Refresh a compatible close-coupled WC with the Roper Rhodes 40mm Universal Flush Button Upgrade. Choose Brushed Bronze, Brushed Brass, Brushed Nickel, Gunmetal or Black to coordinate the cistern button with your taps and bathroom accessories without replacing the whole suite.This rod-operated push-button upgrade has adjustable rods to suit a compatible cistern mechanism. The 40mm designation is a nominal product size, not a confirmed drilling dimension. Check the exact mounting opening, rod alignment and existing valve before ordering: “universal” does not mean it fits every WC.Key Features Five finishes: Brushed Bronze, Brushed Brass, Brushed Nickel, Gunmetal and Black. 40mm nominal version: an alternative to the separately listed 48mm button. Adjustable rods: allow the control to be set for a compatible valve and cistern lid arrangement. Mechanical push-button operation: not a pneumatic or contactless sensor kit. Replacement or style upgrade: refresh the visible control where the existing mechanism is suitable. Technical Specification Brand: Roper Rhodes Product type: close-coupled cistern flush button upgrade Nominal size: 40mm Mounting opening: confirm against the exact button and cistern before purchase; nominal size is not a drilling specification Operation: mechanical push button with adjustable rods Brushed Bronze code: TR9051 Brushed Brass code: TR9038 Brushed Nickel code: TR9055 Gunmetal code: TR9047 Black code: TR9026 Compatibility & InstallationThe existing product information lists Roper Rhodes Debut, Dana and Orbit, and Tavistock Orbit, Structure, Ion, Lansdown and Levant. Confirm the actual cistern and valve fitted, as different versions or replacement mechanisms may affect suitability.Before ordering, compare the existing button and lid opening with the required mounting arrangement. Your installer should check panel or lid thickness, internal clearance, rod reach and alignment with the valve. Do not drill or enlarge a ceramic lid using the nominal 40mm size as a template.Follow the attached installation guide when assembling and adjusting the button. Set the rods so the valve is not held down when the button is released, then check operation with the lid in its final position. Retain access for maintenance.This is not a universal replacement for cable-operated, pneumatic or electronic controls. A matching opening alone does not establish compatibility.Frequently Asked QuestionsDoes 40mm mean the exact hole size?Not necessarily. It is the nominal product designation. Confirm the required mounting dimensions for the selected part before ordering or modifying a lid.Will it fit my close-coupled cistern?Check the cistern model, existing valve, mounting opening, internal clearance and rod alignment. The listed ranges are a starting point, not a guarantee for every version or replacement mechanism.Which code corresponds to each finish?Brushed Bronze is TR9051, Brushed Brass TR9038, Brushed Nickel TR9055, Gunmetal TR9047 and Black TR9026.Are the rods adjustable?Yes. Check that their adjustment suits your actual valve-to-lid arrangement. Do not assume the adjustment dimensions of the separate 48mm model apply to this version.Is it a pneumatic or sensor button?No. This is a mechanical push-button upgrade with rods. Check the operating mechanism as well as the visible size before choosing a replacement.Will it change the flush volume?Flush volume depends on the cistern and valve settings, not the button finish or nominal size.Is a larger version available?Yes. The separate 48mm upgrade is linked below and is listed for compatible cistern lid openings measuring 48–57mm. Check its own fitting requirements before choosing.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for all five finishes, subject to supplier availability. For a current lead time or help identifying the right button, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Compare Flush Button UpgradesView the 48mm Universal Flush Button Upgrade, a separate size for compatible cisterns with a 48–57mm lid opening. It is an alternative, not an additional component required with this button.
£21.00
A discreet, premium quality round dual flush button designed for use with all Tavistock and Roper Rhodes pneumatic concealed cisterns. The 75mm round profile delivers a clean, minimalist look that suits both contemporary and traditional bathroom schemes, while the purely pneumatic operation means no wiring or batteries are ever needed. Available in five premium finishes — Matt Black, Brushed Brass, Gunmetal, Brushed Nickel, and Brushed Bronze — to coordinate with your chosen bathroom scheme. Key Features 75 × 75mm round profile — discreet, minimal footprint Dual flush pneumatic operation — conserves water, no wiring required Compatible with all Tavistock & Roper Rhodes pneumatic concealed cisterns 5 premium finishes — Matt Black, Brushed Brass, Gunmetal, Brushed Nickel, Brushed Bronze Easy-clean smooth surface on all finishes Made in the UK Technical Specification Brand: Tavistock / Roper Rhodes SKUs: TR9022 (Matt Black) | TR9034 (Brushed Brass) | TR9045 (Gunmetal) | TR9054 (Brushed Nickel) | TR9050 (Brushed Bronze) Dimensions: 75(w) × 75(h) × 90(d) mm Flush type: Dual flush (pneumatic) Compatibility: All Tavistock & Roper Rhodes pneumatic concealed cisterns Country of Origin: United Kingdom Compatible Tavistock Cisterns Tavistock In-Wall Concealed Cistern | TR9009 | Dual Flush 6/3L | WRAS Approved Tavistock Vortex VOR790 Concealed Cistern | Dual Flush 3/6L | 135mm Slimline Tavistock Apex Side Inlet Concealed Cistern | TR9002 | Dual Flush 3/6L Tavistock TR9008 Comfort Height Concealed Cistern | 6/3L Dual Flush Other Tavistock Flush Buttons Tavistock Square Dual Flush Button | TR9028 | 3 Finishes Tavistock Oval Dual Flush Button | 4 Finishes Roper Rhodes Contactless Dual Flush Remote Sensor Kit | TR9014 Frequently Asked Questions Which cisterns is this button compatible with?This round flush button is compatible with all Tavistock and Roper Rhodes pneumatic concealed cisterns, including the TR9009, VOR790, TR9002, and TR9008. If you’re unsure, email us with your cistern model and we’ll confirm. Does this require any electrical connection?No — this is a purely pneumatic button. It operates via air pressure through a tube connected to the cistern. No wiring or batteries are required. Why are some finishes priced differently?Matt Black is priced lower than the premium metallic finishes (Brushed Brass, Gunmetal, Brushed Nickel, Brushed Bronze). Select your preferred finish above to see the individual price. Is this suitable for a traditional bathroom?Yes — the round profile works well in both contemporary and traditional settings. Chrome suits traditional schemes; Brushed Brass suits warmer, heritage-inspired bathrooms. How quickly will my order be dispatched?If the item shows as in stock, it will be dispatched within 48 hours. If the item is showing as 0 stock, it is ordered in specially for you and will typically be dispatched within 4 working days. Can I order if the item shows as out of stock?Yes — you can still place an order and we’ll source it for you. Contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095 if you need a lead time estimate.
