Stop your toilet seat moving, rocking, or coming loose with genuine Euroshowers Toilet Seat Fixing Kits & Fittings. Available in six variants covering top-fix sets, bottom-fix sets, anti-slip cones, and replacement bolts — there's a solution for every seat type and fixing method.
Which Fixing Kit Do You Need?
SP1 — Nylon Top Fix Set: Standard nylon top-fix fitting kit for seats with top-fix hinges | Barcode 5029067005013
SP2 — Rubber Top Fix Set: Rubber top-fix fitting kit — provides additional grip and vibration dampening | Barcode 5029067005020
SP4 — Bottom Fix Anti-Slip Cones: Anti-slip cone inserts for bottom-fix seats to prevent movement and rocking | Barcode 5029067005044
SP12 — Bottom Fix Bolt Set with Anti-Slip Cones: Complete bottom-fix bolt set including anti-slip cones for a secure, stable fit | Barcode 5029067005129
SP13 — 100mm Bolts: Longer replacement bolts for bottom-fix seats with deeper pan access | Barcode 5029067005136
SP14 — 45mm Bolts: Standard replacement bolts for bottom-fix seats | Barcode 5029067005143
Technical Specification
SKUs: SP1, SP2, SP4, SP12, SP13, SP14
Compatible With: Euroshowers toilet seats and most standard toilet seats
Material: Nylon / Rubber / Stainless steel (dependent on variant)
Country of Origin: China
Brand: Euroshowers
Frequently Asked Questions
My toilet seat keeps moving — which kit do I need?
If your seat has top-fix hinges, try the SP1 Nylon Top Fix Set or SP2 Rubber Top Fix Set. If your seat is bottom-fixed and rocking, the SP4 Anti-Slip Cones or SP12 Bottom Fix Bolt Set with Anti-Slip Cones are the most likely solution. If you're unsure, contact us at customerservice@bubblegumbathrooms.co.uk and we'll help identify the right part.
What is the difference between SP13 (100mm) and SP14 (45mm) bolts?
The bolt length determines how far the fixing reaches through the pan. SP14 (45mm) is the standard length for most pans. SP13 (100mm) is a longer bolt for pans with deeper access holes or thicker ceramic. Check the depth of your pan's fixing holes before ordering.
Will these fixings work with non-Euroshowers seats?
Yes — these are genuine Euroshowers parts but are compatible with most standard toilet seats. If you're unsure whether a specific kit will suit your seat, contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
Are these genuine Euroshowers parts?
Yes — these are genuine Euroshowers replacement fixings, designed to work with Euroshowers seats and most standard toilet seats.
Looking for SP30 Top Fix Bolts?
The SP30 Top Fix Bolts are available as a separate listing here.
Can I order if the item shows as out of stock?
Yes — you can still place an order even if the item shows as out of stock. Parts will be ordered to your requirements and typically take around 2 extra days to dispatch. For any queries, contact us at customerservice@bubblegumbathrooms.co.uk.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Related Euroshowers Spare Parts
Euroshowers Replacement Hinges for MDF & Wood Toilet Seats — SP5 bar hinge & SP7 individual, chrome
Euroshowers Wider Teardrop Hinge Pack — SP21 — replacement hinges for compatible round seats
Euroshowers Replacement Hinge Cover Plates — white & black, SP22 & SP23
Euroshowers SP30 Top Fix Bolts — toilet seat replacement fixing bolts
Browse all Euroshowers Toilet Seats | Browse All Toilet Seats
Kartell Spring Loaded Bottom Shower Wheel – 23mm | Genuine Replacement Part
Restore smooth, effortless sliding to your Kartell shower door with this genuine Kartell replacement bottom shower wheel. Featuring a spring-loaded mechanism and precision 304 stainless steel micro-bearing, this later-model wheel delivers consistent, reliable performance. Available individually or in money-saving sets of 2 or 4.
⚠️ Compatibility note: This is the later version with a rounded top edge. Earlier versions had a square top edge and are not compatible. Please check the dimensions below and compare with your existing wheel before ordering. If unsure, send us a photo and we’ll confirm fitment.
Key Features
Genuine Kartell replacement part — designed for Kartell sliding doors and quadrant enclosures (later models)
Spring-loaded mechanism — ensures consistent, smooth door operation
304 stainless steel micro-bearing — precision engineered for smooth, long-lasting glide
Brass pivot — corrosion-resistant, rust-free in wet environments
Chrome finish
Available as single, set of 2, or set of 4
Technical Specification
Wheel Diameter (A): 23mm
Wheel Thickness (B): 6mm
Glass Hole Diameter (C): 11.3mm
Glass Thickness (D): 4–6mm
Centre to Edge Distance (E): 19mm
Glass to Wheel Distance (F): 19mm
Wheel Body: High-grade plastic
Bearing: 304 stainless steel micro-bearing
Pivot: Brass
Finish: Chrome
Mechanism: Spring-loaded
Brand: Kartell
SKU: SWSP-1 (single) / SWSP x2 (pair) / SWSP x4 (set of 4)
Frequently Asked Questions
How do I know if this wheel fits my shower?
This wheel fits Kartell sliding shower doors and quadrant enclosures — later models only (rounded top edge). Compare the dimensions above with your existing wheel. If you’re unsure, send us a photo of your current wheel to customerservice@bubblegumbathrooms.co.uk and we’ll confirm compatibility.
How many wheels do I need?
Most sliding shower doors use 2 bottom wheels (one per door panel). If you have a quadrant with two sliding panels, you may need 4. We recommend checking your existing setup before ordering — our set of 2 and set of 4 options offer a saving over buying individually.
Is this a genuine Kartell part?
Yes — this is a genuine Kartell replacement spare part, designed specifically for Kartell sliding shower enclosures.
Can I order if the item shows as out of stock?
Yes — we can still accept your order even if the item shows as out of stock. We will fulfil it as soon as stock becomes available. If you have any questions about lead times, please contact us at customerservice@bubblegumbathrooms.co.uk.
Do you need help choosing?
Our team is happy to help. Get in touch at customerservice@bubblegumbathrooms.co.uk and we’ll advise on the best option for your shower.
Create a clean, contemporary basin area with the Roper Rhodes Crew tall basin mixer in chrome. Its elevated profile suits compatible countertop and vessel basin installations, while the single lever keeps flow and temperature adjustment together. The 295mm overall height gives the tap a balanced presence beside a raised bowl.
A ceramic disc cartridge provides smooth operation, and the mixer works from a minimum pressure of 0.2 bar. Before choosing, check the outlet height and spout reach against your basin's rim and bowl position. Overall height alone does not establish the clearance above your basin.
Key Features
Tall basin mixer for compatible countertop and vessel basins.
Chrome finish to coordinate with the Crew range.
295mm overall height and 52mm width.
Single-lever adjustment of water flow and temperature.
Ceramic disc cartridge.
Minimum operating pressure of 0.2 bar.
Single-hole, deck-mounted installation.
10-year manufacturer guarantee.
Technical Specification
Brand: Roper Rhodes
Range: Crew
Product code: TR1084
EAN: 5016519504385
Product type: Tall basin monobloc mixer tap
Finish: Chrome
Mounting: Deck mounted
Tap holes required: One
Operation: Single lever
Cartridge: Ceramic disc
Overall height: 295mm
Width: 52mm
Minimum operating pressure: 0.2 bar
Basin waste: Not included
Country of origin: China
Guarantee: 10 years
What's Included
Roper Rhodes Crew tall basin mixer tap in chrome.
A compatible basin waste is required separately.
Frequently Asked Questions
Will this tap fit my countertop basin?
The tall design is intended for above-counter installations, subject to dimensional compatibility. Compare the outlet height and reach with your basin's rim height and bowl position. Allow room to operate the handle and position the water stream inside the bowl.
Is 295mm the spout outlet height?
No. The listed 295mm measurement is the overall tap height. Check the technical dimensions for outlet height and spout reach before confirming basin clearance.
What water pressure does it need?
The minimum operating pressure is 0.2 bar. Ask your installer to confirm that the supply at the tap meets its operating requirements. Suitability depends on the installation rather than simply whether your home uses gravity-fed, combi boiler or mains-pressure water.
Is a basin waste included?
No. Select a separate basin waste to suit your basin's waste opening and overflow arrangement. Check whether the bowl requires a slotted or unslotted waste before purchasing.
Is there a shorter Crew mixer?
