The McAlpine WC-CONQ is a 90° space saving rigid WC pan connector designed for installations where a standard straight connector won’t reach — particularly useful where the pan is boxed in or set back from the soil pipe. The adjustable 97–107mm inlet suits all standard pan spigots, while the lock-ring inlet seal ensures a secure, leak-free connection. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° space saving bend — ideal for boxed-in or recessed pan installations Adjustable length for flexible positioning 97–107mm inlet suits all standard WC pan spigots 4″/110mm outlet — compatible with PVC-U and cast iron soil pipe (internal diameter) Available with finned outlet (for 110mm PVC-U/cast iron) or plain end outlet (for 110mm soil/underground pipe fittings) Lock-ring inlet seal for a tight, secure connection Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CONQ Barcode: 5036484005939 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.3kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle or length? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8 90° Bent Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Connector – 97-107mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What is the WC-CONQ designed for? The WC-CONQ is specifically designed for space saving installations where the WC pan is boxed in or set back, and a straight connector cannot reach the soil pipe. The 90° bend allows the connector to route around obstructions while maintaining a secure connection. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). Please check which outlet type you require before ordering. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£32.03 £15.00
The McAlpine WC-CON8 is a 90° bent rigid WC pan connector with an adjustable length inlet and double seal on the pan connection — delivering a reliable, leak-free fit with all standard WC pan spigots. The 110mm outlet connects to both PVC-U and cast iron soil pipe, making it suitable for the vast majority of UK domestic installations. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° bend — ideal for pans set at right angles to the soil pipe Adjustable length inlet for flexible positioning 97–107mm inlet suits all standard WC pan spigots Double seal on pan connection for a secure, leak-free fit 4″/110mm outlet — available with finned end (PVC-U/cast iron internal diameter) or plain end (110mm soil/underground pipe fittings) Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON8 Barcode: 503484006097 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.2kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle, length, or flexibility? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What is the difference between the WC-CON8 and the WC-CON8E? The WC-CON8E has an extended inlet for additional reach between the pan spigot and the soil pipe. If you need extra length, choose the WC-CON8E. For a standard 90° connection, the WC-CON8 is the right choice. What does the double seal do? The double seal on the pan connection creates a more secure, leak-free joint between the connector and the WC pan spigot — reducing the risk of seepage even with minor misalignment during installation. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). Please confirm which outlet type you require before ordering. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£17.14 £8.00
The McAlpine HC2650UK is the shallowest combined top access bath trap and waste assembly on the market — with an overall height of just 112mm including the trap and waste. Featuring a 50mm water seal, a swivelling outlet for easy installation, and a spring-loaded mushroom plug for top-access cleaning, it’s the go-to solution for low-clearance bath installations. Available in four finishes to match your bathroom hardware. Key Features Ultra-Low Profile: 112mm overall height — the shallowest top access combined bath trap & waste available Top Access Cleaning: Spring-loaded mushroom plug lifts out for easy hair and debris removal without removing the trap Swivel Outlet: 1½” outlet rotates 360° for flexible positioning during installation 50mm Water Seal: Provides effective odour barrier in compliance with building regulations Universal Multifit Compression Outlet: Suits all plastic, copper, and lead waste pipes Adjustable Overflow Tube: Flexible length adjusts from 330mm to 580mm to suit your bath Four Finishes: Chrome, Matt Black, Brushed Brass, or White — to match your bathroom taps and hardware Conforms to BS EN 274-1:2002: Meets the relevant UK/EU standard for sanitary appliance fittings Technical Specification SKU / MPN: HC2650UK (Chrome) | HC2650UK-WH (White) | HC2650UK-MB (Matt Black) | HC2650UK-BB (Brushed Brass) Brand: McAlpine Water Seal: 50mm Outlet Size: 1½” Universal Compression (Multifit) Outlet Type: Swivel — suits all plastic, copper, and lead pipe Overall Height (incl. trap & waste): 112mm Overflow Tube Length: Adjustable 330mm – 580mm Plug Type: Spring-loaded mushroom plug (top access) Finishes: Chrome Plated Brass | Matt Black | Brushed Brass | White Standard: BS EN 274-1:2002 Country of Origin: United Kingdom Multifit Connections Explained McAlpine Multifit connections suit all plastic waste pipes to BS EN 1451-1:2000 and BS EN 1329-1:2000, copper pipe (metric or imperial), and lead pipe. The moulded internal sleeve centres and supports the pipe, while the Multifit and friction washers create a secure seal. Tighten hand-tight for the best mechanical joint. If a plastic pipe is undersize or out of round, warming the end gently will help it seat over the sleeve. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Frequently Asked Questions Why is the HC2650UK described as the shallowest on the market?The combined overall height of the trap and waste assembly is just 112mm — making it ideal for baths where floor-to-underside clearance is severely restricted, such as freestanding baths on low feet or built-in baths with deep frames. What pipe sizes does the outlet fit?The 1½” Multifit compression outlet suits all standard plastic, copper (metric and imperial), and lead waste pipes without adaptors. My bath has a thick reinforced base — will this fit?If your bath has a thicker than standard baseboard or reinforced frame, you may need the HC2650UK Extension Kit, which lowers the outlet position to accommodate the extra depth. Can the overflow tube length be adjusted?Yes — the flexible overflow tube adjusts from 330mm to 580mm, making it compatible with a wide range of bath overflow heights. Does it require a plumber to install?The HC2650UK is designed for straightforward installation, but if you’re not confident with plumbing work we recommend using a qualified plumber, particularly in a bathroom environment. Can I order if the item shows as out of stock?Yes — contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 and we’ll confirm availability and lead time. Also in the McAlpine HC2650UK Range McAlpine HC2650UK Extension Kit — lowers outlet for reinforced or thick-base baths McAlpine HC2650UK Spares Kit — replacement plug, dome & dip-tube Other McAlpine Bath Traps McAlpine Q10 19mm Shallow Seal Bath Trap — Chrome Multifit Outlet
£26.00 - £43.00
The McAlpine AA10 is a self-ventilating resealing bottle trap — designed for basin and sink installations where secondary ventilation isn't practical. When syphonic conditions occur, the automatic hydraulic action draws air through the bypass columns to break the syphon; once conditions normalise, remaining water falls back to reseal the trap. No mechanical parts, no secondary vent pipe required. Key Features 75mm water seal — superior odour protection; deeper than the standard 50mm seal Self-ventilating / resealing design — eliminates the need for secondary ventilation; no moving parts to fail Adjustable inlet — fits all standard domestic basin and sink wastes 1¼" (32mm) multifit compression outlet — compatible with plastic, copper, and lead waste pipes Polypropylene construction — durable, corrosion-resistant, and chemical-resistant BS EN 274-1:2002 compliant — meets British and European performance standards Technical Specification Model AA10 Type Resealing bottle trap Water Seal 75mm Outlet Size 1¼" (32mm) Outlet Type Multifit compression Inlet Adjustable Material Polypropylene Pipe Compatibility Plastic, copper, lead Standard BS EN 274-1:2002 Weight 0.15kg Brand McAlpine You May Also Need Basin Wastes — Click-clack, pop-up, and slotted basin wastes Basins — Browse our full basin range All Wastes & Drainage — Bath wastes, shower wastes, and traps Frequently Asked Questions What is a resealing bottle trap? A resealing (or self-ventilating) trap is designed to prevent the water seal from being lost under syphonic conditions — where fast-flowing water in the waste pipe creates a vacuum that can suck the water out of a standard trap. The AA10 uses a hydraulic bypass mechanism to break the syphon and allow the trap to reseal automatically, without needing a separate anti-syphon valve or vent pipe. Do I need secondary ventilation with this trap? No — the self-ventilating design of the AA10 eliminates the need for secondary ventilation in most domestic installations. This makes it particularly useful in situations where running a vent pipe is impractical or impossible. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock, and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
£18.00 £8.00