£19.99 - £37.99
Bring a classic finishing touch to your basin with the Tavistock Lansdown basin tap pair. Curved spouts, traditional lever handles and white handle detailing create a period-inspired look, with Chrome for a bright finish or Brushed Brass for a warmer scheme. Each tap has quarter-turn operation, providing separate control of the hot and cold water flow at a compatible two tap-hole basin.Key Features Hot-and-cold pair: two separate pillar taps, each with its own outlet. Traditional lever handles: white detailing and rounded ends complement the curved spouts. Quarter-turn operation: a short handle movement controls each tap. Two finish options: Chrome or Brushed Brass, selected above. Deck-mounted installation: one tap hole required for each tap. Low-pressure operation: stated minimum pressure of 0.2 bar, subject to installer checks. Waste not included: purchase a compatible basin waste separately. 10-year guarantee: listed cover for taps and cartridges, subject to Tavistock's terms. Technical Specification Brand: Tavistock Range: Lansdown Product type: Traditional basin pillar taps Supplied as: Hot-and-cold pair Handle style: Traditional lever Operation: Quarter-turn Mounting: Deck mounted Tap holes required: 2 Finishes: Chrome or Brushed Brass Minimum operating pressure: 0.2 bar Chrome SKU: TLD70 Brushed Brass SKU: TLD7004 Basin waste: Not included Guarantee: 10 years for taps and cartridges, subject to terms Check Before OrderingConfirm that your basin has two suitable tap holes. Each tap supplies hot or cold water through its own spout; this pair is not a mixer and does not provide thermostatic temperature control. Ask your installer to confirm connection sizes, fitting dimensions, spout reach and available pressure before ordering. A minimum pressure of 0.2 bar does not by itself confirm compatibility with every gravity-fed or mains-fed installation.Frequently Asked QuestionsAre these taps supplied as a pair?Yes. One hot tap and one cold tap are supplied in your chosen finish.Do they have lever or crosshead handles?They have traditional lever handles with white detailing, as shown in the product images.What does quarter-turn operation mean?The handle moves through approximately a quarter turn to operate the tap, rather than requiring several full rotations.Will these fit a single tap-hole basin?No. Each tap needs its own hole, so these are for a compatible two tap-hole basin. A mono basin mixer is a different fitting format.Are they suitable for low-pressure systems?The stated minimum operating pressure is 0.2 bar. Have your installer confirm the pressure available at the taps and compatibility with your water supplies before purchase.Is a waste included?No. Choose a separate waste suited to your basin and its overflow arrangement.What guarantee is included?The listed Tavistock guarantee covers taps and cartridges for 10 years, subject to its terms and installation and care requirements.Can I order if the item shows as out of stock?Yes. You can place an order when stock shows zero, and we will fulfil it when stock becomes available. For an availability estimate or fitting questions, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Tavistock Lansdown CollectionCoordinate your bathroom with the Lansdown Bath Filler or Lansdown Bath Shower Mixer. For a different basin format, explore the Lansdown Twin-Handle Basin Mixer with Click Waste or Lansdown Single-Lever Mono Basin Mixer with Click Waste. These alternatives have different fitting requirements; check the individual specifications before choosing.
£104.00 - £119.00
Tavistock Cohort Concealed Dual Function Shower System with Ceiling Head & Handset Outlet Experience true overhead rainfall with the Tavistock Cohort Concealed Dual Function Shower System with Ceiling Head. The ceiling-mounted fixed head delivers an immersive rainfall experience, while the 2-way diverter lets you switch to the wall-mounted handset outlet for targeted rinsing. The concealed mixer valve keeps all pipework hidden, and the complete handset outlet — including built-in holder, hose, and handset — is included in the box. Available in three premium finishes: Chrome, Brushed Brass, and Gunmetal. Solid brass construction throughout, backed by a 10-year manufacturer’s guarantee. Key Features Ceiling-mounted fixed head — true overhead rainfall experience Concealed mixer valve — dual control (temperature & flow), all pipework hidden behind the wall 2-way diverter — switch between ceiling head and handset Complete handset outlet included — built-in holder, hose, and handset all in the box Solid brass construction throughout 3 premium finishes — Chrome, Brushed Brass, Gunmetal Minimum 1 bar / Maximum 5 bar pressure 10-year manufacturer’s guarantee What’s Included Tavistock Cohort concealed mixer valve Ceiling-mounted shower head Handset with built-in wall holder Shower hose 2-way diverter Fixing kit and fittings Installation instructions Technical Specification SKUs: SCT1619 (Chrome) / SCT1621 (Brushed Brass) / SCT1622 (Gunmetal) Range: Cohort Brand: Tavistock Type: Concealed Dual Function Thermostatic Shower System with Ceiling Head Valve Style: Concealed mixer, dual control Diverter: 2-way Material: Solid brass Available Finishes: Chrome, Brushed Brass, Gunmetal Min. Pressure: 1 bar Max. Pressure: 5 bar Guarantee: 10 Years HS Code: 848180 Country of Origin: China Also in the Tavistock Cohort Collection Cohort Shower System – Overhead & Riser Kit Cohort Shower System – Overhead & Handset Outlet Cohort Concealed Shower Valve & Trim Set Cohort Cross Head Bath Filler Cohort Cross Head Bath Shower Mixer Cohort Lever Bath Filler Cohort Lever Bath Shower Mixer Frequently Asked Questions What pressure is required? This system requires a minimum of 1 bar and a maximum of 5 bar. It is suitable for combination boilers and unvented systems. It is not suitable for gravity-fed or low-pressure systems below 1 bar. Does this require ceiling access for installation? Yes — the ceiling-mounted head requires access above the ceiling for pipework routing, in addition to the wall access needed for the concealed valve. Professional installation by a qualified plumber is essential. Is the handset and hose included? Yes — this system includes a complete handset outlet with built-in wall holder, hose, and handset. Everything needed is in the box. Can I buy just the valve separately? Yes — the Cohort Concealed Shower Valve & Trim Set is available separately if you want to specify your own shower heads and accessories. Can I order if the item shows as out of stock? Yes — we can accept orders even when stock shows as unavailable. Lead times may vary; please contact us at customerservice@bubblegumbathrooms.co.uk for availability.