Yes. See the Crew standard basin mixer or Crew mini basin mixer and compare their dimensions with your basin.
What guarantee is included?
The Crew tall basin mixer carries a 10-year Roper Rhodes manufacturer guarantee, subject to the manufacturer's terms.
Can I order if the item shows as out of stock?
Yes. This tap can be ordered when out of stock, with fulfilment subject to availability. For a current lead time or a specific delivery date, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Complete the Crew Collection
Crew Standard Basin Mixer with Click Waste.
Crew Mini Basin Mixer with Click Waste.
Crew Bath Filler Tap.
Crew Bath Shower Mixer Tap.
Crew Concealed Two Outlet Thermostatic Shower.
A compact but essential fitting — the Euroshowers SP16 Universal Shower Hose Retainer clips onto your shower rail to hold the hose at a fixed height, preventing the shower head from dropping into the bath or shower tray. Compatible with 18mm, 22mm, and 25mm diameter rails, it suits the vast majority of standard UK shower installations. Simple clip-on fitting, no tools required.
⚠️ UK Building Regulations — Shower Hose Retention: Under the Water Supply (Water Fittings) Regulations 1999 (WRAS), shower installations must incorporate backflow prevention measures. A hose retainer that keeps the shower head above the flood level of the bath or tray is a recognised, low-cost way to meet this fluid category 3 requirement and keep your installation compliant.
Key Features
Universal fit — compatible with 18mm, 22mm, and 25mm diameter shower rails
Holds shower hose at a fixed position on the rail
Meets UK Building Regulations / WRAS backflow prevention requirements
Clip-on installation — no tools required
Compact and discreet design
WRAS approved
Technical Specification
Compatible Rail Diameters: 18mm, 22mm, 25mm
SKU: SP16
Barcode: 5029067005167
Brand: Euroshowers
Country of Origin: China
HS Code: 392690
Complete Your Shower Installation
Euroshowers Smiple 11 High-Flow Shower Hose (WRAS Approved)
Euroshowers SuperLux® Hi-Flow Shower Hose | 50–200cm | WRAS Approved
Euroshowers Quick Shower Slide Rail | 750mm | No Drill
Euroshowers SilverSpray Shower Slide Rail Set | 740mm
Euroshowers EasySpray Shower Slide Rail Set | 600mm
Browse All Euroshowers Products
Frequently Asked Questions
Is a shower hose retainer required by law?
Under the Water Supply (Water Fittings) Regulations 1999, shower installations must include backflow prevention. A hose retainer that keeps the shower head above the flood level of the bath or tray is a recognised way to meet this requirement. We recommend consulting a qualified plumber or your local water authority if you are unsure about your specific installation.
What rail sizes does this fit?
This retainer is compatible with 18mm, 22mm, and 25mm diameter shower rails — the most common sizes used in UK bathrooms.
How is it fitted?
The retainer clips directly onto the shower rail. No tools are required.
Can I order if the item shows as out of stock?
Yes — you can still place an order and we will fulfil it as soon as stock is available. If you need a more precise lead time, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
Do you have any questions?
Contact our team at customerservice@bubblegumbathrooms.co.uk and we'll be happy to help.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Make the most of every inch of your shower with the Euroshowers Chrome Wire Corner Basket — a smart, space-saving caddy designed to fit neatly into the corner of any shower enclosure. Crafted from stainless steel with a polished chrome finish, it's built to resist rust and corrosion in wet environments. Choose from Single, Double, or Triple configurations to suit your storage needs.
Key Features
Corner-fit design maximises shower space without protruding into the enclosure
Stainless steel construction — rust-resistant and durable
Polished chrome finish to complement any bathroom scheme
Open wire design allows water to drain freely
Available in Single, Double, and Triple basket configurations
Wall-mounted for a permanent, tidy installation
Technical Specification
Material: Stainless steel
Finish: Chrome
Single Basket (SKU: 57700): 27 x 10 x 20cm | Barcode: 5029067577008 | £15.99
Double Basket (SKU: 57500): 27 x 30 x 20cm | Barcode: 5029067575004 | £25.99
Triple Basket (SKU: 57600): 27 x 50 x 20cm | Barcode: 5029067576001 | £31.99
Brand: Euroshowers
Complete the Euroshowers Collection
All Euroshowers Bathroom Accessories
All Shower Caddies & Baskets
Euroshowers Chrome Rectangle Wire Shower Basket
Euroshowers Shower Squeegee & Scraper
Frequently Asked Questions
How is the basket fixed to the wall?
These baskets are designed for wall mounting. Please refer to the product images for fixing details, or contact us before ordering if you need further guidance.
Will the chrome finish rust in a wet shower?
The baskets are made from stainless steel with a chrome finish, making them highly resistant to rust and corrosion under normal shower conditions.
Which size should I choose?
The Single basket is ideal for a compact shower or en-suite. The Double suits couples sharing a shower, and the Triple provides maximum storage for a family bathroom.
Can I order if the item shows as out of stock?
Yes — you can still place an order and we will fulfil it as soon as stock is available. If you need a more precise lead time, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
Do you have any questions?
Contact our team at customerservice@bubblegumbathrooms.co.uk and we'll be happy to help.
Keep your toilet seat firmly in place with the Euroshowers SP30 Top Fix Bolts — genuine replacement fixing bolts for top-fix toilet seat installations. Whether your original bolts have worn, snapped, or gone missing, the SP30 provides a like-for-like replacement to restore a secure, rattle-free fit. The finned collar locates in the pan hole to eliminate sideways movement, and the drop-through metal plate clamps the fitting from above — no under-pan access required.
Key Features
Genuine Euroshowers replacement top fix bolts — SKU SP30
Finned collar — sits in the pan hole to eliminate sideways movement and keep the seat aligned
Drop-through metal plate — clamps to pan from above, no under-pan access or expansion bolt needed
Compatible with Euroshowers seats and most standard top-fix toilet seats
Simple installation — no specialist tools required in most cases
Technical Specification
SKU / MPN: SP30
Barcode: 5029067005174
Fixing Type: Top Fix
Collar Type: Finned — locates in pan hole to prevent sideways movement
Clamping Method: Drop-through metal plate — no under-pan access or expansion bolt required
Compatible With: Euroshowers toilet seats and most standard top-fix seats
Country of Origin: China
Brand: Euroshowers
Frequently Asked Questions
What is the SP30 top fix bolt used for?
The SP30 is a replacement bolt for top-fix toilet seat installations. If your seat's top-fix bolts have worn or broken, the SP30 restores a secure fixing without needing to replace the entire seat.
How does the SP30 prevent the seat from moving sideways?
The SP30 features a finned collar that sits in the pan hole, preventing sideways movement and keeping the seat properly aligned.
Do I need access under the pan to fit the SP30?
No — the SP30 uses a drop-through metal plate that clamps the fitting to the pan from above. No access to the underside of the pan is needed, and it does not rely on an expansion bolt.
Will the SP30 fit my toilet seat?
The SP30 is designed for Euroshowers seats and is compatible with most standard top-fix toilet seats. If you're unsure, contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
Do I need the SP1 or SP2 kit instead?
If you need a complete top-fix fitting set, the SP1 Nylon Top Fix Set or SP2 Rubber Top Fix Set may be more appropriate.
Can I order if the item shows as out of stock?
Yes — you can still place an order even if the item shows as out of stock. Parts will be ordered to your requirements and typically take around 2 extra days to dispatch. For any queries, contact us at customerservice@bubblegumbathrooms.co.uk.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Related Euroshowers Spare Parts
Euroshowers Toilet Seat Fixing Kits & Fittings — SP1 nylon top fix, SP2 rubber top fix, SP4 anti-slip cones, SP12, SP13 & SP14 bolts
Euroshowers Replacement Hinges for MDF & Wood Seats — SP5 bar hinge & SP7 individual hinges
Euroshowers Wider Teardrop Hinge Pack — SP21 — replacement hinges for compatible round seats
Euroshowers SP8 Replacement Fixings & Pins — top & bottom fix
Euroshowers SP18 Replacement Fixings & Pins — top & bottom fix
Euroshowers Replacement Hinge Cover Plates — white & black, SP22 & SP23
Browse All Euroshowers Toilet Seats | Browse All Toilet Seats
Restore your Euroshowers toilet seat to full working order with the Euroshowers SP19 Replacement Fixings & Pins Pack. This genuine replacement pack contains all the parts required to install your compatible seat as either top fix or bottom fix — giving you full flexibility at installation.