The McAlpine E10 is a shallow basin bottle trap designed for installations where space beneath the basin is limited. Its compact profile makes it ideal for wall-hung basins, vanity units with restricted clearance, and cloakroom sinks — while still providing a reliable 50mm water seal to prevent sewer gases and odours from entering the bathroom. Key Features Shallow compact design — fits where standard bottle traps cannot; ideal for wall-hung basins and fitted vanity units 50mm water seal — effective odour barrier; maintains seal even during periods of non-use 1¼" (32mm) multifit compression outlet — compatible with plastic, copper, and lead waste pipes White polypropylene construction — corrosion and chemical resistant; smooth internal surfaces for optimal flow BS EN 274-1:2002 compliant — meets British and European performance standards Precision-moulded threads — prevent cross-threading during installation Technical Specification Brand: McAlpine Model: E10 Type: Shallow basin bottle trap Water Seal: 50mm Outlet Size: 1¼" (32mm) Outlet Type: Multifit compression Material: Polypropylene Colour: White Pipe Compatibility: Plastic, copper, lead Standard: BS EN 274-1:2002 Weight: 0.15kg SKU: E10 Country of Origin: United Kingdom HS Code: 392290 You May Also Need Basin Wastes — Click-clack, pop-up, and slotted basin wastes Basins — Browse our full basin range All Wastes & Drainage — Bath wastes, shower wastes, and traps Frequently Asked Questions What is the difference between a shallow and standard bottle trap? A standard bottle trap has a deeper body to accommodate the water seal. A shallow bottle trap achieves the same 50mm water seal in a more compact housing — making it suitable for installations where there is limited clearance beneath the basin, such as wall-hung basins or fitted vanity units with a high base. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock, and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£16.95 £5.50
Decorating a room? Replacing a radiator? Normally that means draining the system, dealing with dirty water, and refilling and re-pressurising the boiler afterwards. With these patented Isolating Radiator Tails, you don’t. Fit them once between the radiator and the valve, and from that point on you can remove the radiator in minutes — no draining, no mess, no water waste, no boiler interference. A genuinely clever solution to one of the most frustrating jobs in domestic heating.Sold as a pair (one for each end of the radiator). Fits standard 15mm x ½" BSP radiator valve connections.Key Features Patented Isolating Design — allows the radiator to be removed and refitted without draining the heating system No System Drainage Required — eliminates the need to drain, refill, and re-pressurise the boiler when removing a radiator Fits in Minutes — installs between the existing radiator valve and the radiator tail; no specialist tools required 15mm x ½" BSP — standard connection size compatible with all conventional UK radiator valve installations Sold as a Pair — one tail for each end of the radiator; everything you need for one radiator Suitable for All Standard Radiators — compatible with new builds and existing heating systems Protects Boiler Warranty — avoids the pressure fluctuations and air ingress associated with draining and refilling Eco-Friendly — no water waste from system drainage; no inhibitor top-up required after refitting Time-Saving for Decorators & Plumbers — dramatically reduces the time and disruption of radiator removal jobs How It WorksThe isolating radiator tail fits between your existing radiator valve and the radiator itself. Once installed, it incorporates an internal isolation mechanism that allows you to close off the flow at the tail before disconnecting the radiator — trapping the water in the system rather than releasing it. When you’re ready to refit the radiator, reconnect and reopen. The system stays pressurised and full throughout.Technical Specification Connection Size 15mm x ½" BSP Quantity Pair (2 tails per pack) Design Patented Isolating Valve Compatibility All standard UK radiator valve installations Application Radiator removal without system drainage SKU K96882 EAN 5033696467500 Alt. Part Numbers QBBL650 | 19TD368354 | 368354 Brand Hipkin Complete Your Radiator Installation Crosshead Chrome Radiator Valves – Straight & Angled | 15mm | Pair — classic crosshead chrome valves for traditional radiator installations Kartell Modern Angled Radiator Valves 15mm — contemporary angled radiator valves in brass construction Kartell Anthracite Angled Radiator Valve 15mm — premium anthracite finish angled valve for designer radiators Kartell Matt Black Twin TRV + Lockshield Pack — designer matt black thermostatic radiator valve set Chrome Radiator Valve Pipe Sleeve Kit — pipe sleeves and floor plates for a neat, professional valve finish Honeywell Valencia TRV Lockshield 15mm Angled — thermostatic radiator valve lockshield for temperature control Frequently Asked QuestionsDo I really not need to drain the system to remove a radiator?Correct — that’s the whole point of the patented design. Once the isolating tails are fitted, you close them off before disconnecting the radiator. The water stays in the system. You can remove the radiator, decorate, and refit it without touching the boiler pressure or losing any system water.Can I order if the item shows as out of stock?Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you.Will these fit my existing radiator valves?These tails use a standard 15mm x ½" BSP connection — the most common radiator valve connection size in UK domestic heating systems. They are compatible with all standard radiator valve installations, both new builds and existing systems.Do I need a plumber to fit these?The tails are designed to be straightforward to install. A competent DIYer can fit them, though we always recommend a qualified plumber for any work on a sealed heating system to ensure compliance with building regulations and to protect boiler warranties.How many tails do I need per radiator?Two — one for each end of the radiator (flow and return). This product is sold as a pair, so one pack covers one radiator.Will fitting these affect my boiler warranty?The isolating tails are designed to protect boiler warranties by avoiding the pressure fluctuations, air ingress, and inhibitor dilution that occur when a system is drained and refilled. Always check your specific boiler warranty terms if in doubt.
£20.00 £12.00
The cold water companion to the red handle hot water valve — same proven full-bore butterfly design, same WRAS approval, same quarter-turn simplicity. The KeyPlumb 15mm Cold Water Butterfly Ball Valve features a blue handle for instant cold water identification, eliminating any risk of confusion during installation or maintenance. Nickel-plated brass construction, PN25 pressure rating, and BS EN331 compliance make this a valve you can specify with confidence. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains potable water supplies BS EN331 Compliant — manufactured to the European standard for ball valves Blue Handle — universally recognised cold water identification; industry-standard colour coding (blue = cold, red = hot) Full Bore Design — unrestricted flow path; no pressure drop or flow restriction when fully open Quarter-Turn Operation — fast, positive 90° open/close; lever position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — 25 bar working pressure; well above typical UK mains pressure Temperature Range −10°C to +85°C — suitable for all cold water and low-temperature applications Available in Packs of 1, 2 or 5 — buy the quantity you need at a better per-unit price Technical Specification Size: 15mm Connection Type: Compression (both ends) Valve Type: Butterfly Ball Valve Bore: Full Bore Operation: Quarter-Turn Lever (90°) Handle Colour: Blue (Cold Water) Body Material: Nickel-Plated Brass Working Pressure: PN25 (25 bar) Temperature Range: −10°C to +85°C Approvals: WRAS Approved, BS EN331 SKU (x1): K55582 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — the matching hot water companion; identical spec with red handle identification KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern WRAS approved chrome isolation valve 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between the blue and red handle versions? The blue handle version (this product) is for cold water lines; the red handle version is for hot water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar), well above typical UK mains pressure of 3–5 bar. It is WRAS approved for use on mains potable water supplies. Does this work with plastic pipe as well as copper? This valve uses a standard 15mm compression fitting, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Can this valve be used on a hot water supply? Technically yes — the temperature rating of −10°C to +85°C covers most domestic hot water temperatures. However, for hot water lines we recommend the red handle version to maintain correct colour coding and avoid confusion. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£3.80
