet fit?The 1½” Multifit compression outlet suits all standard plastic, copper (metric and imperial), and lead waste pipes without adaptors. My bath has a thick reinforced base — will this fit?If your bath has a thicker than standard baseboard or reinforced frame, you may need the HC2650UK Extension Kit, which lowers the outlet position to accommodate the extra depth. Can the overflow tube length be adjusted?Yes — the flexible overflow tube adjusts from 330mm to 580mm, making it compatible with a wide range of bath overflow heights. Does it require a plumber to install?The HC2650UK is designed for straightforward installation, but if you’re not confident with plumbing work we recommend using a qualified plumber, particularly in a bathroom environment. Can I order if the item shows as out of stock?Yes — contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 and we’ll confirm availability and lead time. Also in the McAlpine HC2650UK Range McAlpine HC2650UK Extension Kit — lowers outlet for reinforced or thick-base baths McAlpine HC2650UK Spares Kit — replacement plug, dome & dip-tube Other McAlpine Bath Traps McAlpine Q10 19mm Shallow Seal Bath Trap — Chrome Multifit Outlet
£26.00 - £43.00
You have seen 48 out of 277 products