£469.00 - £549.00
Finish your bath with a neat, easy-to-use Tavistock slotted click waste. A simple press operates the plug, and a choice of four finishes helps it sit comfortably alongside your bathroom fittings.Key Features Simple click-to-operate mechanism Slotted bath waste design Available in Brushed Brass, Chrome, Gloss White and Matt Black Brass construction and 10-year guarantee Technical Specification Brand: Tavistock Type: Slotted click bath waste Material: Brass Dimensions stated: 60mm depth, 55mm height, 60mm width Finish / SKU: Brushed Brass DC17043; Chrome DC17042; Gloss White DC17040; Matt Black DC17041 Guarantee: 10 years Explore the Tiverton BathView the Tiverton freestanding roll top bath. The Tiverton already includes a chrome waste. This separate Tavistock waste has not been confirmed as compatible with it; please check before ordering them together.Frequently Asked QuestionsHow does this waste work?Press the click mechanism to open or close the waste.What finishes are available?Brushed Brass, Chrome, Gloss White and Matt Black.Will it fit the Tiverton bath?Compatibility has not been confirmed, and the Tiverton includes a chrome waste. Email customerservice@bubblegumbathrooms.co.uk for advice before ordering this as an alternative.Can I order if it shows as out of stock?Yes, for this non-clearance item, contact customerservice@bubblegumbathrooms.co.uk to check availability and lead time.
£36.99 - £66.00
Coordinate your flush control with the rest of your bathroom using the Roper Rhodes 48mm Universal Flush Button Upgrade. Choose Brushed Bronze, Brushed Brass, Brushed Nickel, Gunmetal or Black to complement your taps and accessories, while refreshing a compatible close-coupled cistern's push-button control.Designed for 48–57mm cistern lid openings, this rod-operated upgrade has adjustable rods for a distance of up to 250mm from the top of the flush valve to the top of the cistern lid. Check the opening, valve mechanism and available space before ordering: “universal” does not mean it fits every cistern.Key Features Five coordinating finishes: Brushed Bronze, Brushed Brass, Brushed Nickel, Gunmetal and Black. 48mm nominal size: intended for lid openings measuring 48–57mm. Rod-operated control: for compatible close-coupled cistern mechanisms. Adjustable reach: up to 250mm between the stated valve and lid reference points. Replacement or style upgrade: refresh the visible button without assuming the complete cistern needs replacing. Technical Specification Brand: Roper Rhodes Product type: close-coupled cistern flush button upgrade Nominal size: 48mm Cistern lid opening: 48–57mm Operation: mechanical push button with adjustable rods Maximum adjustment: 250mm from the top of the flush valve to the top of the cistern lid Brushed Bronze code: TR9052 Brushed Brass code: TR9039 Brushed Nickel code: TR9056 Gunmetal code: TR9048 Black code: TR9027 Compatibility & InstallationThe existing product information lists Roper Rhodes Coast and Tavistock Minerva, Cadence, Compass, Aerial, Micra Evo, Loft and Marston. Check the actual cistern and valve fitted, as replacement mechanisms or different versions can affect suitability.Measure the lid opening and the distance from the top of the flush valve to the top of the lid. Ask your installer to confirm the rod alignment, mounting arrangement and clearance. The nominal 48mm size is not a finished face dimension or a universal drilling instruction.Use the attached installation guide when assembling and adjusting the button. Check that the rods operate the valve without keeping it pressed, then test the flushing action with the lid in its final position. Retain access for maintenance.This is a rod-operated push-button upgrade, not a pneumatic control or contactless sensor kit. Do not assume it will replace a cable-operated, pneumatic or electronic button without confirming the mechanism.Frequently Asked QuestionsWill this fit my cistern?Check for a 48–57mm lid opening, a compatible rod-operated valve arrangement and a valve-to-lid distance within the stated 250mm adjustment. A matching opening alone does not establish compatibility.What does the 250mm adjustment measure?It is measured from the top of the flush valve to the top of the cistern lid, not the overall cistern height.Which finish codes should I choose?Choose TR9052 for Brushed Bronze, TR9039 for Brushed Brass, TR9056 for Brushed Nickel, TR9048 for Gunmetal or TR9027 for Black.Is this a contactless sensor button?No. It is a mechanical push button with rods. The separately listed TR9032 sensor kit is an alternative upgrade with different valve and lid-hole requirements.Will it change my cistern's flush volume?The button operates the compatible valve. Flush volume depends on the cistern and valve settings, not the finish or nominal button size.Is there a smaller alternative?Yes, a separate 40mm universal flush button upgrade is linked below. Check that product's own opening range and fitting requirements before choosing.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for all five finishes, subject to supplier availability. For a current lead time or fitting advice, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Compare Flush Button Upgrades 40mm Universal Flush Button Upgrade, an alternative size; check its own fitting requirements. TR9032 Contactless Sensor Flush Upgrade Kit, a separate option requiring a compatible paddle-operated valve and 48–56mm lid opening.