⚠️ Check Compatibility Before Ordering: Not all hinge fittings are the same — please check your seat SKU against the compatible models listed below before ordering. If you are unsure, contact us at customerservice@bubblegumbathrooms.co.uk with your seat model or SKU.
Key Features
Genuine Euroshowers Replacement Part — matches original specification
Complete Pack — all parts for top fix or bottom fix installation included
Wide Compatibility — fits a range of Euroshowers duroplast and polypropylene seats
Easy to Fit — no specialist tools required
Extends the Life of Your Existing Seat — no need to replace the whole unit
Technical Specification
Brand: Euroshowers
SKU / MPN: SP19 | Barcode: 5029067005198
Type: Replacement Fixings & Pins
Fixing Type: Top Fix & Bottom Fix (all parts included)
Country of Origin: China
Condition: New
Compatible Euroshowers Toilet Seats
This pack is compatible with the following Euroshowers seats and their colour variants:
Rainbow Soft Close D-Shape Seat — SKU 87310 + colour variants
Rainbow Soft Close Universal Seat — SKU 84331 + colour variants
Rainbow D-One Soft Close Seat — SKU 86510 + colour variants
Family Toilet Seat with Built-In Child Seat (D-Shape) — SKU 83080 + colour variants
Family Toilet Seat with Built-In Child Seat (445mm) — SKU 83090 + colour variants
V20 Square D-Shape Soft Close Seat — SKU 87372 + colour variants
Round Soft Close Seat — SKU 87360 + colour variants
D-Shape Soft Close Seat (Polypropylene) — SKU 87390, 87380, 87384
Related Euroshowers Spare Parts & Fittings
Euroshowers Toilet Seat Fixing Kits — SP1 Nylon Top Fix, SP2 Rubber Top Fix, SP4 Anti-Slip Cones, SP12 Bottom Fix Bolt Set, SP13 & SP14 Bolts
Euroshowers Replacement Hinges for MDF & Wood Seats — SP5 Bar Hinge & SP7 Individual Hinges
Euroshowers Wider Teardrop Hinge Pack (SP21) — Replacement Hinges for Compatible Round Seats
Euroshowers SP8 Replacement Fixings & Pins — Top & Bottom Fix
Euroshowers SP17 Replacement Fixings & Pins — Top & Bottom Fix
Euroshowers SP18 Replacement Fixings & Pins — Top & Bottom Fix
Euroshowers Replacement Hinge Cover Plates — White & Black | SP22 & SP23
Complete Your Bathroom
Browse All Euroshowers Toilet Seats
Browse All Toilet Seats — view all styles, shapes & materials
Frequently Asked Questions
How do I know if SP19 is the right fixing pack for my seat?
Check your seat's SKU (printed on the underside of the seat or on the original packaging) against the compatible models listed above. If your SKU is not listed or you are unsure, contact us at customerservice@bubblegumbathrooms.co.uk and we'll confirm compatibility for you.
Does this pack include everything I need?
Yes — the SP19 pack contains all the parts required to install your seat as either top fix or bottom fix. No additional fixings are needed.
Is this a genuine Euroshowers part?
Yes — this is a genuine Euroshowers replacement fixing pack, designed to match the original specification of compatible seats.
Can I order if the item shows as out of stock?
Yes — if stock shows as zero, the item is ordered in specially for you and will typically be dispatched within 4 working days. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 if you have any questions.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
⚠️ Clearance Stock — Customer Returns (3 Left): These lights have been fitted and returned by customers stating "wrong colour". Units show signs of installation and boxes are worn/crushed. All lights were tested on return and will be retested on the day of dispatch. If you would like pictures of the actual items, please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095. While stocks last.
Bring clean, contemporary illumination to your bathroom with the JCC LED3 Fire Rated Downlight in brushed nickel. Engineered for safety and efficiency, this IP65-rated fitting is fully approved for bathroom Zone 1 installations — delivering crisp 4000K cool white light through a precision 38° beam, all from just 4.9W. The slim brushed nickel bezel adds a refined, understated finish that complements both modern and transitional bathroom schemes.
Key Features
🔥 Fire rated — LED3 fire rating for ceiling integrity compliance
💧 IP65 rated — suitable for bathroom Zone 1 (above the bath/shower)
💡 4000K cool white — crisp, clean light ideal for bathroom tasks
🎯 38° beam angle — focused, glare-controlled illumination
⚡ Energy efficient — just 4.9W power consumption
🔩 Spring clip fixing — quick, tool-free installation
🛡️ Class I earthed — enhanced electrical safety
Non-dimmable
Technical Specification
Model
JC94199BN
Finish
Brushed Nickel
Colour Temperature
4000K Cool White
Beam Angle
38°
Power
4.9W
Input Voltage
220–240V AC, 50Hz
Output Supply
9–10.5V CC
Running Current
320mA ±5%
IP Rating
IP65
Dimmable
No
Electrical Class
Class I (Earthed)
EMC Compliance
EN55015
Luminaire Weight
0.3kg (inc. driver)
Minimum Void
75mm
Cut-Out (30min ceiling)
Ø 71–73mm (12.5mm thick)
Cut-Out (60–90min ceiling)
Ø 80mm (30mm thick)
Fixing Method
Spring clip (included)
Country of Origin
United Kingdom
Barcode (EAN)
5052544033407
SKU
AC47037
Frequently Asked Questions
Is this fitting suitable for use directly above a shower or bath?
Yes. The IP65 rating makes this downlight suitable for bathroom Zone 1 — directly above the bath or shower enclosure — as well as Zone 2 and general bathroom areas.
What size hole do I need to cut?
For standard 12.5mm plasterboard (30-minute fire-rated ceilings), cut a Ø 71–73mm hole. For 30mm thick ceilings (60–90 minute fire rating), cut Ø 80mm. Minimum ceiling void required is 75mm.
Is this downlight dimmable?
No — this fitting is non-dimmable. Please ensure your circuit does not use a dimmer switch.
Does it require an earth connection?
Yes. This is a Class I fitting and must be connected to an earth (ground) wire. It should be installed by a qualified electrician.
What is the condition of these clearance lights?
These are customer returns. The lights were returned stating "wrong colour" and show signs of installation. Boxes are worn/crushed. All units were tested on return and will be retested on the day of dispatch. If you would like pictures of the actual items before purchasing, please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095.
Bring your cistern button into line with your bathroom finishes with the Roper Rhodes 40mm Universal Flush Button Upgrade. Choose Brushed Bronze, Brushed Brass, Brushed Nickel, Gunmetal or Black to coordinate with your taps and accessories while retaining a compatible existing cistern mechanism.This is a mechanical, rod-operated push button with adjustable rods. The 40mm size is a nominal product designation, not a confirmed drilling dimension. Despite the universal name, it is not suitable for every WC: check your cistern, valve, mounting opening and rod alignment before ordering.Key Features
Five finish options: Brushed Bronze, Brushed Brass, Brushed Nickel, Gunmetal and Black.
Adjustable rods: allow the button to be set to suit a compatible cistern and valve arrangement.
Mechanical operation: a rod-operated replacement, not a pneumatic, cable-operated or electronic control.
Coordinated appearance: update the visible button to complement your bathroom fittings.
Separate 40mm nominal version: an alternative to the 48mm model linked below.