The McAlpine ST90CPB-S-70 is a shallow shower trap engineered for low-profile installations where sub-floor clearance is limited. At 70mm overall height with a superior 50mm water seal and 34 litre/min flow rate, it delivers full performance in space-constrained applications — ideal for timber floor constructions, low-profile shower trays, and bathroom renovation projects. The 1½″ BSP solvent weld outlet connects to standard 40mm waste pipework, and the polypropylene body is fully compliant with BS EN 274-1:2002 and BS EN 274-2:2002. ⚠️ Check tray thickness and clearance before ordering. The ST90CPB-S-70 suits tray thickness 5–30mm and requires 70mm clearance beneath the tray. If your tray is 0–23mm thick and you need a Multifit outlet, see the McAlpine ST90CB10-70. If you have less than 70mm clearance, see the McAlpine ST90CPB-S-53 (53mm height). Key Features 70mm overall height — suitable for low-profile installations with restricted sub-floor depth 50mm water seal — superior odour protection; well above the minimum 25mm requirement 34 litres/min flow rate — high drainage performance; prevents water pooling 90mm waste hole — fits standard shower trays with 90mm waste apertures Suits tray thickness 5–30mm 1½″ BSP solvent weld outlet — connects to standard 40mm waste pipework Removable 110mm flange — easy cleaning without disturbing the trap body Complete installation kit — 135° bend, BSP coupling nut, and 1½″ universal connector included Polypropylene construction — durable and corrosion resistant BS EN 274 compliant — tested to BS EN 274-1:2002 and BS EN 274-2:2002 Technical Specification Brand: McAlpine Model: ST90CPB-S-70 SKU: ST90CPB-S-70 EAN: 5036484043870 Type: Shallow shower trap Waste hole diameter: 90mm Overall height: 70mm Under-tray clearance required: 70mm Suitable tray thickness: 5–30mm Water seal depth: 50mm Flow rate: 34 litres/min (tested under 15mm constant head, BS EN 274-2:2002) Thread size: 1½″ BSP Outlet: 1½″ solvent weld Flange diameter: 110mm (removable) Body material: Polypropylene Weight: 0.35kg Country of Origin: United Kingdom Standards: BS EN 274-1:2002 & BS EN 274-2:2002 What's Included McAlpine ST90CPB-S-70 shallow shower trap body 110mm removable flange 135° bend BSP coupling nut 1½″ universal connector Installation instructions Also Available — McAlpine Shallow Shower Traps McAlpine ST90CB10-70 — 90mm, 70mm Height, 50mm Seal, Multifit Outlet — suits tray thickness 0–23mm; Multifit outlet for plastic, copper & lead pipe McAlpine ST90CPB-S-53 — 90mm, 53mm Height, 25mm Seal — for severely restricted clearance where 70mm is not available Coordinate Your Shower Installation Shower Trays — browse compatible low profile trays Shower Enclosures — complete your shower installation Shower Valves & Accessories — valves, heads, and arms Frequently Asked Questions What is the difference between the ST90CPB-S-70 and the ST90CB10-70? Both are McAlpine 90mm shallow traps with 70mm height, 50mm water seal, and 34L/min flow rate. The key difference is tray thickness compatibility and outlet type. The ST90CPB-S-70 (this product) suits tray thickness 5–30mm and has a 1½″ solvent weld outlet. The ST90CB10-70 suits tray thickness 0–23mm and has a Multifit outlet compatible with plastic, copper, and lead pipe. Check your tray thickness and pipework type before ordering. What clearance does this trap require beneath the shower tray? The ST90CPB-S-70 has an overall height of 70mm and requires 70mm of clearance beneath the shower tray. Measure the available depth between the underside of your shower tray and the floor before ordering. If you have less than 70mm available, see the McAlpine ST90CPB-S-53 (53mm height). What tray thickness is this trap suitable for? The ST90CPB-S-70 suits shower trays with a thickness of 5–30mm. If your tray is thinner (0–23mm), the ST90CB10-70 may be more appropriate — check the overlap range for your specific tray thickness. What type of outlet connection does this trap use? The outlet is 1½″ BSP solvent weld, connecting to standard 40mm (1½″) solvent weld waste pipe. A 135° bend, BSP coupling nut, and 1½″ universal connector are included to allow flexible pipe routing beneath the tray. What is the water seal depth, and why does it matter? The water seal depth is 50mm. The water seal is the depth of water retained in the trap that prevents sewer gases from entering the bathroom. The minimum required by UK building regulations is 25mm. A 50mm seal provides significantly better odour protection and is less likely to evaporate in infrequently used showers. If clearance is too restricted for this trap, the ST90CPB-S-53 offers a 25mm seal at just 53mm height. Is this trap BS EN 274 compliant? Yes — the McAlpine ST90CPB-S-70 is fully compliant with BS EN 274-1:2002 (requirements) and BS EN 274-2:2002 (test methods), the relevant British and European standard for sanitary waste fittings. Can I order if the item shows as out of stock? Yes — this product is available to order even when stock shows as zero. Please allow additional lead time and contact us at customerservice@bubblegumbathrooms.co.uk for availability. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£59.00 £34.99
When you need to isolate a hot water supply quickly and confidently, the colour of the handle matters. The KeyPlumb 15mm Hot Water Butterfly Ball Valve features a red handle — the universally recognised identifier for hot water lines — so there's never any ambiguity during installation, maintenance, or an emergency shut-off. A single quarter-turn is all it takes to go from fully open to fully closed. WRAS approved and BS EN331 compliant, this is a valve you can fit and forget — ideal whether you're doing a single tap replacement or fitting out a full bathroom or kitchen. Key Features WRAS Approved — meets UK Water Regulations Advisory Scheme requirements; suitable for use on mains water supplies BS EN331 Compliant — manufactured to the European standard for ball valves for gas and other fluids Red Handle — universally recognised hot water identification; eliminates confusion between hot and cold supplies Full Bore Design — unrestricted flow path maintains system pressure and flow rate Quarter-Turn Operation — fast, positive open/close action; handle position gives instant visual confirmation of valve state Nickel-Plated Brass Body — corrosion-resistant construction for long-term reliability in hot water systems 15mm Compression Fitting — compatible with standard UK 15mm copper and plastic pipe systems PN25 Rated — working pressure up to 25 bar; suitable for all standard domestic and commercial plumbing applications Temperature Range −10°C to +85°C — suitable for hot and cold water systems Technical Specification Size: 15mm Connection Type: Compression Valve Type: Butterfly Ball Valve Bore: Full Bore Operation: Quarter-Turn Lever Handle Colour: Red (Hot Water) Body Material: Nickel-Plated Brass Working Pressure: PN25 (25 bar) Temperature Range: −10°C to +85°C Approvals: WRAS Approved, BS EN331 SKU : K55581 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — the matching cold water companion; WRAS approved, same full bore design KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — chrome-plated brass isolation valve, WRAS approved, for a smarter finish Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve for tight spaces 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression fitting with ½" BSP thread 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer for 15mm pipework; protects valves and appliances from limescale Frequently Asked Questions What is the difference between the red and blue handle versions? The red handle version (this product) is for hot water lines; the blue handle version is for cold water lines. Both are identical in specification — the colour coding is a standard plumbing convention to prevent confusion during installation and maintenance. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. Is this valve suitable for mains pressure systems? Yes — the valve is rated to PN25 (25 bar working pressure), which is well above typical UK mains pressure. It is WRAS approved for use on mains water supplies. Does this work with plastic (push-fit) pipe as well as copper? This valve uses a standard 15mm compression fitting. It is compatible with 15mm copper pipe. For use with plastic pipe, ensure you use the appropriate insert/liner within the compression fitting. If in doubt, contact us at customerservice@bubblegumbathrooms.co.uk for advice. Is professional installation required? While this valve is straightforward to install for a competent DIYer, we recommend professional installation to ensure compliance with building regulations and to maintain any relevant warranties on connected appliances. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£4.80
💷 EXCEPTIONAL VALUE: Save £34.91 - Was £67.91, Now Only £33 (51% Off) 💷 The Reliance Easifit 2-in-1 Thermostatic Mixing Valve is a professional-grade safety device that blends hot and cold water to ensure safe, comfortable water temperature and prevent scalding. With TMV2 and TMV3 certification, WRAS approval, and ultra-compact design, this valve is essential for healthcare facilities, care homes, schools, and any installation where water temperature safety is critical. Key Features & Benefits TMV2 & TMV3 Certified – Meets highest safety standards for domestic and clinical environments Prevents Scalding – Automatically blends hot and cold water to safe temperatures WRAS Approved – Meets UK water regulations for quality and compliance Ultra-Compact Design – Fits in tight spaces where standard TMVs won't Lightweight Construction – Easy to handle and install 15mm Compression Fittings – Standard UK plumbing connections 2-in-1 Functionality – Combines mixing and safety shut-off in one compact unit Clinical Environment Approved – TMV3 certified for healthcare use What's Included Reliance Easifit thermostatic mixing valve body 15mm compression fittings (inlet and outlet) Temperature adjustment mechanism Installation instructions TMV2 and TMV3 certification documentation Technical Specifications Manufacturer: Reliance Water Controls Model: Easifit 2-in-1 Size: 15mm Connection Type: Compression fittings Certification: TMV2 and TMV3 WRAS Approval: Yes Standards Compliance: UK and European performance standards Maximum Inlet Temperature: 85°C (hot water) Outlet Temperature Range: Adjustable (typically 38-43°C) Maximum Working Pressure: 10 bar Minimum Working Pressure: 0.5 bar (balanced supplies) Design: Ultra-compact, lightweight Application: Domestic and clinical environments Barcode: 503125411846 SKU: K99614 Alternative Part Numbers: K99614 | HEAT112010 | 7HERO280 | 469TY | 520-373-0630 | B8068854 | 478786 TMV2 & TMV3 Certification Explained TMV2 Certification: Approved for domestic and commercial applications including