£20.00
Refresh a compatible concealed cistern with the Tavistock SP12169 Round Pneumatic Dual Flush Button. Its 75mm round face and polished chrome finish provide a neat finishing touch alongside chrome taps and bathroom accessories, without the need for batteries or an electrical connection.This pneumatic button operates the cistern through air tubing. Choose it by the SP12169 part number and your cistern's fitting requirements, not simply by its appearance or the diameter of an existing button.Key Features Chrome finish: coordinates with classic and contemporary bathroom fittings. 75mm round face: a compact alternative to a larger rectangular flush plate. Pneumatic dual flush: operates a compatible cistern's reduced and full flush functions. No electrical supply: no wiring or batteries required. Replacement part: SP12169 for compatible Tavistock and Roper Rhodes pneumatic concealed cistern installations. Technical Specification Brand: Tavistock / Roper Rhodes Part number: SP12169 Product type: round pneumatic dual flush button Finish: polished chrome Face size: 75mm wide × 75mm high Operation: pneumatic Flush control: dual flush Power requirement: none Application: compatible pneumatic concealed cisterns Compatibility & InstallationThis listing identifies SP12169 for Tavistock and Roper Rhodes pneumatic concealed cisterns. Confirm the exact cistern model and button connections before ordering, including for a cistern supplied within a wall-hung WC frame. A matching brand or frame type alone does not confirm the fit.Check the mounting opening, panel thickness, rear clearance and pneumatic tubing arrangement with your installer. The 75mm face measurement is not a drilling or cut-out dimension. Do not drill a panel based on that measurement.Retain access to the cistern for maintenance and follow the fitting instructions. After installation, check both flush functions and ensure the air tubing is connected securely without kinks. Flush volumes are determined by the compatible cistern setup, not by the button alone.Frequently Asked QuestionsWhich cisterns will this button fit?It is listed for compatible Tavistock and Roper Rhodes pneumatic concealed cisterns. Check SP12169 against your exact model and connections before ordering. If you are unsure, email your cistern model and photographs to customerservice@bubblegumbathrooms.co.uk.Can it be used with a wall-hung WC frame?Only where the frame's cistern and button mounting arrangement are compatible with SP12169. It is not a universal replacement for every frame or flush plate.Does it need batteries or wiring?No. The button works pneumatically through air tubing connected to a compatible cistern.Is 75mm the hole size?No. It describes the button face. Confirm the required mounting opening and clearance from the fitting instructions before drilling or modifying a panel.Can it replace a cable-operated or mechanical button?Do not assume so. This is a pneumatic button and requires the correct pneumatic cistern mechanism and connections.Are other finishes available?A separate round-button listing offers Black, Brushed Brass, Gunmetal, Brushed Nickel and Brushed Bronze. Check the selected finish's own product code and installation requirements.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for this non-clearance item, subject to supplier availability. For a current lead time, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Is delivery free?This is a small, postable item covered by the one-off small item delivery charge described below.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Tavistock Flush CollectionCompare these alternative finishes and button styles, checking compatibility before choosing: Round Dual Flush Button in Other Finishes Square Pneumatic Dual Flush Button Oval Pneumatic Dual Flush Button Related Concealed CisternsIf replacing more than the button, compare these cistern options and confirm the required control separately: TR9009 In-Wall Concealed Cistern Vortex VOR790 Insulated Pneumatic Concealed Cistern Apex TR9002 Side-Inlet Concealed Cistern TR9008 Comfort Height Concealed Cistern
£26.50 £16.00
Prepare a compatible close-coupled WC for a sensor upgrade or replace its existing flush valve with the Tavistock & Roper Rhodes TR9033 Paddle-Operated Flush Valve. With a 2-inch base, it is a retrofit option identified in the manufacturer's TR9031 and TR9032 sensor-kit technical sheets when a suitable paddle-operated valve is not already fitted.Check the existing valve, cistern outlet and available internal space before ordering. A sensor upgrade does not automatically require a new valve if your compatible cistern already has the correct mechanism.Key Features Paddle-operated mechanism: for compatible close-coupled cistern installations. 2-inch base: match the existing cistern outlet and fitting requirements before purchase. Replacement option: suitable where TR9033 is confirmed as the correct valve for your cistern. Sensor-upgrade preparation: identified as a retrofit option in the TR9031 and TR9032 technical sheets. Listed dimensions: 130mm wide × 285mm high; check internal clearance before ordering. Technical Specification Brand: Tavistock / Roper Rhodes Product code: TR9033 Product type: close-coupled cistern flush valve Operation: paddle operated Base size: 2 inches Listed width: 130mm Listed height: 285mm Related sensor kits: TR9031 and TR9032, sold separately Compatibility & InstallationThe TR9031 and TR9032 technical sheets identify TR9033 as a retrofit paddle-operated valve option. The TR9031 sheet specifically lists Roper Rhodes Geo, Cover and Accent, and Tavistock Vibe, when fitted with this compatible valve.Your installer should confirm the exact cistern, outlet size, sealing arrangement, internal height and operating connections before purchase. A 2-inch base does not establish universal compatibility. Follow the manufacturer's instructions when replacing the valve and check for leaks and correct flushing after fitting.When adding a sensor kit, check its lid-hole requirement separately: TR9031 fits 38–46mm openings and TR9032 fits 48–56mm openings. Those measurements describe the sensor's lid opening, not this valve's base.Frequently Asked QuestionsDo I need TR9033 for every sensor upgrade?No. Check whether your compatible cistern already has a suitable paddle-operated flush valve. TR9033 is the manufacturer's identified retrofit option where one is needed.Which sensor kits identify this valve?The TR9031 and TR9032 technical sheets both identify TR9033 as a retrofit paddle-operated valve option. Confirm the complete WC and kit compatibility before purchase.Can I use it as a replacement valve?Yes, where TR9033 is confirmed as the correct replacement for your close-coupled cistern. Compare the outlet, mounting, internal space and operating arrangement with your installer.Is the sensor kit included?No. This listing is for the TR9033 flush valve. TR9031 and TR9032 sensor kits are separate products.Is the 2-inch base the sensor hole size?No. The base relates to the valve fitting in the cistern. Sensor-kit compatibility also depends on the separate opening in the cistern lid.Will it work with any pneumatic concealed cistern?Do not assume so. This is a paddle-operated close-coupled flush valve, not a universal pneumatic concealed-cistern valve.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for this non-clearance item, subject to supplier availability. For a current lead time or help identifying the right part, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your Flush UpgradeChoose the sensor kit that matches your compatible cistern lid opening. These are alternative sizes, not two kits needed together: TR9031 Contactless Flush Upgrade Kit, for 38–46mm lid openings. TR9032 Contactless Flush Upgrade Kit, for 48–56mm lid openings.