Technical Specification
Brand: Roper Rhodes
Product type: rod operated close coupled cistern flush button
Nominal size: 40mm
Required mounting opening: verify for the selected part and existing cistern; 40mm is not a drilling specification
Operation: mechanical push button with adjustable rods
Brushed Bronze code: TR9051
Brushed Brass code: TR9038
Brushed Nickel code: TR9055
Gunmetal code: TR9047
Black code: TR9026
Compatibility & InstallationThe existing product information lists Roper Rhodes Debut, Dana and Orbit, plus Tavistock Orbit, Structure, Ion, Lansdown and Levant. Treat these as a starting point for checking suitability, not a guarantee for every version: replacement valves and different cistern configurations can affect fit.Before purchase, ask your installer to check the lid opening, lid thickness, internal clearance, rod reach and alignment with the actual valve. A matching opening alone does not establish compatibility. Do not drill or enlarge a ceramic lid using the nominal 40mm designation as a template.Follow the attached installation guide when assembling and adjusting the button. Set the rods so they do not hold the valve down when released, and test operation with the cistern lid in its final position. Retain access for maintenance. Do not apply the separate 48mm model's adjustment dimensions to this button.Frequently Asked QuestionsDoes 40mm mean the exact hole size?No exact mounting-hole dimension has been confirmed for this listing. The 40mm designation is nominal. Check the selected part's fitting requirements before ordering or modifying a lid.Will it fit my close-coupled cistern?Suitability depends on the cistern model, valve, lid opening, clearance and rod alignment. Check the actual mechanism fitted, even if your WC range is listed above. For help identifying the right part, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Which finish should I select?Choose Brushed Bronze (TR9051), Brushed Brass (TR9038), Brushed Nickel (TR9055), Gunmetal (TR9047) or Black (TR9026). Compare the finish with your existing fittings before ordering.Are the rods adjustable?Yes. Their adjustment must suit your actual valve-to-lid arrangement. Check the required reach rather than assuming the dimensions of another button apply.Can this replace a pneumatic, cable or sensor button?This is a mechanical rod-operated button, not a direct replacement for those operating systems. Check the valve mechanism as well as the visible button size.Will a new button change the flush volume?Flush volume depends on the cistern and valve settings, not the button finish or nominal size.Is there a larger alternative?Yes. The separately listed 48mm upgrade is an alternative for compatible cisterns, not another component required with this button. Check that model's own fitting requirements before choosing.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your InstallationCompare the Roper Rhodes 48mm Universal Flush Button Upgrade. This separate model has its own mounting and adjustment requirements; it is not an additional part needed with the 40mm button.Browse All Toilet Seats — view all styles, shapes & materials.
Refresh your Burlington bath shower mixer with a replacement handset that coordinates with your bathroom fittings. Choose Chrome, Gold or Brushed Nickel to keep the look consistent, whether you are replacing a worn handset or finishing a bathroom refresh. This listing is for the handset only; a shower hose is not included.
Key Features
Three finish options: choose Chrome, Gold or Brushed Nickel to complement your fittings.
½" BSP connection: connects to a hose with a matching fitting; check your existing connection before ordering.
Burlington replacement handset: for compatible Burlington bath shower mixer installations.
Replace just the part you need: retain a suitable existing hose rather than buying a complete shower assembly.
Technical Specification
Brand: Burlington
Product type: replacement shower handset
Finishes: Chrome, Gold or Brushed Nickel
Chrome product code: V29
Gold product code: V29GOLD
Brushed Nickel product code: V29BNKL
Connection: ½" BSP
Compatibility: compatible Burlington bath shower mixer setups; check the mixer model and hose fitting
Supplied: handset only; hose not included
Before You Order
Match the selected finish and product code to the part you need. A matching hose thread alone does not confirm suitability for every mixer or shower system. If you are unsure, email customerservice@bubblegumbathrooms.co.uk with your mixer model and a photograph of the existing fitting, or call 01603 381095.
Frequently Asked Questions
Will this fit my Burlington bath shower mixer?
This handset is intended for compatible Burlington bath shower mixer setups and has a ½" BSP connection. Check your mixer model and hose fitting before ordering, or contact us for help identifying the correct replacement.
Which finish and product code should I choose?
Select Chrome for V29, Gold for V29GOLD or Brushed Nickel for V29BNKL. Choose the finish that matches your existing fittings; finish names on other ranges do not necessarily indicate an exact colour match.
Is a shower hose included?
No. This listing supplies the replacement handset only. You can retain a compatible existing hose or browse our shower hoses, checking the connection before purchasing.
Can I order if the item shows as out of stock?
Yes. All three finishes can be ordered when out of stock. For a current availability estimate, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095, particularly if you are working to an installation date.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Complete the Burlington Collection
Explore more Burlington replacement fittings for your bathroom. Check each product's finish and compatibility separately before ordering.
Burlington replacement cistern levers
Burlington A51 toilet seat handles
Bring your in-wall toothbrush charger into line with the rest of your bathroom. This ProofVision TBCharge replacement faceplate swaps the standard white finish for brushed brass, brushed steel, matt black or polished steel, giving your taps and fittings a more coordinated look. This listing is for the faceplate only, not the charger.
Key Features
Replacement faceplate for compatible ProofVision TBCharge in-wall chargers
Four finishes to coordinate with bathroom brassware and accessories
Designed for the PV11P dual charger and PV12P single charger with shaver socket
Not listed for PV10P single charger without shaver socket
Technical Specification
Brand: ProofVision
Product type: Replacement toothbrush charger faceplate
Compatible charger models: PV11P (Dual), PV12P (Single With Shaver Socket)
Not compatible: PV10P (Single without shaver socket) Contact us!
Brushed Brass SKU: PV11-BB-FR
Brushed Steel SKU: PV11-BS-FR
Matt Black SKU: PV11-MB-FR
Polished Steel SKU: PV11-PS-FR
Included: Replacement faceplate only; charger and toothbrushes not included
Frequently Asked Questions
Which charger does this fit?It is listed for the ProofVision TBCharge dual charger (PV11P) and the single charger with shaver socket (PV12P). Check the model on your unit before ordering.
Will it fit a PV10P single charger?No. This faceplate is not listed for the PV10P single charger without a shaver socket.
Is a charger included?No. This is a replacement faceplate only. Choose your preferred finish above.
Can I order if it shows as out of stock?Availability depends on the selected finish. If it cannot be ordered, contact customerservice@bubblegumbathrooms.co.uk for an update.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Complete the ProofVision Range
ProofVision TBCharge Single In-Wall Charger — choose the shaver-socket version for PV12P
ProofVision TBCharge Dual In-Wall Toothbrush Charger — PV11P version
Free up space around the basin with a ProofVision in-wall toothbrush charger for compatible Philips Sonicare brushes. The flush-mounted design keeps loose charging cables off the countertop, while the included white faceplate gives the bathroom a clean, minimal finish. Choose a Single, Single With Shaver or Double configuration to suit your routine.Key Features
Built-in charging: In-wall installation for a tidier bathroom counter.
Choice of three configurations: Single, Single With Shaver socket, or Double for two toothbrushes.
White faceplate included: Coordinate the charger with a simple white finish.
Philips Sonicare compatibility: Listed for the 1000–7000 Series; check your exact brush model before ordering.
Compatibility
Listed compatible: Philips Sonicare 1000, 2000, 3000, 4000, 5000, 6000 and 7000 Series.
Not listed as compatible: Philips Sonicare 9000 Series, DiamondClean, DiamondClean Smart or DiamondClean Prestige.
Technical Specification
Brand: ProofVision
Product type: In-wall electric toothbrush charger
Single SKU: PVPS10P, charges one toothbrush
Single With Shaver SKU: PVPS12P, charges one toothbrush and includes a shaver socket
Double SKU: PVPS11P, charges two toothbrushes
Faceplate: White included
Installation: In-wall, by a qualified electrician
Country of origin: China
HS code: 850980
What's in the Box
ProofVision in-wall toothbrush charger in your selected configuration
White faceplate
Installation instructions
Frequently Asked QuestionsWill it fit my Philips Sonicare toothbrush?It is listed for the Sonicare 1000–7000 Series, but not for the 9000 Series or DiamondClean models. Check your exact model before ordering.What's the difference between the configurations?Single (PVPS10P) charges one brush; Single With Shaver (PVPS12P) charges one brush and adds a shaver socket; Double (PVPS11P) charges two brushes.Can I change the faceplate finish?A replacement faceplate is available for compatible Double and Single With Shaver configurations. Check fit before buying; it is not listed for the Single configuration.How long does it take?These units are ordered in as required rather than held in local stock. Please allow 4–5 working days.Does it need professional installation?Yes. In-wall electrical installation should be carried out by a qualified electrician in accordance with applicable electrical regulations.Can I order if it shows as out of stock?Yes. This product can be ordered when stock shows as zero. For current timing, contact customerservice@bubblegumbathrooms.co.uk.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the ProofVision Range
ProofVision Replacement Faceplates — check model fit
ProofVision TBCharge Dual In-Wall Toothbrush Charger — Oral-B iO or Philips Sonicare options
ProofVision TBCharge Single In-Wall Toothbrush Charger — Oral-B iO
⚠️ Currently Unavailable. This product is temporarily out of stock. Why not take a look at the Euroshowers TurboJet Shower Handset (SKU 50910) or our new Euroshowers Self-Clean Anti-Limescale Shower Head (SKU 71010) as alternatives.
The Mira Nectar Eco Shower Handset delivers a genuinely satisfying shower while using up to 85% less water than a standard handset. With four spray modes, an integrated 6L/min flow regulator, and WRAS approval, it's a smart upgrade for any mixer shower — easy to fit, no tools required.