homes, hotels, offices, and public buildings. TMV2 valves prevent scalding by maintaining safe water temperatures even if hot or cold supply fails. TMV3 Certification: The highest level of thermostatic mixing valve certification, approved for use in healthcare and clinical environments including hospitals, care homes, nursing homes, and medical facilities. TMV3 valves meet more stringent performance and safety requirements than TMV2. This Easifit valve holds BOTH certifications, making it suitable for the widest range of applications from domestic bathrooms to clinical healthcare settings. How Thermostatic Mixing Valves Work The TMV automatically blends hot and cold water to deliver a safe, pre-set temperature at the outlet. Key safety features include: Temperature Stability: Maintains consistent outlet temperature even when inlet pressures or temperatures fluctuate Fail-Safe Operation: If cold water supply fails, the valve automatically shuts off to prevent scalding Adjustable Output: Temperature can be set to suit specific requirements (typically 38-43°C) Instant Response: Reacts immediately to changes in supply conditions Why TMVs Are Essential Thermostatic mixing valves are legally required in many installations: Healthcare Facilities: Mandatory in hospitals, care homes, and nursing facilities (TMV3 required) Schools & Nurseries: Required to protect children from scalding Care Homes: Essential for vulnerable adults and elderly residents Public Buildings: Recommended for hotels, gyms, and public washrooms Domestic Properties: Best practice for homes with young children or elderly residents Water heated to 60°C (required to kill Legionella bacteria in storage) can cause severe scalding in seconds. TMVs allow safe storage temperatures while delivering safe outlet temperatures. Ultra-Compact Design Benefits The Easifit's ultra-compact and lightweight design offers significant advantages: Fits in tight spaces where standard TMVs won't (under basins, in vanity units, behind panels) Easier to install in retrofit applications with limited access Reduces installation time and complexity Ideal for concealed installations Lightweight for easier handling during installation Applications & Use Cases Healthcare Facilities: Hospitals, clinics, medical centers (TMV3 approved) Care Homes: Nursing homes, assisted living facilities, elderly care Schools & Nurseries: Educational facilities, childcare centers Public Buildings: Hotels, gyms, leisure centers, offices Domestic Bathrooms: Homes with young children or elderly residents Showers & Baths: Point-of-use temperature control Basin Supplies: Handwashing facilities in care and clinical settings Installation Requirements The valve should be installed as close as possible to the point of use (tap, shower, etc.) to minimize the length of pipework at safe temperature. Install with hot water inlet on the left, cold water on the right (when facing the valve). Ensure adequate access for future servicing and temperature adjustment. Professional installation recommended, particularly for TMV3 applications which require commissioning and annual testing. WRAS Approval WRAS (Water Regulations Advisory Scheme) approval confirms this valve meets UK water supply regulations. WRAS-approved products have been independently tested and certified as safe for use in potable water systems, ensuring they won't contaminate drinking water or cause system issues. Maintenance & Testing TMV2 Applications: Annual testing recommended to verify correct operation and temperature output. TMV3 Applications: Annual testing is MANDATORY in healthcare and clinical environments. Testing must be performed by a competent person and records maintained. The valve should be checked for correct temperature output, fail-safe operation, and general condition. Regular maintenance ensures continued safe operation and compliance with regulations. Temperature Setting The outlet temperature is adjustable (typically 38-43°C) to suit specific requirements: 38°C: Standard safe temperature for most applications 41°C: Comfortable shower temperature 43°C: Maximum recommended for general use Temperature should be set during commissioning and verified during annual testing. Building Regulations Compliance TMVs help ensure compliance with: Building Regulations Part G (Sanitation, hot water safety) NHS Estates Health Technical Memorandum HTM 04-01 (healthcare hot water) Care Quality Commission (CQC) requirements for care homes Health and Safety Executive (HSE) guidance on scalding prevention Why Choose Reliance Easifit? Reliance Water Controls is a leading UK manufacturer of thermostatic mixing valves, trusted by healthcare facilities, local authorities, and professional installers nationwide. The Easifit range combines proven reliability with innovative compact design, backed by comprehensive certification and technical support. About Reliance Water Controls Reliance specializes in water temperature control and safety products, with particular expertise in healthcare and care home applications. Their TMVs are engineered to the highest standards and undergo rigorous testing to ensure compliance with TMV2 and TMV3 schemes. Perfect for: Plumbers, heating engineers, healthcare facility managers, care home operators, local authorities, schools, property developers, and anyone requiring certified thermostatic mixing valves for scalding prevention and regulatory compliance. 🛡️ SAFETY CERTIFIED: TMV2 & TMV3 Approved - Save £34.91 🛡️
£67.91 £35.00
The PrimaPress Pressfit Bucket - 100 Pieces is a professional flameless plumbing fittings kit designed for quick, safe, and reliable installations. With no soldering or hot works required, these press-fit fittings offer rapid installation whilst maintaining the highest standards of quality and safety. Backed by an exceptional 50-year manufacturing defect warranty. What's Included This complete 100-piece bucket contains: 30 x Pressfit 15mm Couplers - For joining 15mm copper pipes 10 x Pressfit 22mm Couplers - For joining 22mm copper pipes 10 x Pressfit 22mm x 15mm Fitting Reducers - For connecting 22mm to 15mm pipes 20 x Pressfit 15mm Elbows - 90° bends for 15mm pipe direction changes 10 x Pressfit 22mm Elbows - 90° bends for 22mm pipe direction changes 10 x Pressfit 15mm Tees - T-junctions for 15mm pipe branches 10 x Pressfit 22mm Tees - T-junctions for 22mm pipe branches Why Choose PrimaPress? Quick & simple flameless installation - No soldering, blowtorch, or hot works required 50-year manufacturing defect warranty - Exceptional long-term quality assurance Leak detection feature - Built-in safety mechanism alerts to unpressed fittings Fully traceable - Complete quality control and traceability Compatible with M Profile press tools - Works with standard pressing equipment Hydraulic press tested - Rigorously tested for reliability ISO certified manufacturing - Manufactured to ISO 9001:2008, ISO 14001:2004 and GB/T 19001-2008 Key Features Flameless installation - Safe for occupied buildings and fire-sensitive areas 100 pieces total - Comprehensive kit for multiple installations 15mm and 22mm sizes - Standard UK plumbing pipe sizes Professional quality - Suitable for trade and commercial use Rapid installation - Significantly faster than soldering No hot works permit required - Ideal for hospitals, schools, and occupied premises Leak detection system - Unpressed fittings leak immediately for safety Complete variety - Couplers, elbows, tees, and reducers included Convenient bucket packaging - Easy storage and transport Technical Specifications Brand: PrimaPress by Primaflow Product Type: Pressfit Plumbing Fittings Bucket Total Pieces: 100 fittings Fitting Type: Press-Fit (M Profile) Material: Copper with press-fit mechanism Sizes: 15mm and 22mm Tool Compatibility: M Profile press tools Standards: ISO 9001:2008, ISO 14001:2004, GB/T 19001-2008 Warranty: 50 years manufacturing defect warranty SKU: 30076999 Packaging: Bucket with handle What Are Pressfit Fittings? Pressfit fittings are advanced plumbing fittings that use hydraulic pressing tools to create permanent, leak-free joints without soldering. The press tool compresses the fitting onto the copper pipe, creating a secure mechanical joint. The built-in leak detection feature means any unpressed fitting will leak immediately during testing, ensuring no fittings are accidentally left unpressed. Advantages Over Traditional Soldering No flame or heat - Safe for occupied buildings and fire-sensitive environments Faster installation - Up to 10x quicker than soldering No hot works permit - Eliminates paperwork and restrictions Consistent quality - Every joint is identical and reliable Safer working - No risk of burns or fire hazards Cleaner process - No flux residue or burnt pipe Perfect For Professional plumbers and heating engineers Commercial and industrial installations Hospitals, schools, and care homes (no hot works) Occupied buildings requiring flameless installation Bathroom and heating system installations Hot and cold water supply pipework Renovation projects in sensitive environments Trade professionals requiring rapid installation Projects requiring 50-year warranty coverage Why Choose This Pressfit Bucket? This comprehensive 100-piece bucket provides excellent value and convenience, containing the most commonly used pressfit fittings in the quantities you need for typical installations. The exceptional 50-year warranty demonstrates PrimaPress confidence in their product quality, whilst the flameless installation makes it ideal for sensitive environments where hot works are prohibited or restricted. Note: Pressfit fittings require an M Profile compatible press tool (sold separately). The leak detection feature ensures any unpressed fittings will leak during testing for safety.