£41.80 £25.00
Upgrade a compatible close-coupled WC to touch-free flushing with the Tavistock & Roper Rhodes TR9032 Contactless Flush Kit. Wave your hand over the sensor for a reduced flush or hold it in place for one second for a full flush. This larger-hole version fits 48–56mm cistern lid openings and requires a compatible paddle-operated flush valve.Battery operation avoids a mains connection, while a manual full-flush option remains available when the batteries run out. Check the lid opening and valve mechanism before ordering rather than choosing by WC appearance alone.Key Features Touch-free dual flush: wave for reduced flush; hold for one second for full flush. Larger-hole fit: for cistern lid openings measuring 48–56mm. Paddle-valve compatibility: confirm the existing flush valve before ordering. Battery powered: four AA batteries required, not included. Manual backup: full flush remains available when batteries are depleted. Expected battery life: approximately 12 months according to the technical sheet; actual life varies with use. Fixings included: stated on the TR9032 technical sheet. Sensor clearance: allow around 30cm above to help prevent unintended activation. Technical Specification Brand: Tavistock / Roper Rhodes Model: TR9032 Product type: contactless cistern flush upgrade kit Sensor: infrared Compatible valve: paddle operated Cistern lid hole: 48–56mm Reduced flush activation: hand wave Full flush activation: hold hand over sensor for one second Power: 4 × AA batteries, not supplied Expected battery life: approximately 12 months Manual override: full flush Clearance above sensor: approximately 30cm Fixings: included Compatibility & InstallationThe manufacturer's TR9032 technical sheet states compatibility with paddle-operated flush valves and 48–56mm cistern lid holes. Its named WC ranges are: Tavistock: Aerial and Micra Evo. R2: Serenity. Check your actual valve and lid measurements even where the range is listed. If a paddle-operated valve is not fitted, the manufacturer identifies TR9033 as a retrofit valve option, sold separately. Have your installer confirm it suits the exact cistern before purchase.Leave around 30cm of clear space above the sensor and retain access for batteries and maintenance. This close-coupled upgrade kit is not interchangeable with a remote sensor kit intended for pneumatic concealed cisterns.What's IncludedThe technical sheet's parts guide lists a control box, battery box, battery-box cradle, stainless steel hanger, clamp and pneumatic hook, clamp collar, button with securing nut, and infrared sensor. Four AA batteries are required separately.Frequently Asked QuestionsHow do I activate each flush?Wave your hand over the sensor for a reduced flush. Hold it over the sensor for one second for a full flush. Flush volumes depend on your cistern and valve setup.Will it fit my cistern lid?The opening must measure 48–56mm and the kit needs a compatible paddle-operated valve. Confirm both before ordering.Which WC ranges are named in the technical sheet?The TR9032 sheet lists Tavistock Aerial and Micra Evo, and R2 Serenity. For another WC, confirm the valve type, opening size and installation clearance rather than assuming a fit.What if my lid hole is smaller?The separately listed TR9031 is the alternative for 38–46mm openings. It is not an additional component required with TR9032. Measure your opening before choosing.What if my valve is not paddle operated?The manufacturer identifies TR9033 as a retrofit valve option. Ask your installer to verify cistern compatibility before changing the valve.Are batteries included?No. Four AA batteries are required. The manufacturer gives an expected battery life of approximately 12 months, although use and battery quality affect this.Can I still flush when the batteries run out?Yes. The button retains a manual full-flush option.How much clearance is needed?Leave around 30cm of clear space above the sensor, as advised in the technical sheet, to help prevent accidental activation.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for this non-clearance item, subject to supplier availability. For a current lead time or compatibility help, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Tavistock & Roper Rhodes Contactless Flush Collection TR9031 Contactless Flush Upgrade Kit, alternative for 38–46mm cistern lid holes. TR9033 Close Coupled Flush Valve, retrofit valve option subject to cistern compatibility. TR9014 Contactless Dual Flush Remote Sensor Kit, a separate option for compatible pneumatic concealed cisterns.