4 Spray Modes Including Economy Setting
Switch between four versatile spray patterns to suit your preference, including a dedicated economy mode for everyday water saving. The 90mm diameter head provides broad, even coverage across all settings.
Integrated Flow Regulator
The built-in 6-litre-per-minute flow regulator limits water consumption without sacrificing shower quality — saving up to 85% more water compared to standard handsets. An ideal choice for eco-conscious households and properties looking to reduce utility bills.
Rub-Clean Nozzles
Silicone rub-clean nozzles make limescale removal effortless — simply wipe the spray plate to restore full flow, keeping maintenance quick and tool-free.
WRAS & KIWA Approved
Approved by both WRAS (Water Regulations Advisory Scheme) and KIWA UK, confirming compliance with UK water quality and safety standards.
Key Features
4 spray modes including economy setting
Integrated 6L/min flow regulator
Saves up to 85% water vs standard handsets
90mm diameter head
Rub-clean silicone nozzles
Standard ½" BSP connection
No tools required for installation
WRAS and KIWA UK approved
Chrome finish
Specifications
Diameter: 90mm
Connection: ½" BSP
Flow rate: 6L/min
Finish: Chrome
Brand: Mira
SKU: 2.1831.004
Barcode: 5013181064100
Professional installation recommended. Compatible with all standard mixer showers.
The McAlpine HC2650UK Spares Kit contains the key replacement components for the McAlpine HC2650UK Top Access Bath Waste & Trap. Whether you need to replace a worn plug, dome, or dip-tube, this kit has everything required to restore full function to your trap — without replacing the entire unit.
What’s Included
Spring-Loaded Mushroom Plug: Drop-in replacement for the pop-up waste plug mechanism
70mm Stainless Steel Dome: Corrosion-resistant dome cover for a clean, durable finish
2-Piece Adjustable Dip-Tube: Replacement dip-tube assembly for correct trap seal depth
Key Features
Genuine McAlpine Parts: Designed and manufactured specifically for the HC2650UK trap
Stainless Steel Dome: 70mm diameter — corrosion-resistant and easy to clean
Adjustable Dip-Tube: 2-piece design allows depth adjustment to suit your bath installation
Easy to Install: No specialist tools required
McAlpine Quality: Backed by McAlpine’s reputation for reliability and professional-grade performance
Technical Specification
Brand: McAlpine
Compatible With: McAlpine HC2650UK Top Access Bath Waste & Trap only
Dome Diameter: 70mm
Dome Material: Stainless Steel
Plug Type: Spring-loaded mushroom plug
Dip-Tube: 2-piece adjustable
Country of Origin: United Kingdom
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Frequently Asked Questions
Which trap is this spares kit for?This kit is designed exclusively for the McAlpine HC2650UK Top Access Bath Waste & Trap. It is not compatible with other McAlpine trap models.
What does the kit include?The kit comprises a spring-loaded mushroom plug, a 70mm stainless steel dome, and a 2-piece adjustable dip-tube.
Do I need a plumber to fit these parts?The parts are straightforward to install. However, if you are unsure about any aspect of the work we recommend using a qualified plumber.
Can I order if the item shows as out of stock?Yes — contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 and we’ll confirm availability and lead time.
Also in the McAlpine HC2650UK Range
McAlpine HC2650UK Top Access Bath Waste & Trap — the main trap unit
McAlpine HC2650UK Extension Kit — lowers trap outlet for reinforced bath bases
Add a bold splash of colour to your bathroom with the Euroshowers Rainbow Soft Close Toilet Seat. Crafted from premium duroplast — the material of choice for high-end toilet seats — this D-shape seat combines a whisper-quiet soft-close mechanism with a smooth, hygienic finish that resists scratches, stains, and household chemicals. Available in five striking colours: White, Grey, Black, Blue, and Red.
⚠️ Important — Please Check Dimensions Before Ordering: Full dimensions and a technical drawing are provided in the product images above. As a hygiene product, this item is non-returnable once the packaging has been opened — please ensure this seat fits your WC pan before purchasing. If you're unsure, contact us at customerservice@bubblegumbathrooms.co.uk before ordering. Your statutory rights are not affected.
Key Features
5 Colour Options — White, Grey, Black, Blue & Red
Soft-Close Hinge — whisper-quiet, no slamming lids
D-Shape Profile — contemporary, modern look
Premium Duroplast Construction — scratch, stain, and chemical resistant
Top-Fix Fitting — quick, tool-free installation
Suitable for Most Standard D-Shape WC Pans
Technical Specification
Brand: Euroshowers
SKU / MPN: 87310 (White) | 87311 (Grey) | 87312 (Black) | 87314 (Blue) | 87315 (Red)
Shape: D-Shape
Material: Duroplast (DP)
Hinge Type: Soft Close
Overall Length: 464mm
Overall Width: 365mm
Fixing Type: Top Fix
Colours: White, Grey, Black, Blue, Red
Country of Origin: China
Condition: New
Frequently Asked Questions
What colours is this toilet seat available in?
The Rainbow seat is available in five colours: White, Grey, Black, Blue, and Red. Select your preferred colour before adding to basket.
What shape is this toilet seat?
This is a D-shape toilet seat, suitable for most modern D-shape WC pans. If you're unsure of your pan shape, measure the seat opening — D-shape pans have a flat edge at the back.
What is duroplast and why is it better?
Duroplast is a high-density thermosetting plastic that is harder, heavier, and more resistant to scratches, stains, and household chemicals than standard thermoplastic (polypropylene) seats. It is the material of choice for premium toilet seats and will maintain its finish for longer.
Is this seat easy to install?
Yes — the Rainbow seat uses a standard top-fix fitting system. No specialist tools required; full fitting instructions are included.
Can I order if the item shows as out of stock?
Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. For urgent enquiries, contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095.
Explore More Euroshowers Toilet Seats
Euroshowers Round Soft Close Toilet Seat — 5 Colours | Duroplast | 420mm
Euroshowers Rainbow D-One Soft Close Toilet Seat — 5 Colours | Duroplast | D-Shape
Euroshowers Middle D Style Soft Close Toilet Seat — White | Duroplast
Euroshowers Long D Soft Close Toilet Seat — White Duroplast | 466mm
Euroshowers Short D Soft Close Toilet Seat — White Duroplast
Euroshowers Slimlux Slim Soft Close Toilet Seat — White Duroplast | Standard Shape
Browse All Euroshowers Toilet Seats
Browse All Toilet Seats — view all styles, shapes & materials
The Euroshowers MDF Soft Close D-Shape Quick Release Toilet Seat combines heavy-weight MDF quality with the convenience of a whisper-quiet soft-close mechanism and a quick-release hinge system for effortless removal and cleaning. Fitted with robust metal soft-close bar hinges and available in four finishes — White, Oak, Walnut Red, and Mahogany — this is a premium everyday seat built to last. Both top-fix and bottom-fix fittings are supplied as standard.
⚠️ Important — Please Check Dimensions Before Ordering: Full dimensions and a technical drawing are provided in the product images above. As a hygiene product, this item is non-returnable once the packaging has been opened — please ensure this seat fits your WC pan before purchasing. If you're unsure, contact us at customerservice@bubblegumbathrooms.co.uk before ordering. Your statutory rights are not affected.
Key Features
Soft-close metal bar hinges — whisper-quiet, no slamming
Quick-release hinge system — seat lifts off in seconds for thorough cleaning
Heavy-weight MDF construction — substantial, premium feel
D-shape profile to suit most modern D-shape WC pans
4 finishes: White, Oak, Walnut Red & Mahogany
Both top-fix and bottom-fix fittings supplied
Easy to clean and maintain
Finishes Available
MDF White — SKU 82793 | Barcode 5029067827936
MDF Oak — SKU 82792 | Barcode 5029067827929
MDF Walnut Red — SKU 82791 | Barcode 5029067827912
MDF Mahogany (Dark Red) — SKU 82790 | Barcode 5029067827905
Technical Specification
Model: MDF Soft Close D-Shape Quick Release
Shape: D-Shape
Material: MDF
Hinge Type: Soft Close metal bar hinge with quick release
Fixing Type: Top Fix & Bottom Fix (both supplied)
Country of Origin: China
Brand: Euroshowers
Frequently Asked Questions
What is a quick-release toilet seat?