£242.40 £169.99
⚠️ This product is no longer available. The Sioux Chief Mini Rester has been discontinued from our range. Please see our replacement: Key Plumb Mini Rester Water Hammer Arrestor (K06947) — same compact design, equivalent specification. Sioux Chief Mini Rester Water Hammer Arrestor - Professional Plumbing Solution The Sioux Chief Mini Rester is a compact, professional-grade water hammer arrestor designed to eliminate annoying banging pipes and protect your plumbing system from damaging pressure surges. This innovative device absorbs shock waves created when water flow is suddenly stopped, preventing the loud hammering noise and potential damage to pipes, valves and appliances. Key Features: Eliminates water hammer and banging pipes Compact mini design for tight installation spaces Professional-grade Sioux Chief quality Easy to install on washing machines, dishwashers and other appliances Protects plumbing system from pressure surges Maintenance-free operation Durable construction for long-lasting performance Suitable for hot and cold water lines What is Water Hammer? Water hammer is the loud banging or knocking noise you hear in pipes when a tap is turned off quickly or an appliance valve closes suddenly. This happens because the fast-moving water creates a shock wave when it's forced to stop abruptly. Over time, water hammer can damage pipes, loosen joints, and cause leaks. A water hammer arrestor like the Mini Rester absorbs these shock waves, protecting your plumbing system. How Does the Mini Rester Work? The Mini Rester contains a sealed air chamber that compresses when water pressure surges occur. This compression absorbs the shock wave energy, preventing it from travelling through your pipes and causing the hammering noise. The compact design makes it ideal for installation in confined spaces where traditional arrestors won't fit. Technical Specifications: Product: Mini Rester Water Hammer Arrestor Type: Compact water hammer arrestor Application: Hot and cold water lines Design: Mini/compact size for tight spaces Operation: Maintenance-free Manufacturer: Sioux Chief Condition: Brand new Common Applications: Washing machine supply lines Dishwasher connections Toilet fill valves Kitchen and bathroom taps Any appliance with quick-closing valves Locations with limited installation space How to Install: Turn off water supply to the affected line Drain the pipe by opening the lowest tap Identify the location closest to the source of water hammer Install Mini Rester on the supply line near the problematic appliance or fixture Ensure proper orientation as per manufacturer's instructions Tighten connections securely Turn water supply back on Test by operating the appliance or fixture Check for leaks at connections Note: Professional installation by a qualified plumber is recommended. Frequently Asked Questions: Q: What causes water hammer in pipes?A: Water hammer is caused by sudden changes in water flow, typically when a valve closes quickly. The fast-moving water creates a shock wave that travels through the pipes, causing the banging noise. Q: Where should I install the Mini Rester?A: Install as close as possible to the source of the water hammer - typically near washing machines, dishwashers, or any appliance with quick-closing solenoid valves. Q: Will one Mini Rester fix all my water hammer problems?A: One arrestor typically protects one appliance or fixture. If you have water hammer in multiple locations, you may need multiple arrestors. Q: Does the Mini Rester need maintenance?A: No, the Mini Rester is maintenance-free and designed for long-lasting, trouble-free operation. Q: Can I use this on both hot and cold water lines?A: Yes, the Mini Rester is suitable for both hot and cold water supply lines. Q: What makes the Mini Rester different from standard arrestors?A: The Mini Rester's compact design allows installation in tight spaces where standard-sized water hammer arrestors won't fit. Q: Will this reduce my water pressure?A: No, water hammer arrestors do not affect normal water pressure or flow. Benefits of Installing a Water Hammer Arrestor: Eliminates annoying banging and knocking noises Protects pipes from damage caused by pressure surges Prevents loosening of pipe joints and fittings Extends the life of appliances and plumbing fixtures Reduces risk of leaks from repeated shock waves Improves overall plumbing system reliability Signs You Need a Water Hammer Arrestor: Loud banging when washing machine fills or stops Knocking sounds when dishwasher operates Pipes rattle when taps are turned off quickly Vibration in walls when appliances cycle Recurring leaks at pipe joints Essential plumbing accessory for protecting your home's plumbing system from damaging water hammer. The Sioux Chief Mini Rester's compact design makes it perfect for tight installation spaces whilst providing professional-grade protection against pressure surges and annoying pipe noise.
£12.00
One bucket, every fitting you need. The Primaflow 180-Piece Copper End Feed Fittings Bucket is a comprehensive, WRAS-approved plumbing kit containing the most commonly used 15mm and 22mm copper fittings for bathroom and heating installations. End feed fittings soldered correctly create permanent, leak-free joints — the professional standard for copper pipework. Convenient bucket packaging for van or workshop storage. Solder, flux, and a blowtorch are required to create joints (not included). What’s Included (180 Pieces) 15mm Couplings 50 pieces — for joining 15mm copper pipes 22mm Couplings 25 pieces — for joining 22mm copper pipes 22–15mm Reducers 10 pieces — for connecting 22mm to 15mm pipes 15mm Elbows (90°) 50 pieces — for 15mm pipe direction changes 22mm Elbows (90°) 25 pieces — for 22mm pipe direction changes 15mm Equal Tees 10 pieces — T-junctions for 15mm pipe branches 22mm Equal Tees 10 pieces — T-junctions for 22mm pipe branches Total 180 fittings Key Features WRAS Approved — Water Regulations Advisory Scheme certified; compliant with UK water regulations End Feed Design — requires soldering for permanent, leak-free joints; the professional standard for copper pipework 15mm & 22mm Sizes — standard UK plumbing pipe sizes; covers the vast majority of domestic installations Copper Construction — durable, corrosion-resistant; long service life 180-Piece Kit — comprehensive selection of the most commonly used fitting types and quantities Bucket Packaging — sturdy bucket with handle; easy storage in van or workshop Technical Specification Brand Primaflow Fitting Type End Feed (solder required) Material Copper Sizes 15mm and 22mm Total Pieces 180 Standards WRAS Approved Packaging Bucket with handle Weight 5kg SKU 30499186 Barcode 5051258062697 What Are End Feed Fittings? End feed fittings are copper plumbing fittings designed to be soldered onto copper pipes, creating permanent, leak-free joints. Unlike push-fit fittings, end feed fittings require the application of flux and solder with heat — offering maximum reliability and the professional standard for permanent copper pipework. You will need solder, flux, and a blowtorch to create joints — these are not included. Typical Applications Bathroom and en-suite plumbing installations Central heating system pipework Hot and cold water supply runs Renovation and new build projects Maintenance and repair work Also Consider PrimaPress Pressfit Bucket – 100 Pieces | Flameless Installation | 15mm & 22mm — the flameless alternative; no soldering required; ideal where heat cannot be used Isolating Radiator Tail 15mm × ½" BSP – Pair — remove radiators without draining; useful for heating installations Frequently Asked Questions Do I need any additional tools or materials? Yes — end feed fittings require solder, flux, and a blowtorch to create joints. These are not included. Ensure you have the appropriate tools and follow safe working practices when soldering. What is the difference between end feed and push-fit fittings? End feed fittings are soldered onto copper pipes to create permanent, leak-free joints — the professional standard for copper pipework. Push-fit fittings require no tools or heat and are faster to install, but end feed joints are generally considered more reliable for permanent installations. What is the difference between end feed and press-fit fittings? Press-fit (pressfit) fittings are crimped onto the pipe using a specialist pressing tool — no heat or solder required. They are faster to install than end feed and ideal where heat cannot be used. See our PrimaPress Pressfit Bucket for a flameless alternative. Are these fittings WRAS approved? Yes — all fittings in this bucket are WRAS (Water Regulations Advisory Scheme) approved, confirming compliance with UK water regulations and suitability for use in potable water systems. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we’ll confirm lead time with you, or call us on 01603 381095.
£240.00 £72.99
The McAlpine Q10 is a 19mm shallow seal bath trap with a chrome-plated multifit compression outlet. Designed for installations where a standard 75mm seal depth isn't achievable — such as low-clearance baths — it maintains an effective water seal to prevent drain odours while fitting neatly into tight spaces. Key Features 19mm shallow water seal — ideal where full-depth traps won't fit beneath the bath Universal multifit compression outlet — compatible with 32mm, 36mm, and 40mm plastic, copper, and lead waste pipes Chrome-plated finish — neat appearance where the trap may be partially visible Polypropylene body — lightweight, corrosion-resistant, and long-lasting Hand-tight installation — no tools required; leak-free seals designed for fibreglass and acrylic baths Compatible with McAlpine bath wastes — integrates seamlessly with McAlpine waste systems Technical Specification Model: Q10 Water seal depth: 19mm (shallow seal) Body material: Polypropylene with chrome finish Outlet type: Multifit compression Outlet compatibility: 32mm, 36mm, 40mm waste pipes (plastic, copper, lead) Suitable for: Fibreglass, acrylic, and steel baths Country of Origin: United Kingdom Barcode: 5036484002587 SKU: Q10 More McAlpine Traps McAlpine E10 Shallow Basin Bottle Trap | 1¼" Outlet | 50mm Seal McAlpine AA10 Resealing Bottle Trap | 75mm Seal | Self-Ventilating McAlpine ST90CPB-S-70 Shallow Shower Trap | 90mm | 70mm Height McAlpine ST90CPB-S-53 Shallow Shower Trap | 90mm | 53mm Height McAlpine ST90CB10-70 Shallow Shower Trap | 90mm | 70mm Height Frequently Asked Questions What is a shallow seal trap? A shallow seal trap retains a smaller water seal depth (19mm in this case) compared to a standard trap (75mm). It is used where there is limited space beneath the bath for a full-depth trap, such as with low-profile or freestanding baths with restricted underside clearance. Will this fit my bath waste? The Q10 uses a multifit compression outlet compatible with 32mm, 36mm, and 40mm waste pipes. It is designed to work with McAlpine bath wastes and most standard bath waste fittings. Check your existing waste outlet size before ordering. Is this suitable for acrylic baths? Yes — the Q10's seals are specifically designed to create a leak-free connection with fibreglass and acrylic bath surfaces, as well as steel baths. Can I order if the item shows as out of stock? Yes — most items can still be ordered when showing as out of stock. Lead times may vary. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering if you need a specific delivery date.