£129.50 £85.00
Add touch-free flushing to a compatible WC with the Tavistock & Roper Rhodes TR9031 Contactless Sensor Flush Upgrade Kit. Wave your hand for a reduced flush, or hold it over the sensor for one second for a full flush. It is designed for paddle-operated flush valves and cistern lid holes measuring 38–46mm, so check both before ordering.Battery operation avoids the need for a mains connection, while a manual full-flush option remains available when the batteries run out.Key Features Touch-free dual flush: wave for reduced flush; hold your hand over the sensor for one second for full flush. Retrofit format: for compatible paddle-operated valves with a 38–46mm cistern lid hole. Battery powered: uses four AA batteries, not supplied. Manual backup: manual full flush remains available when batteries are depleted. Expected battery life: approximately 12 months, as stated by the manufacturer; actual life varies with use. Fixings included: confirmed by the TR9031 technical sheet. Clearance requirement: allow around 30cm above the sensor to avoid unwanted triggering. Technical Specification Brand: Tavistock / Roper Rhodes Model: TR9031 Product type: contactless cistern flush upgrade kit Sensor: infrared Compatible valve: paddle operated Cistern lid hole: 38–46mm Reduced flush activation: hand wave Full flush activation: hold hand over sensor for one second Power: 4 × AA batteries, not included Expected battery life: approximately 12 months Manual override: full flush Sensor clearance: approximately 30cm above Fixings: included Compatibility & InstallationConfirm that your existing valve is paddle operated and measure the actual lid hole before ordering. This is not a universal replacement for every flush mechanism or a direct substitute for a pneumatic concealed-cistern remote sensor kit.The manufacturer's TR9031 technical sheet lists these Roper Rhodes Group WC ranges: Roper Rhodes: Minerva; Geo, Cover and Accent when fitted with compatible TR9033 flush valve. Tavistock: Structure, Ion, Micra, Lansdown and Orbit; Vibe when fitted with compatible TR9033 flush valve. R2: Minerva, Langford, Radar and Debut. Where a paddle-operated valve is not fitted, the manufacturer identifies TR9033 as a retrofit valve option, sold separately. Have your installer confirm it suits the exact cistern before purchasing. Leave approximately 30cm of clear space above the sensor and retain access for battery replacement and maintenance.What's IncludedThe technical sheet's parts guide lists the control box, battery box, battery-box cradle and hanger, clamp collar, stainless steel pneumatic hook, clamp and hanger, button with securing nut, and infrared sensor. Four AA batteries are required separately.Frequently Asked QuestionsHow do I select a reduced or full flush?Wave your hand over the sensor for a reduced flush. Hold your hand over it for one second for a full flush. Flush volumes depend on your cistern and valve setup.Will it fit my toilet?It needs a compatible paddle-operated flush valve and a 38–46mm cistern lid hole. Check your actual valve and measurements, even if your WC range is listed.What if I do not have a paddle-operated valve?The manufacturer identifies TR9033 as a separately available retrofit valve. Your installer should confirm compatibility with your cistern before changing the valve.Are batteries supplied?No. You need four AA batteries. The manufacturer gives an expected life of approximately 12 months, although usage and battery quality affect this.Can I flush when the batteries run out?Yes. The button retains a manual full-flush option when the batteries are depleted.How much space is needed above the sensor?Allow around 30cm of clear space above it, as advised in the technical sheet, to help prevent unintended activation.What if my lid hole is larger than 46mm?Do not assume TR9031 will fit. Compare the separately listed TR9032 larger-hole kit and check its specified fit range against your lid before ordering.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for this non-clearance item, subject to supplier availability. For a current lead time or compatibility help, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Tavistock & Roper Rhodes Contactless Flush Collection TR9033 Close Coupled Flush Valve, retrofit valve option subject to cistern compatibility. TR9032 Larger-Hole Sensor Flush Upgrade Kit, an alternative size rather than an additional kit required with TR9031. TR9014 Contactless Dual Flush Remote Sensor Kit, a separate option for compatible pneumatic concealed cisterns.
£129.50 £95.00
Give your concealed cistern installation a softer finishing detail with the Tavistock Oval Pneumatic Dual Flush Button. Its 157 × 85mm face creates a broad oval profile that complements curved bathroom fittings, with Chrome, Black, Brushed Brass or Gunmetal options to coordinate your scheme.Pneumatic actuation operates by air pressure, without wiring or batteries for the button. Separate reduced and full flush controls work with the settings of your compatible cistern.Key Features Oval profile: listed 157mm-wide × 85mm-high face. Dual flush selection: choose the reduced or full flush provided by the connected cistern. Pneumatic control: no electrical connection or batteries required for button operation. Four finish options: Chrome, Black, Brushed Brass and Gunmetal. Concealed cistern installation: intended for compatible Tavistock and Roper Rhodes pneumatic systems. Technical Specification Brand: Tavistock / Roper Rhodes Product type: oval dual flush button Actuation: pneumatic Listed face width: 157mm Listed face height: 85mm Chrome SKU: TR9023 Black SKU: TR9040 Brushed Brass SKU: TR9041 Gunmetal SKU: TR9046 Power: no wiring or batteries required for the button Cistern: sold separately Installation & CompatibilityConfirm the exact cistern model, pneumatic connections and mounting requirements with your installer before ordering. A dual-flush cistern is not automatically compatible if its existing actuator is mechanical or electronic.Check the cut-out dimensions, panel thickness, clearance behind the panel and tube arrangement against the manufacturer's instructions. The oval face measurements are not drilling dimensions. Where this button replaces a service-access flush plate, provide a separate opening for future cistern maintenance.Frequently Asked QuestionsWhich finish corresponds to each product code?Chrome is TR9023, Black is TR9040, Brushed Brass is TR9041 and Gunmetal is TR9046. Select your required finish above.Does the button need an electrical supply?No. It operates pneumatically using air pressure through its connection to a compatible cistern, without wiring or batteries.Will this replace any flush button?No universal replacement fit is implied. Check the actuation type, pneumatic connections, required cut-out and panel clearance before ordering.Does it set the amount of water flushed?The button selects the reduced or full flush. The actual volumes depend on the cistern and its adjustment, not the shape of the button.Can it be used with TR9009?The TR9009 technical sheet permits a compatible pneumatic button in place of a flush plate, provided separate maintenance access is arranged. Confirm connections and mounting details before fitting.What size opening should I drill?Follow the manufacturer's fitting instructions for the selected model. Do not use the 157 × 85mm face size as a cut-out template or begin drilling until the mounting dimensions are confirmed.Can I order if the item shows as out of stock?This non-clearance product can be ordered in subject to supplier availability. If checkout is unavailable or you need a current lead time, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your InstallationCompare these pneumatic concealed cisterns and confirm the full installation requirements before ordering: Tavistock TR9009 In-Wall Concealed Cistern Tavistock Apex TR9002 Side-Inlet Concealed Cistern Tavistock Vortex VOR790 Concealed Cistern Tavistock TR9008 Comfort-Height Concealed Cistern Also in the Tavistock Flush Button RangeCompare the Tavistock Square Pneumatic Dual Flush Button for an alternative angular face design.