A quick-release seat can be lifted off its hinges in seconds without tools, making it much easier to clean around and behind the seat and the top of the pan. Simply press the release buttons on the hinges and lift the seat away.
How does the soft-close mechanism work?
The metal bar hinges contain a damping mechanism that slows the seat and lid as they close, preventing them from slamming. This protects both the seat and the pan, and reduces noise.
Is this a real wood toilet seat?
No — this seat is made from MDF with a wood-effect or white finish. MDF is more resistant to bathroom humidity than solid wood, making it a practical and attractive alternative.
Will this seat fit my toilet?
This is a D-shape seat suitable for most standard D-shape WC pans. Please refer to the technical drawing in the product images for exact dimensions, and check your pan measurements before ordering. If in doubt, contact us at customerservice@bubblegumbathrooms.co.uk.
Can I order if the item shows as out of stock?
Yes — you can still place an order even if the item shows as out of stock. The seat will be ordered to your requirements and typically takes around 2 extra days to dispatch. For any queries, contact us at customerservice@bubblegumbathrooms.co.uk.
Do you have more Euroshowers MDF toilet seats?
Yes — browse the full Euroshowers collection for the complete MDF and duroplast range.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Complete the Euroshowers MDF Range
Euroshowers MDF Value Toilet Seat — white, entry-level MDF, plastic hinge, bottom fix
Euroshowers MDF Soft Close Toilet Seat — standard shape, 4 finishes, adjustable soft close
Euroshowers MDF Wood Effect Toilet Seat — 10 wood-effect finishes, chrome metal bar hinges
Euroshowers MDF Antibacterial Toilet Seat — lacquered, chrome hinges, top & bottom fix
Euroshowers Rainbow D-One Soft Close Toilet Seat — D-shape in multiple colours, duroplast
Browse All Toilet Seats — view all styles, shapes & materials
Bring a coordinated finishing touch to your concealed cistern installation with the Tavistock Round Pneumatic Dual Flush Button. Its 75mm round face offers a neat, understated alternative to a larger flush plate, with Black, Brushed Brass, Gunmetal, Brushed Nickel and Brushed Bronze options to complement your bathroom fittings.Pneumatic operation uses air pressure to activate a compatible cistern, without wiring or batteries for the button. Separate reduced and full flush controls let you select the flush provided by your cistern's setup.Key Features
Round profile: listed 75mm-wide × 75mm-high face.
Five finish options: Black, Brushed Brass, Gunmetal, Brushed Nickel and Brushed Bronze.
Pneumatic actuation: operates through air tubing connected to a compatible cistern.
Dual flush control: selects the cistern's reduced or full flush.
No electrical supply: no wiring or batteries required for button operation.
Technical Specification
Brand: Tavistock / Roper Rhodes
Product type: round pneumatic dual flush button
Listed face dimensions: 75mm wide × 75mm high
Operation: pneumatic
Flush control: dual flush
Black SKU: TR9022
Brushed Brass SKU: TR9034
Gunmetal SKU: TR9045
Brushed Nickel SKU: TR9054
Brushed Bronze SKU: TR9050
Application: compatible Tavistock and Roper Rhodes pneumatic concealed cisterns
Installation & CompatibilityConfirm your exact cistern model, pneumatic connections and mounting requirements before ordering. This is not a universal replacement for every dual-flush cistern, mechanical button, cable-operated control or electronic actuator.Check the required mounting opening, panel thickness, rear clearance and air-tube arrangement against the manufacturer's fitting instructions. The 75mm face measurement is not a drilling or cut-out dimension. Retain suitable access to the cistern for future maintenance, particularly when replacing a service-access flush plate with a button.Frequently Asked QuestionsWhich product code matches each finish?Black is TR9022, Brushed Brass is TR9034, Gunmetal is TR9045, Brushed Nickel is TR9054 and Brushed Bronze is TR9050. TR9022 identifies the Black option, not the whole range.Will it fit my concealed cistern?It is intended for compatible Tavistock and Roper Rhodes pneumatic concealed cisterns. Confirm the exact model, air connections and mounting arrangement before purchase. If you need help, email your cistern model and photographs to customerservice@bubblegumbathrooms.co.uk.Does the button need batteries or wiring?No. It operates pneumatically using air pressure through its connection to a compatible cistern.Is 75mm the hole size?No. This is the listed face size. Follow the fitting instructions for the required opening and clearance before drilling or modifying a panel.Does the button set the flush volumes?No. It selects the reduced or full flush; the water volumes depend on the connected cistern and its adjustment.Is there a chrome option?Chrome is available on the separate SP12169 listing linked below. Check that part's own compatibility and fitting requirements before ordering.What if my preferred finish is unavailable?Contact us for current supplier availability and a lead-time estimate on 01603 381095 or customerservice@bubblegumbathrooms.co.uk.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Tavistock Flush Button CollectionCompare these alternative finishes and face shapes, checking each product's compatibility before choosing:
Tavistock SP12169 75mm Round Pneumatic Dual Flush Button in Chrome
Tavistock Square Pneumatic Dual Flush Button
Tavistock Oval Pneumatic Dual Flush Button
Get the seal right first time. This professional-grade waterproof sealant is engineered specifically for Fibo wall panels — ensuring a complete moisture barrier at every joint, edge, and corner. Using genuine Fibo Sealant is a requirement for maintaining your Fibo panel warranty, making it an essential companion to any Fibo installation. Available in Black, Grey (400591), and White (400590) to match your panel colour scheme.
Key Features
Fibo warranty compliance — genuine Fibo Sealant is required to keep your panel warranty valid
Complete waterproof protection — creates a reliable moisture barrier at joints, edges, and corners
Generous coverage — one 290ml tube covers up to 3 panel packs
Three colour options — Black, Grey (400591), and White (400590) for a seamless finish
Standard cartridge format — fits all sealant guns for easy, mess-free application
Formulated for wet areas — designed specifically for bathrooms and wet rooms
Technical Specification
Brand: Fibo
Type: Waterproof bathroom panel sealant
Volume: 290ml cartridge
Colour options: Black / Grey (400591) / White (400590)
Coverage: Up to 3 Fibo panel packs per tube
Application: Fibo wall panels, bathroom joints, wet room edges
Format: Standard cartridge (fits all sealant guns)
Country of Origin: Norway (NO)
HS Code: 3214.10
SKU (Black): DIWW0394
SKU (Grey 400591): DIWW0396
SKU (White 400590): DIWW0398
Barcode (Black): 5054913550904
Barcode (Grey): 5054913550911
Barcode (White): 5054913550928
What's Included
1 × 290ml Fibo waterproof sealant cartridge (colour as selected)
Requires a standard sealant gun for application.
Complete the Fibo Collection
Fibo Bathroom Wall Panels & Accessories — browse the full Fibo bathroom range
Fibo Kitchen Wall Panels & Splashbacks — Fibo kitchen range
All Fibo Products — wall boards, splashbacks & accessories
Fibo Small L-Shaped Profile 2.4m — wall panel trim in Black or Aluminium
Fibo 2-Part Internal Corner Profile 2.4m — internal corner trim
Fibo Internal Corner Profile 2.4m — Aluminium, Polished Chrome or White PVC
Fibo Rounded External Corner Profile 2.4m — external corner trim
Fibo Base Profile 2.4m — waterproof wall panel base trim
Fibo J-Shaped End Cap Profile 2.4m — wall panel edge trim
Fibo Internal Hidden Corner Profile 2360mm — seamless aluminium trim
Frequently Asked Questions
Is this sealant required for the Fibo warranty?
Yes — using genuine Fibo Sealant is a requirement for maintaining your Fibo panel warranty. Using alternative sealants may void the warranty.
How much sealant do I need?
One 290ml tube covers up to 3 Fibo panel packs. Calculate based on the number of panel packs in your installation and order accordingly.
Which colour should I choose?
Select the colour that most closely matches your Fibo panel finish: Black, Grey (400591), or White (400590). The colour codes correspond to Fibo's own colour references.
Do I need a sealant gun?
Yes — a standard sealant gun is required to apply the sealant from the 290ml cartridge.
Can I order if the item shows as out of stock?
Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us on 01603 381095 to confirm availability.
Give a traditional Burlington toilet seat a coordinated finishing touch. The A51 handles come as a matched pair, one for the seat cover and one for the seat ring, making each easier to lift while complementing your bathroom fittings. Choose Chrome, Brushed Nickel or Brushed Brass. The toilet seat is sold separately.Key Features
Matched pair: One handle for the seat cover and one for the seat ring.