£16.84 £6.00
The McAlpine F26R is a 410mm straight flexible WC pan connector — the ideal solution where rigid connectors won’t reach or where the pan is slightly offset from the soil pipe. The adjustable 97–107mm inlet suits all standard WC pan spigots, the jubilee clip ensures a solid, leak-free connection, and independent testing confirms no sediment build-up in the flexible body. Manufactured in durable polypropylene and compliant with DIN 1389:2015-12. Key Features 410mm flexible body — accommodates offset and awkward pan positions 97–107mm inlet suits all standard WC pan spigots 4″/110mm outlet — fits PVC-U and cast iron soil pipe Jubilee clip connection for a secure, leak-free fit No sediment build-up — independently tested Durable polypropylene construction Complies with DIN 1389:2015-12 Technical Specification SKU: WC-F26R Length: 410mm Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Type: Straight flexible Connection: Jubilee clip Material: Polypropylene Standard: DIN 1389:2015-12 Weight: 0.2kg Brand: McAlpine More McAlpine WC Pan Connectors Need a longer flexible connector or a rigid option? Browse the full McAlpine WC connector range: McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm McAlpine WC-CON2 Straight Adjustable Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm Frequently Asked Questions When should I use a flexible connector instead of a rigid one? Use a flexible connector when the WC pan spigot and soil pipe aren’t perfectly aligned — for example, where the pan is slightly offset, angled, or where a rigid connector can’t bridge the gap cleanly. The F26R’s 410mm flexible body gives you the movement needed to make a secure connection in these situations. What is the difference between the F26R and the F33R? The F33R is 850mm long — more than double the length of the F26R — making it suitable for installations where the soil pipe entry is much further from the pan. Choose the F26R for standard offset situations and the F33R where greater reach is needed. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. Does the flexible body cause sediment build-up? No — independent testing confirms there is no sediment build-up in the flexible body of the F26R, ensuring clear flow performance over the long term. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£39.20 £22.00
The McAlpine WC-CON2 is a straight adjustable rigid WC pan connector — the go-to choice for standard in-line installations where the pan spigot and soil pipe are directly aligned. The adjustable 97–107mm inlet suits all standard WC pan spigots, and the 110mm outlet is compatible with both PVC-U and cast iron soil pipe. Also available with a 3½″/90mm finned outlet for older soil pipe systems. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features Straight rigid connector — ideal for direct in-line pan-to-soil-pipe installations Adjustable length for flexible positioning 97–107mm inlet suits all standard WC pan spigots 110mm outlet — available with finned end (4″/110mm PVC-U/cast iron) or plain end (110mm soil/underground pipe fittings) Also available with 3½″/90mm finned outlet for older soil pipe systems Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON2 Barcode: 5034684005977 Inlet: 97–107mm (adjustable) Outlet: 110mm (finned or plain end) Type: Straight rigid Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.15kg Brand: McAlpine More McAlpine WC Pan Connectors Need a bend, extra reach, or a flexible connector? Browse the full McAlpine WC connector range: McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions When should I use a straight connector rather than a 90° bent connector? Use a straight connector like the WC-CON2 when the WC pan spigot and the soil pipe entry point are directly in line — i.e. the pan faces straight into the wall. If the soil pipe is offset to the side, you’ll need a 90° connector such as the WC-CON8 or WC-CON8E. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The standard 110mm outlet is available with a finned end (for 4″/110mm PVC-U and cast iron soil pipe internal diameters) or a plain end (for 110mm soil or underground pipe fittings). A 3½″/90mm finned outlet version is also available for older soil pipe systems. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£14.39 £7.00
The McAlpine WC-CON8E is a 90° rigid WC pan connector with an extended adjustable inlet — designed for installations where extra reach is needed between the pan spigot and the soil pipe. The adjustable 97–107mm inlet suits all standard WC pan spigots, and the 110mm outlet connects to both PVC-U and cast iron soil pipe. Manufactured in durable polypropylene and compliant with BS 5627:1984 and DIN 1389:2015-12. Key Features 90° bend with extended inlet for greater reach Adjustable length for flexible installation 97–107mm inlet suits all standard WC pan spigots 4″/110mm outlet — fits inside diameter of PVC-U and cast iron soil pipe Durable polypropylene construction Complies with BS 5627:1984 and DIN 1389:2015-12 Technical Specification SKU: WC-CON8E Barcode: 5036484007537 Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Angle: 90° Material: Polypropylene Standards: BS 5627:1984 / DIN 1389:2015-12 Weight: 0.15kg Brand: McAlpine More McAlpine WC Pan Connectors Need a different angle, length, or flexibility? Browse the full McAlpine WC connector range: McAlpine WC-CON2 Straight Adjustable WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8 90° Bent Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine F33R Straight Flexible WC Pan Connector 850mm – 97-107mm x 110mm Frequently Asked Questions What makes the WC-CON8E different from the standard WC-CON8? The WC-CON8E has an extended inlet, giving additional reach between the pan spigot and the soil pipe entry point. This makes it ideal where the pan is positioned further from the wall or where standard connectors fall short. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet fits the inside diameter of 4″/110mm PVC-U and cast iron soil pipe — the standard soil pipe size used in UK domestic installations. Is this a rigid or flexible connector? This is a rigid connector. If you need a flexible connector for awkward or offset installations, see our McAlpine F26R or McAlpine F33R flexible connectors. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£16.95 £8.00
The Kartell Adjustable Basin Bottle Trap combines premium brass construction with intelligent adjustable design, delivering professional-grade performance for round-bottom basins. Finished in lustrous chrome plating that resists tarnishing and corrosion, this vertical bottle trap offers the perfect blend of reliability, functionality, and timeless style for modern bathrooms. Key Features & Benefits Premium Brass Construction – Superior durability and corrosion resistance compared to plastic alternatives Adjustable Design – Vertical orientation with height adjustment for flexible installation Chrome Plated Finish – Lustrous, tarnish-resistant coating maintains appearance for years Round Bottom Type – Specifically designed for round-bottom basin waste outlets Easy Access Cleaning – Removable bottle section for simple maintenance and blockage clearing Leak-Proof Seals – Quality washers and compression fittings ensure watertight connections Lightweight Installation – At just 0.91kg, easy to handle and fit 1-Year Guarantee – Manufacturer's warranty for peace of mind What's Included Kartell adjustable bottle trap body (chrome plated brass) Inlet connection (basin waste connection) Outlet connection (wall/floor waste pipe connection) Compression washers and seals Installation instructions 1-year manufacturer's guarantee Technical Specifications Manufacturer: Kartell Material: Brass Finish: Chrome plated (CP) Type: Bottle trap, vertical orientation Basin Type: Round bottom basins Inlet Size: 32mm (1¼") Outlet Size: 32mm (1¼") Adjustability: Vertical height adjustment Water Seal Depth: 75mm (standard UK requirement) Weight: 0.91kg Warranty: 1 year Barcode: 5055681400392 SKU: WAS021 Why Choose Brass Over Plastic? Brass bottle traps offer significant advantages over plastic alternatives. The solid brass construction provides superior strength, preventing cracking under stress or temperature changes. Chrome-plated brass resists corrosion from cleaning chemicals and maintains its lustrous appearance indefinitely, while plastic traps can discolour, become brittle, and degrade over time. For installations where the trap is visible, brass delivers a premium aesthetic that complements quality basin and tap finishes. Adjustable Design Benefits The vertical adjustability allows you to accommodate varying basin heights, waste pipe positions, and installation constraints. This flexibility is particularly valuable when replacing existing traps, working with non-standard plumbing configurations, or installing basins at custom heights. The adjustment mechanism maintains a secure, leak-proof seal throughout its range. Installation & Compatibility Designed for round-bottom basins with standard 32mm (1¼") waste outlets. Compatible with slotted and unslotted basin wastes. Suitable for wall-mounted and pedestal basins where vertical space allows. The trap connects to standard 32mm waste pipes using compression fittings. Professional installation recommended, though suitable for competent DIY with basic plumbing knowledge. Maintenance & Cleaning The bottle section unscrews easily for access to the water seal chamber, allowing you to clear blockages, remove debris, or retrieve accidentally dropped items (rings, earrings, etc.) without dismantling the entire trap. Regular cleaning maintains optimal flow and prevents odours. The chrome finish wipes clean with a soft cloth—avoid abrasive cleaners that may damage the plating. Applications Perfect for residential bathrooms, en-suites, cloakrooms, commercial washrooms, hotels, offices, and care facilities. Ideal for new installations, bathroom renovations, or replacing worn plastic traps with premium brass alternatives. Particularly suited to visible installations where aesthetics matter. About Kartell Kartell is a trusted UK manufacturer of quality bathroom products, known for reliable performance, thoughtful engineering, and excellent value. Their brass waste products are engineered to professional standards and backed by comprehensive warranties. Perfect for: Plumbers, bathroom installers, property developers, landlords, and homeowners seeking durable, adjustable, premium-quality basin bottle traps with professional-grade performance and timeless chrome aesthetics. 💷 SAVE £15: Was £37, Now Only £22 (41% Off)