£50.00 - £85.00
Add a crisp finishing detail to your concealed cistern installation with the Tavistock Square Pneumatic Dual Flush Button. Its 72mm square face brings a clean, architectural look to a bathroom furniture panel or compatible mounting surface. Choose Chrome, Black or Brushed Brass to complement your fittings.Pneumatic actuation uses air pressure rather than an electrical connection, with separate reduced and full flush operation on a compatible cistern.Key Features Square profile: listed 72 × 72mm face for a contemporary finish. Dual flush control: select the reduced or full flush provided by your compatible cistern. Pneumatic actuation: no wiring or batteries required for the button. Three finish options: Chrome, Black and Brushed Brass. Concealed cistern control: intended for compatible Tavistock and Roper Rhodes pneumatic systems. Technical Specification Brand: Tavistock / Roper Rhodes Product type: square dual flush button Actuation: pneumatic Listed face dimensions: 72mm wide × 72mm high Chrome SKU: TR9003 Black SKU: TR9028 Brushed Brass SKU: TR9035 Power: no electrical connection or batteries required for button operation Cistern: sold separately Installation & CompatibilityMatch the button to your cistern's pneumatic flush mechanism before ordering. A concealed cistern is not automatically compatible simply because it has dual flush; confirm the exact model, air connections and mounting requirements with your installer.Check the required cut-out, panel thickness, clearance behind the panel and pneumatic tube arrangement against the manufacturer's fitting instructions. The 72mm face size is not a drilling dimension. Where a button is used instead of a service-access flush plate, provide a separate accessible opening to maintain the cistern.Frequently Asked QuestionsWhich model code should I order?Choose Chrome TR9003, Black TR9028 or Brushed Brass TR9035. TR9028 identifies the Black option, not all three finishes.Does the button need electricity?No. The pneumatic button operates using air pressure through its connection to a compatible cistern, without wiring or batteries.Will it fit any dual-flush toilet?No universal fit is implied. It is intended for compatible pneumatic concealed cisterns. Check the exact cistern model and connections before ordering, especially when replacing a mechanical or electronic control.Does it determine the flush volumes?The button selects the reduced or full flush; the actual volumes depend on the connected cistern and its setup.Can I use it with TR9009?The TR9009 technical sheet permits a compatible pneumatic button instead of a flush plate, but requires separate maintenance access. Confirm the button connections and installation details before fitting.Can I order if the item shows as out of stock?This non-clearance product can be ordered in subject to supplier availability. If checkout is unavailable or you need a current lead time, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your InstallationCompare these pneumatic cistern options, confirming the full installation requirements before purchase: Tavistock TR9009 In-Wall Concealed Cistern Tavistock Apex TR9002 Side-Inlet Concealed Cistern Tavistock Vortex VOR790 Concealed Cistern Tavistock TR9008 Comfort-Height Concealed Cistern
£16.00 - £38.00
Keep your bathroom's flushing system discreet with the Tavistock TR9009 In-Wall Concealed Cistern. Designed for tiled-in installations, it combines an insulated tank with pneumatic dual-flush operation and service access through a compatible flush-plate aperture, helping you plan a clean finish without overlooking future maintenance.The manufacturer's technical sheet specifies a 138–194mm installation void, a side-entry inlet and adjustable flush settings. Flush plates are available separately, so you can choose a compatible visible control to complement your bathroom.Key Features Adjustable dual flush: 3/6-litre flush option, with adjustment details provided in the installation instructions. Pneumatic operation: pneumatic flush valve with push-button actuation. Insulated tank: polystyrene jacket helps reduce condensation on the cistern body. Side-entry inlet: ½-inch BSP connection. Top and front access: internal parts serviceable through the flush-plate aperture when installed as instructed. Air-gap inlet valve: fitted as stated in the manufacturer's technical sheet. Installation flexibility: specified for a 138–194mm void and 20–95mm cladding with adjustable flush-plate mounting. Fixings included: confirmed in the TR9009 technical sheet. Technical Specification Brand: Tavistock / Roper Rhodes Product code: TR9009 Product type: in-wall concealed cistern Flush mechanism: pneumatic dual flush Flush option: adjustable 3 / 6 litres Working-pressure range: 0.1–10.0 bar Inlet: side entry, ½-inch BSP Required void depth: 138–194mm, per manufacturer's technical sheet Cladding thickness: 20–95mm with adjustable flush-plate mounting Access: top and front; parts serviceable through the flush-plate aperture Insulation: polystyrene jacket Flush pipe: greater-than-90-degree design with securing bracket Vertical flush-pipe length: 177–327mm Fixings: included Flush plate: sold separately Installation & CompatibilityHave your installer check the pan's inlet position, pipework, available void, cladding thickness and service opening before purchase. The manufacturer's sheet gives 327mm as the flush inlet pipe height to the pan and states that the pipe can be cut down for different inlet locations. Follow the installation instructions rather than treating any single dimension as a universal fitting position.Maintain access to the working parts after tiling. A compatible pneumatic button can be used instead of a plate, but the manufacturer requires separate maintenance provision in that arrangement. This cistern is not a load-bearing support frame; any wall-hung pan needs a suitable support system.Frequently Asked QuestionsWhat depth of void does the cistern need?The manufacturer's technical sheet specifies a 138–194mm void. It also notes that battens can be used where a deeper void is required. Have your installer confirm the complete installation clearance.What thickness of cladding can be used?The sheet specifies 20–95mm for adjustable flush-plate mounting. Check the chosen plate and installation instructions before preparing the finished surface.Is a flush plate included?No. Compatible flush plates are sold separately. The linked Premium Pneumatic Flush Plate range lists TR9009 compatibility.Can I use a flush button instead?Yes, the manufacturer permits a compatible flush button, provided separate access is made for maintenance in place of the flush-plate opening.What water pressure does it require?The manufacturer's technical sheet specifies a working-pressure range of 0.1–10.0 bar. Your installer should check your actual supply and connection requirements.Can the flush volumes be adjusted?Yes. The sheet lists a 3/6-litre adjustable option. It also describes a minimum achievable setting of 4.5 litres full flush and 2.6 litres reduced flush using the specified valve adjustments. Have your installer follow the instructions and confirm suitability for your WC pan.Does it need to be removed for servicing?The sheet states that all parts are serviceable through the flush-plate aperture when the installation provides the intended access. Do not tile over or obstruct the maintenance opening.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for this non-clearance product, subject to supplier availability. For a current lead time, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your InstallationTavistock & Roper Rhodes Premium Pneumatic Dual Flush Plate, six finish optionsChoose a compatible pneumatic control and confirm the required service access with your installer before ordering.