Three finishes: Chrome, Brushed Nickel or Brushed Brass.
Traditional styling: Coordinate with a Burlington bathroom scheme.
Listed seat models: Burlington S11, S12 and S13; check your seat model before ordering.
Technical Specification
Brand: Burlington
Model: A51
Product type: Toilet seat handle pair
Supplied: Two handles, for seat cover and ring; seat not included
Listed compatible seats: Burlington S11, S12, S13
Chrome SKU: A51CHR
Brushed Nickel SKU: A51BNKL
Brushed Brass SKU: A51GOLD
Frequently Asked QuestionsHow many handles are included?A pair: one for the seat cover and one for the seat ring.Which seats do they fit?They are listed for Burlington S11, S12 and S13 traditional seats. If you are unsure of your model, contact customerservice@bubblegumbathrooms.co.uk before ordering.Is the toilet seat included?No. This listing is for the A51 handle pair only; the seats are available separately below.Can I order if the finish shows as out of stock?Availability depends on the selected finish. If ordering is unavailable, contact us for an update before placing your order.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Burlington Collection
Burlington S13 Gloss White Traditional Toilet Seat
Burlington S11 Golden Oak Traditional Toilet Seat
Burlington S12 Mahogany Traditional Toilet Seat
Browse All Toilet Seats — view all styles, shapes & materials
Create a coordinated finish around your bathroom wall panels with Nuance BB Complete Colour-Matched Sealant. The 290ml cartridge is available in ten colours, helping joints blend with your chosen panel finish rather than stand out in contrasting white or clear. Suitable for the Nuance, Wetwall, Bushboard and Wilsonart panel ranges identified in this listing, it is a practical finishing product for your bathroom installation.Key Features
Colour-coordinated finish: Ten options to complement your wall panels.
Panel installation accessory: For sealing joints as directed by the relevant panel installation guidance.
290ml cartridge: For use with a compatible cartridge sealant gun.
Coordinated installation: Pair with BB Complete panel adhesive where specified for your panel system.
Available ColoursAsh Grey, Chocolate, Fudge, Ice White, Jet Black, Mushroom, Pewter Grey, Silver Grey, Slate Grey and Vanilla.Technical Specification
Brand: Nuance
Range: BB Complete
Product type: Colour-matched wall panel sealant
Cartridge volume: 290ml
Colour options: 10
Associated panel ranges: Nuance, Wetwall, Bushboard and Wilsonart
Application: Bathroom wall panel joints, subject to the panel manufacturer's installation instructions
Frequently Asked QuestionsWhich colour should I choose?Use the recommended sealant colour for your particular panel decor. A colour name alone does not guarantee an exact match. If you need help, email customerservice@bubblegumbathrooms.co.uk with your panel brand and finish before ordering.Can I use it with Nuance, Wetwall, Bushboard or Wilsonart panels?This BB Complete sealant is listed for these panel ranges. Check the installation instructions for your specific panel system to confirm the required sealant and colour.How much sealant do I need?The quantity depends on the length, width and depth of the joints and the requirements of your panel installation. Follow the panel manufacturer's guidance rather than assuming one cartridge will cover a complete enclosure.Is this a substitute for panel adhesive?Choose the product specified for each installation step. Where BB Complete panel adhesive is required for fixing panels, use the dedicated adhesive rather than substituting this sealant.Can I order if the item shows as out of stock?Yes, orders are accepted when stock is unavailable. Contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to confirm availability and lead time.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Nuance Collection
Nuance BB Complete Panel Adhesive 290ml
Nuance Wall Panel Set A3, corner up to 1200mm × 1200mm
Nuance Wall Panel Set B3, corner up to 1200mm × 1800mm
Nuance Wall Panel Set D3, recess up to 1200mm × 1200mm × 1200mm
Nuance Designer White Single Niche
Keep your Euroshowers toilet seat looking its best with these Euroshowers Replacement Hinge Cover Plates. Available in white (SP22) or black (SP23), these genuine cover caps fit all compatible Euroshowers seats fitted with the January 2026 hinge upgrade.
⚠️ Check Compatibility Before Ordering: These cover plates are designed for Euroshowers seats fitted with the January 2026 hinge upgrade. Please check your seat SKU against the compatible models listed below. If you are unsure, contact us at customerservice@bubblegumbathrooms.co.uk with your seat model or SKU.
Key Features
Available in White (SP22) and Black (SP23)
Genuine Euroshowers replacement part — matches original specification
Fits all compatible seats with January 2026 hinge upgrade (see list below)
Restores the finished appearance of your toilet seat hinges
Easy to fit — no specialist tools required
Technical Specification
SKU / MPN: SP22 (White) | SP23 (Black)
Barcodes: SP22 White — 5029067000179 | SP23 Black — 5029067000162
Type: Hinge Cover Plates
Colours: White (SP22), Black (SP23)
Country of Origin: China
Brand: Euroshowers
Compatible Euroshowers Toilet Seats
These cover plates fit the following Euroshowers seats (all units fitted with the January 2026 hinge upgrade) and their colour variants:
Euroshowers Rainbow Soft Close Toilet Seat — D-Shape | SKU 87310 + colour variants
Euroshowers Rainbow D-One Soft Close Toilet Seat — D-Shape | SKU 86510 + colour variants
Euroshowers D-Shape Soft Close Toilet Seat — Polypropylene | SKU 87390, 87380, 87384
Euroshowers Round Soft Close Toilet Seat — Duroplast | SKU 87360 + colour variants
Browse all compatible Euroshowers Toilet Seats
Frequently Asked Questions
How do I know if these cover plates fit my seat?
These plates are designed for Euroshowers seats fitted with the January 2026 hinge upgrade. Check your seat's SKU against the compatible models listed above. If you are unsure, contact us at customerservice@bubblegumbathrooms.co.uk with your seat model or SKU.
Which colour should I choose?
Choose White (SP22) if your seat is white, or Black (SP23) if your seat is black. For coloured seats, white cover plates are generally the better match — contact us at customerservice@bubblegumbathrooms.co.uk if you are unsure.
Is this a genuine Euroshowers part?
Yes — these are genuine Euroshowers replacement parts, designed to match the original specification of compatible seats.
Can I order if the item shows as out of stock?
Yes — you can still place an order even if the item shows as out of stock. Parts will be ordered to your requirements and typically take around 2 extra days to dispatch. For any queries, contact us at customerservice@bubblegumbathrooms.co.uk.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Related Euroshowers Spare Parts & Fittings
Euroshowers Toilet Seat Fixing Kits & Fittings — SP1 nylon top fix, SP2 rubber top fix, SP4 anti-slip cones, SP12, SP13 & SP14 bolts
Euroshowers Replacement Hinges for MDF & Wood Seats — SP5 bar hinge & SP7 individual hinges
Euroshowers Wider Teardrop Hinge Pack — SP21 — replacement hinges for compatible round seats
Euroshowers SP8 Replacement Fixings & Pins — top & bottom fix
Euroshowers SP17 Replacement Fixings & Pins — top & bottom fix
Euroshowers SP18 Replacement Fixings & Pins — top & bottom fix
Euroshowers SP19 Replacement Fixings & Pins — top & bottom fix
Browse All Euroshowers Toilet Seats | Browse All Toilet Seats
Restore your Euroshowers toilet seat to full working order with the Euroshowers SP17 Replacement Fixings & Pins Pack. This genuine replacement pack contains all the parts required to install your compatible seat as either top fix or bottom fix — giving you full flexibility at installation.
⚠️ Check Compatibility Before Ordering: Not all hinge fittings are the same — please check your seat SKU against the compatible models listed below before ordering. If you are unsure, contact us at customerservice@bubblegumbathrooms.co.uk with your seat model or SKU.