£37.00 £26.00
A professional-grade adjustable basin bottle trap in polished chrome-plated brass — the Kartell WAS030 combines reliable drainage performance with an attractive finish that looks equally good concealed or on show. The adjustable height accommodates different basin waste outlet and wall pipe positions, making installation straightforward even where dimensions don't align perfectly. Key Features Adjustable height — variable adjustment to align with different basin waste outlets and wall waste pipe positions Solid brass construction — premium material for durability and longevity; 0.86kg weight reflects quality build Polished chrome finish — lustrous, corrosion-resistant; easy to clean; coordinates with chrome taps and accessories Compact dimensions — 125mm wide; fits beneath standard vanity units, pedestal basins, and wall-hung basins Standard UK fittings — straightforward installation 1-year guarantee — Kartell manufacturer warranty Technical Specification Model WAS030 Type Adjustable basin bottle trap Width 125mm Depth 315mm Height 62mm Material Solid brass Finish Chrome plated (polished) Weight 0.86kg Adjustability Variable height Guarantee 1 year Brand Kartell You May Also Need Basin Wastes — Click-clack, pop-up, and slotted basin wastes to pair with this trap Basins — Browse our full basin range All Wastes & Drainage — Bath wastes, shower wastes, and traps Frequently Asked Questions Why choose an adjustable bottle trap? Adjustable bottle traps are essential where basin waste outlets and wall waste pipes don't align perfectly — which is common in renovation projects or where basins are being replaced. The adjustable height lets you fine-tune the trap position during installation, ensuring a proper seal without needing to alter the pipework. Is this trap suitable for all basins? This trap uses standard UK basin waste fittings and the adjustable height accommodates a range of outlet and pipe positions. Always confirm the inlet and outlet sizes match your basin waste and waste pipework before ordering. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock, and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
£34.50 £25.00
Transform the look of a visible basin installation with the Kartell WAS025 square adjustable bottle trap. Where round traps disappear beneath a basin, this one earns its place — its sharp geometric profile and high-gloss chrome finish make it a deliberate design statement that complements wall-hung basins, glass vanity tops, and contemporary cloakroom suites. Built from solid brass with a corrosion-resistant chrome-plated finish, it's made to last and easy to keep clean. Key Features Square geometric profile — clean architectural lines that suit contemporary and minimalist schemes Adjustable height — variable adjustment to align with different basin waste outlets and wall waste pipe positions Solid brass construction — premium material for durability and long-term performance High-gloss chrome finish — corrosion-resistant, easy to clean, coordinates with chrome taps and accessories Compact 125mm width — fits beneath narrow vanity units and wall-hung basins with limited clearance 1-year Kartell guarantee — backed by the manufacturer Technical Specification Model: WAS025 Type: Adjustable basin bottle trap Profile: Square Width: 125mm Depth: 315mm Material: Solid brass Finish: Chrome plated (gloss) Weight: 0.82kg Adjustability: Variable height Guarantee: 1 year Brand: Kartell Complete the Kartell Wastes & Traps Range WAS025 — Square Adjustable Bottle Trap Chrome — you are here WAS030 — Adjustable Basin Bottle Trap Chrome Kartell Adjustable Basin Bottle Trap Chrome Round Bottom WAS006 — Easy Clean Basin Waste Chrome Slotted Clic-Clac WAS200 — Universal Basin Waste Chrome / Matt Black / Brushed Brass WAS001 — Basin Waste Chrome Brass Slotted with Metal Plug & Chain Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Frequently Asked Questions How quickly will my order be dispatched? If the item shows as in stock, it will be dispatched within 48 hours. If the item is showing as 0 stock, it is ordered in specially for you and will typically be dispatched within 4 working days. Is delivery free? Yes — free UK delivery is included on all Kartell products. Why choose a square bottle trap over a round one? Square bottle traps offer a more contemporary, architectural look that suits modern minimalist bathrooms. They're particularly effective in visible installations beneath wall-hung basins or glass vanity tops, where the trap becomes part of the overall design. Functionally they perform identically to round bottle traps. Is this trap suitable for all basins? This trap connects to standard UK basin waste fittings and the adjustable height allows it to accommodate different waste outlet and pipe positions. Always check inlet and outlet sizes match your basin waste and pipework before ordering. Can I order if the item shows as out of stock? Yes — this product can be ordered even when showing as out of stock and we'll fulfil your order as soon as stock is available. If you need a specific delivery timeframe, please contact us at customerservice@bubblegumbathrooms.co.uk before ordering.
£58.00 £26.99
Not all isolation valves are the same — and this one is specified for a reason. The KeyPlumb 15mm Flat Face Compression x ½" BSP Isolation Valve is the correct valve for installations where a basin mono tap with a flexi tail connects to a 15mm copper supply pipe. The flat face compression end grips the pipe without an olive, while the ½" male BSP thread connects directly to the flexi tail. A flathead screwdriver closes it off in a quarter-turn. Chrome-plated brass, neat, and built to last behind a basin pedestal for years. Key Features Flat Face Compression Inlet — 15mm flat face compression fitting; connects to copper pipe without a traditional olive; provides a secure, leak-proof seal ½" BSP Male Thread Outlet — standard ½" male BSP thread; connects directly to flexi tails on basin mono taps, kitchen taps, and similar fixtures Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact for tight under-basin spaces Chrome-Plated Brass Body — corrosion-resistant construction with a polished chrome finish; professional appearance for exposed installations Isolates Individual Fixtures — allows a tap or fixture to be isolated for maintenance without shutting off the water supply to the whole property Hot & Cold Water — suitable for both hot and cold water supply lines 1-Year Manufacturer's Guarantee — backed by KeyPlumb warranty When to Use This Valve This valve is specifically designed for installations where: A basin mono tap (single lever, one tap hole) is being fitted with a flexi tail connection The supply pipe is 15mm copper and the tap tail is ½" BSP (the UK standard) A flat face compression fitting is required rather than a standard olive-and-nut compression If your installation uses a standard CxC compression connection (no BSP thread), see our Straight Chrome Isolation Valve or Full Bore Isolation Valve instead. Technical Specification Size: 15mm Inlet Connection: 15mm Flat Face Compression Outlet Connection: ½" BSP Male Thread Operation: Screwdriver Slot (quarter-turn) Body Material: Chrome-Plated Brass Application: Basin Mono Taps, Flexi Tail Connections, Hot & Cold Water Guarantee: 1 Year SKU: K23853 Alt. Part Numbers: KPSTRFLA15 Brand: KeyPlumb Country of Origin: China Complete Your Valve Range 15mm Straight Chrome Isolation Valve – CxC (WRAS) — standard CxC compression isolation valve; WRAS approved; for direct pipe-to-pipe isolation KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; WRAS approved 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a flat face compression fitting? A flat face compression fitting connects to the pipe using a flat sealing face rather than a traditional olive (ferrule). The pipe end is inserted and the nut is tightened, compressing the flat face against the pipe to create a watertight seal. It is commonly used in isolation valves where a BSP thread outlet is also required, such as this valve for basin mono tap installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. What is the difference between this valve and a standard CxC isolation valve? A standard CxC (compression-to-compression) isolation valve has compression fittings on both ends and is used to isolate a section of pipe. This valve has a flat face compression inlet on one end and a ½" BSP male thread on the other — making it specifically designed to connect a 15mm supply pipe directly to a flexi tail on a basin tap. If you don't need a BSP thread outlet, use the straight CxC isolation valve instead. Will this fit my basin mono tap flexi tail? Yes — provided your flexi tail has a standard ½" BSP female connection (the UK standard for basin mono taps), this valve will connect directly. Check your tap's flexi tail specification if unsure. Is this valve WRAS approved? This valve carries a 1-year manufacturer's guarantee and is suitable for domestic hot and cold water supply. If you specifically require a WRAS-approved valve, please see our WRAS Approved Straight Isolation Valve or WRAS Approved Full Bore Isolation Valve. Can this be used on a hot water supply? Yes — this valve is suitable for both hot and cold water supply lines in standard domestic plumbing applications. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£1.25