Key Features
Genuine Euroshowers Replacement Part — matches original specification
Complete Pack — all parts for top fix or bottom fix installation included
Wide Compatibility — fits a range of Euroshowers duroplast seats
Easy to Fit — no specialist tools required
Extends the Life of Your Existing Seat — no need to replace the whole unit
Technical Specification
Brand: Euroshowers
SKU / MPN: SP17 | Barcode: 5029067005174
Type: Replacement Fixings & Pins
Fixing Type: Top Fix & Bottom Fix (all parts included)
Country of Origin: China
Condition: New
Compatible Euroshowers Toilet Seats
This pack is compatible with the following Euroshowers seats and their colour variants:
Short D Soft Close Seat — SKU 88210 + colour variants
Opal One Universal Soft Close Seat — SKU 83311 + colour variants
Ettan Soft Close Seat — SKU 83510 + colour variants
Slimlux Slim Soft Close Seat — SKU 87910 + colour variants
Smiley Square Soft Close Seat — SKU 83040 + colour variants
Crealine Soft Close Seat (Fits RAK Mistral & Venice) — SKU 83050 + colour variants
Related Euroshowers Spare Parts & Fittings
Euroshowers Toilet Seat Fixing Kits — SP1 Nylon Top Fix, SP2 Rubber Top Fix, SP4 Anti-Slip Cones, SP12 Bottom Fix Bolt Set, SP13 & SP14 Bolts
Euroshowers Replacement Hinges for MDF & Wood Seats — SP5 Bar Hinge & SP7 Individual Hinges
Euroshowers Wider Teardrop Hinge Pack (SP21) — Replacement Hinges for Compatible Round Seats
Euroshowers SP8 Replacement Fixings & Pins — Top & Bottom Fix
Euroshowers SP18 Replacement Fixings & Pins — Top & Bottom Fix
Euroshowers SP19 Replacement Fixings & Pins — Top & Bottom Fix
Euroshowers Replacement Hinge Cover Plates — White & Black | SP22 & SP23
Complete Your Bathroom
Browse All Euroshowers Toilet Seats
Browse All Toilet Seats — view all styles, shapes & materials
Frequently Asked Questions
How do I know if SP17 is the right fixing pack for my seat?
Check your seat's SKU (printed on the underside of the seat or on the original packaging) against the compatible models listed above. If your SKU is not listed or you are unsure, contact us at customerservice@bubblegumbathrooms.co.uk and we'll confirm compatibility for you.
Does this pack include everything I need?
Yes — the SP17 pack contains all the parts required to install your seat as either top fix or bottom fix. No additional fixings are needed.
Is this a genuine Euroshowers part?
Yes — this is a genuine Euroshowers replacement fixing pack, designed to match the original specification of compatible seats.
Can I order if the item shows as out of stock?
Yes — if stock shows as zero, the item is ordered in specially for you and will typically be dispatched within 4 working days. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 if you have any questions.
Delivery Information
This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Bring an overhead rainfall experience to your bathroom with the Tavistock Cohort concealed dual function shower system. Its ceiling-mounted head creates a clean, uncluttered showering space, while the separate handset makes targeted rinsing easier. Concealed controls keep the pipework out of sight, with Chrome, Brushed Brass and Gunmetal finishes to coordinate with your Cohort brassware.
Key Features
Ceiling-mounted fixed shower head for overhead showering.
Concealed thermostatic mixer with separate temperature and flow controls.
2-way diverter to switch between the fixed head and handset.
Handset outlet with built-in holder, hose and handset included.
Solid brass construction for a robust installation.
Choice of Chrome, Brushed Brass or Gunmetal.
Operating pressure range of 1–5 bar.
10-year manufacturer's guarantee.
What's Included
Cohort concealed mixer valve and 2-way diverter.
Ceiling-mounted shower head.
Handset outlet with built-in wall holder.
Shower handset and hose.
Fixings, fittings and installation instructions.
Technical Specification
Brand: Tavistock
Range: Cohort
Product Type: Thermostatic Shower System
Installation: Concealed valve with ceiling-mounted fixed head and wall-mounted handset outlet
Functions: Two outlets, selected using a 2-way diverter
Controls: Separate temperature and flow controls
Material: Solid brass
Chrome SKU: SCT1619
Brushed Brass SKU: SCT1621
Gunmetal SKU: SCT1622
Minimum Operating Pressure: 1 bar
Maximum Operating Pressure: 5 bar
Guarantee: 10 years
Frequently Asked Questions
What does dual function mean?The system provides a ceiling-mounted fixed head and a separate handset. Use the 2-way diverter to select the outlet you want to use.
Are the handset and hose included?Yes. The handset, hose and wall outlet with built-in holder are included alongside the ceiling head and concealed controls.
What water pressure does it need?The stated operating range is 1–5 bar. Ask your installer to check your available pressure and water supply before ordering, particularly for a gravity-fed system.
What installation access is needed?The concealed valve requires pipework within the wall, and the ceiling head requires a supply routed above the ceiling. Plan access with your plumber before finishing walls and ceilings.
Which finishes can I choose?Chrome (SCT1619), Brushed Brass (SCT1621) and Gunmetal (SCT1622) are available. Select your preferred finish before adding the system to your basket.
Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
Complete the Tavistock Cohort CollectionCoordinate your shower with matching Cohort taps, or compare the alternative shower configurations below. The separately listed single-outlet valve is not a like-for-like replacement for this dual-function system.
Cohort dual function shower system with riser kit and overhead head
Cohort dual function shower system with overhead head and handset outlet
Cohort single outlet concealed thermostatic shower valve and trim
Cohort Cross Head twin handle basin mixer with click waste
Cohort Cross Head deck mounted bath filler
Cohort Cross Head bath shower mixer
Cohort Lever deck mounted bath filler
Cohort Lever bath shower mixer
Bring a classic finishing touch to your basin with the Tavistock Lansdown basin tap pair. Curved spouts, traditional lever handles and white handle detailing create a period-inspired look, with Chrome for a bright finish or Brushed Brass for a warmer scheme. Each tap has quarter-turn operation, providing separate control of the hot and cold water flow at a compatible two tap-hole basin.Key Features
Hot-and-cold pair: two separate pillar taps, each with its own outlet.
Traditional lever handles: white detailing and rounded ends complement the curved spouts.
Quarter-turn operation: a short handle movement controls each tap.
Two finish options: Chrome or Brushed Brass, selected above.
Deck-mounted installation: one tap hole required for each tap.
Low-pressure operation: stated minimum pressure of 0.2 bar, subject to installer checks.
Waste not included: purchase a compatible basin waste separately.
10-year guarantee: listed cover for taps and cartridges, subject to Tavistock's terms.
Technical Specification
Brand: Tavistock
Range: Lansdown
Product type: Traditional basin pillar taps
Supplied as: Hot-and-cold pair
Handle style: Traditional lever
Operation: Quarter-turn
Mounting: Deck mounted
Tap holes required: 2
Finishes: Chrome or Brushed Brass
Minimum operating pressure: 0.2 bar
Chrome SKU: TLD70
Brushed Brass SKU: TLD7004
Basin waste: Not included
Guarantee: 10 years for taps and cartridges, subject to terms
Check Before OrderingConfirm that your basin has two suitable tap holes. Each tap supplies hot or cold water through its own spout; this pair is not a mixer and does not provide thermostatic temperature control. Ask your installer to confirm connection sizes, fitting dimensions, spout reach and available pressure before ordering. A minimum pressure of 0.2 bar does not by itself confirm compatibility with every gravity-fed or mains-fed installation.Frequently Asked QuestionsAre these taps supplied as a pair?Yes. One hot tap and one cold tap are supplied in your chosen finish.Do they have lever or crosshead handles?They have traditional lever handles with white detailing, as shown in the product images.What does quarter-turn operation mean?The handle moves through approximately a quarter turn to operate the tap, rather than requiring several full rotations.Will these fit a single tap-hole basin?No. Each tap needs its own hole, so these are for a compatible two tap-hole basin. A mono basin mixer is a different fitting format.Are they suitable for low-pressure systems?The stated minimum operating pressure is 0.2 bar. Have your installer confirm the pressure available at the taps and compatibility with your water supplies before purchase.Is a waste included?No. Choose a separate waste suited to your basin and its overflow arrangement.What guarantee is included?The listed Tavistock guarantee covers taps and cartridges for 10 years, subject to its terms and installation and care requirements.Can I order if the item shows as out of stock?Yes. You can place an order when stock shows zero, and we will fulfil it when stock becomes available. For an availability estimate or fitting questions, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Tavistock Lansdown CollectionCoordinate your bathroom with the Lansdown Bath Filler or Lansdown Bath Shower Mixer. For a different basin format, explore the Lansdown Twin-Handle Basin Mixer with Click Waste or Lansdown Single-Lever Mono Basin Mixer with Click Waste. These alternatives have different fitting requirements; check the individual specifications before choosing.
A curated selection of smaller bathroom products where a delivery charge applies. These items are posted rather than delivered by pallet or courier, making them ideal for quick, straightforward delivery to your door.