The valve behind the basin. The one under the sink. The one that lets you change a tap washer without turning off the water to the whole house. The KeyPlumb 15mm Straight Isolation Valve is a fundamental plumbing component — compact, chrome-plated, WRAS approved, and built to sit quietly in place for years until the moment it's needed. A flathead screwdriver is all it takes to isolate any individual fixture. Available as a single valve or pack of 10 for trade use. Key Features WRAS Approved — independently certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Straight Pattern — inline configuration for direct pipe runs; ideal for basin, tap, and fixture isolation Screwdriver Slot Operation — quarter-turn flathead screwdriver; tamper-resistant and compact in tight spaces behind basins and under sinks Chrome-Plated Finish — corrosion-resistant, professional appearance; suits exposed installations CxC Compression Fittings — compression-to-compression connection both ends; compatible with standard 15mm copper and plastic pipe 15mm Size — the standard domestic pipe size for basin, tap, toilet, and appliance supply lines Hot & Cold Water — suitable for all standard domestic hot and cold water supply applications Single or Pack of 10 — buy what you need; pack of 10 offers the best per-unit value for trade use Technical Specification Size: 15mm Pattern: Straight (inline) Connection Type: Compression to Compression (CxC) Operation: Screwdriver Slot (quarter-turn) Finish: Chrome Plated Application: Hot & Cold Water, Basin, Tap & Fixture Isolation Approvals: WRAS Approved SKU (Single): K06926 SKU (x10): K06926 x10 Alt. Part Numbers: KPISO15 | 502CP Brand: KeyPlumb Country of Origin: China Complete Your Valve Range KeyPlumb 15mm Full Bore Isolation Valve – Chrome (WRAS) — full bore version for maximum flow; ideal where flow rate matters 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread for specific fitting types 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle; no screwdriver needed 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — full bore butterfly valve for hot water lines; quarter-turn lever 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — full bore butterfly valve for cold water lines; quarter-turn lever KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is a straight isolation valve used for? A straight isolation valve is fitted inline on a water supply pipe to allow a single fixture — such as a basin tap, toilet cistern, or kitchen tap — to be isolated for maintenance or replacement without turning off the water supply to the whole property. It's one of the most commonly fitted plumbing components in domestic installations. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. What is the difference between a straight and angled isolation valve? A straight (inline) valve is used where the pipe runs directly to the fixture — the valve sits in the pipe run without changing direction. An angled valve (90°) is used where the pipe comes up from the floor or out from the wall and needs to turn before connecting to the fixture. Choose based on your pipe configuration. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It's a quarter-turn (90°) operation — fast and positive. Does this work with plastic pipe as well as copper? This valve uses standard CxC compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Why buy the pack of 10? The pack of 10 offers the best per-unit price and is ideal for trade use, full bathroom or kitchen fits, or keeping a stock of spares on hand. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£1.25 - £11.50
The workhorse of the isolation valve world. The KeyPlumb 15mm Full Bore Isolation Valve is the valve you fit and forget — tucked neatly behind a basin, under a sink, or inline on a supply pipe, ready to do its job when you need it. A screwdriver slot keeps it tamper-resistant and compact in tight spaces, while the full bore design ensures zero flow restriction when open. Chrome-plated brass construction, WRAS approval, and EN1254-2 compression fittings on both ends make this a specification-grade valve at a trade-friendly price. Key Features WRAS Approved — independently tested and certified for use on mains potable water supplies; meets UK Water Supply (Water Fittings) Regulations Full Bore Design — unrestricted 15mm flow path when open; no pressure drop or flow restriction Screwdriver Slot Operation — quarter-turn flathead screwdriver operation; tamper-resistant and compact for tight spaces Chrome-Plated Brass Body — nickel-plated brass with chrome finish; corrosion-resistant and professional in appearance EN1254-2 Compression Fittings — standard compression connections both ends; compatible with 15mm copper and plastic pipe 10 Bar Rated — maximum operating pressure well above typical UK mains (3–5 bar) Up to 95°C — suitable for hot and cold water systems and heating circuits Hot & Cold Water — suitable for all standard domestic plumbing and heating applications Technical Specification Size: 15mm Connection Type: EN1254-2 Compression (both ends) Valve Type: Full Bore Isolation Valve Operation: Screwdriver Slot (quarter-turn) Body Material: Nickel-Plated Brass Finish: Chrome Plated Max Working Pressure: 10 bar (145 psi) Max Working Temperature: 95°C Application: Hot & Cold Water, Heating Systems Approvals: WRAS Approved, EN1254-2 SKU (x1): K06922 Alt. Part Numbers: KPFBISO15 | 1003CP Brand: KeyPlumb Country of Origin: China Complete Your Valve Range Straight Isolation Valve – Chrome 15mm (WRAS) — straight-pattern chrome isolation valve; WRAS approved 15mm Chrome Isolation Valve – Flat Face Compression — flat face compression with ½" BSP thread 15mm Hot Water Butterfly Ball Valve – Red Handle (WRAS) — quarter-turn lever butterfly valve for hot water lines 15mm Cold Water Butterfly Ball Valve – Blue Handle (WRAS) — quarter-turn lever butterfly valve for cold water lines 15mm Chrome Lever Isolation Valve – Black Handle — CxC compression lever valve with contemporary black handle KeyPlumb 15mm Electrolytic Scale Reducer — inline scale reducer to protect valves and appliances from limescale Frequently Asked Questions What is the difference between a full bore and standard bore isolation valve? A full bore valve maintains the same internal diameter as the connected pipework (15mm), so there is no restriction to flow when the valve is open. A standard bore valve has a reduced internal diameter which can restrict flow and cause a pressure drop. For applications where flow rate matters — showers, baths, washing machines — always choose full bore. Can I order if the item shows as out of stock? Yes — we can fulfil this product even when stock shows as zero. Place your order as normal and we'll confirm lead time with you. How do I operate a screwdriver slot isolation valve? Use a standard flathead screwdriver. When the slot is parallel to the pipe, the valve is open. When the slot is perpendicular (across) the pipe, the valve is closed. It's a quarter-turn (90°) operation. Is this valve suitable for heating systems? Yes — the 95°C maximum temperature rating makes this valve suitable for heating system pipework, including radiator isolation and boiler connections, within standard domestic operating temperatures. Does this work with plastic pipe as well as copper? This valve uses EN1254-2 compression fittings, compatible with 15mm copper pipe. For plastic pipe, use the appropriate insert/liner within the compression fitting to prevent the olive from crushing the pipe wall. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.
£2.70
The McAlpine F33R is an 850mm straight flexible WC pan connector — the long-reach solution for installations where the soil pipe entry is well away from the pan, or where significant offset or awkward routing is needed. At more than double the length of the F26R, it gives plumbers and installers the flexibility to make a clean, secure connection in even the most challenging bathroom layouts. Includes a wall pipe clip for added support. Manufactured in durable polypropylene and compliant with DIN 1389:2015-12. Key Features 850mm flexible body — ideal for long-reach and heavily offset installations 97–107mm inlet suits all standard WC pan spigots 4″/110mm outlet — fits PVC-U and cast iron soil pipe No sediment build-up — independently tested Wall pipe clip included for additional support Durable polypropylene construction Complies with DIN 1389:2015-12 Technical Specification SKU: WC-F33R Barcode: 5036484500458 Length: 850mm Inlet: 97–107mm (adjustable) Outlet: 4″/110mm Type: Straight flexible Material: Polypropylene Standard: DIN 1389:2015-12 Weight: 0.35kg Brand: McAlpine What’s Included McAlpine F33R flexible WC pan connector (850mm) Wall pipe clip More McAlpine WC Pan Connectors Need a shorter flexible connector or a rigid option? Browse the full McAlpine WC connector range: McAlpine F26R Straight Flexible WC Pan Connector 410mm – 97-107mm x 110mm McAlpine WC-CON2 Straight Adjustable Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8 90° Bent Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CON8E 90° Extended Inlet Rigid WC Pan Connector – 97-107mm x 110mm McAlpine WC-CONQ 90° Space Saving Rigid WC Pan Connector – 97-107mm x 110mm Frequently Asked Questions When should I use the F33R instead of the F26R? Choose the F33R when the soil pipe entry point is significantly further from the WC pan than a standard connector can bridge, or where the routing requires a longer flexible run. At 850mm, it’s more than double the length of the F26R (410mm) and is the right choice for long-reach or heavily offset installations. What pan spigot sizes does this fit? The adjustable inlet fits all standard WC pan spigots in the 97–107mm range, covering the vast majority of UK toilet pans. What soil pipe does the outlet connect to? The 110mm outlet fits 4″/110mm PVC-U and cast iron soil pipe — the standard soil pipe size used in UK domestic installations. Does the flexible body cause sediment build-up? No — independent testing confirms there is no sediment build-up in the flexible body of the F33R, ensuring clear flow performance over the long term. Can I order if the item shows as out of stock? Yes — we can order this product for you even if it shows as out of stock. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£39.20 £27.00
You have seen 24 out of 28 products
Browse our range of plumbing fittings — pipe connectors, adaptors, and fittings for bathroom and kitchen plumbing installations. Products in this collection are items that customers have requested directly, with more being added regularly.
Can’t see the fitting you need? Call us on 01603 381095 or drop us a message and we’ll do our best to source it for you.
Subscribe to our emails