£177.50 £125.00
Keep the flushing system neatly concealed with the Tavistock Apex TR9002 Side Inlet Concealed Cistern. Its 135mm listed depth offers a slimline option for compatible WC furniture, while top and front access help your installer plan practical servicing access.Supplied pre-assembled with a pneumatic dual-flush valve, the Apex provides 3-litre reduced and 6-litre full flush settings. Pair it with a compatible pneumatic flush plate, sold separately, to coordinate the visible controls with your bathroom fittings.Key Features Slimline body: listed 135mm cistern depth for installations where available space matters. Side-entry inlet: check supply positioning with your installer before ordering. Pneumatic dual flush: 3-litre reduced and 6-litre full flush settings. Pre-assembled cistern: supplied with a pneumatic dual-flush valve; professional fitting and setup are still required. Top and front access: plan a suitable maintenance opening in your furniture or enclosure. Separate flush plate: choose a compatible pneumatic model to suit your finish scheme. Listed working pressure: 0.2–10.0 bar. Technical Specification Brand: Tavistock / Roper Rhodes Range: Apex Product code: TR9002 Alternative range name: Roper Rhodes Cascade Product type: concealed cistern Inlet: side entry Actuation: pneumatic dual flush Flush settings: 3 / 6 litres Listed width: 464mm Listed depth: 135mm Listed working pressure: 0.2–10.0 bar Service access: top and front Colour: white Flush plate: sold separately Installation & CompatibilityDesigned for compatible back-to-wall WC and furniture installations. Check your exact pan, furniture unit, flush-pipe alignment, inlet position and available installation space before ordering. The cistern's body depth alone does not establish the complete clearance needed for pipework, fittings and maintenance access.Your installer should confirm operating pressure, connections and suitable flush settings for the pan. Keep an accessible route to service the inlet and flush valves after installation. A concealed cistern is not a load-bearing WC support frame; wall-hung pans require their own suitable support system.Frequently Asked QuestionsIs a flush plate included?No. A compatible pneumatic flush plate is required and sold separately. The linked Premium Pneumatic Flush Plate range lists TR9002 compatibility.Will it fit my WC furniture?Check the complete installation requirements with your installer. The listed cistern dimensions are 464mm wide and 135mm deep, but additional room is needed for the installation's connections and access. Do not assume every furniture unit will fit.What are the flush volumes?The listed dual-flush settings are 3 litres for a reduced flush and 6 litres for a full flush. Your installer should confirm these suit your WC pan and set up the cistern accordingly.What water pressure does it require?The listed working-pressure range is 0.2–10.0 bar. Ask your installer to check your actual supply pressure and the manufacturer's fitting instructions before installation.How is it accessed for servicing?The cistern offers top and front access. Your installer must provide a suitable accessible opening in the finished furniture or enclosure.Is this also called the Roper Rhodes Cascade?This TR9002 listing is also identified as the Roper Rhodes Cascade. Match the product code and fitting requirements when comparing or replacing an existing cistern.Can I order if the item shows as out of stock?Yes. Out-of-stock ordering is enabled for this non-clearance product, subject to supplier availability. For a current lead time, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete Your InstallationChoose your visible flush control separately and confirm compatibility before ordering:Tavistock & Roper Rhodes Premium Pneumatic Dual Flush Plate, six finishes, TR9057–TR9062
£156.50 £109.00
Finish your concealed cistern installation with the Tavistock & Roper Rhodes Premium Pneumatic Dual Flush Plate. A slim wall-facing design and stainless steel fascia create a clean, contemporary detail, with six finishes to coordinate with your bathroom fittings.Choose Chrome, Matt Black, Brushed Brass, Brushed Bronze, Brushed Nickel or Gunmetal. This range is on display in our Norwich showroom; contact us to confirm the finish you would like to see before visiting.Key Features Pneumatic dual-flush operation: designed for compatible dual-flush pneumatic cisterns. Stainless steel fascia and buttons: 2mm-thick 304 stainless steel front components with ABS backing, confirmed by the TR9057 technical sheet. Six coordinating finishes: options from polished Chrome to brushed metallic finishes and Matt Black. Concealed installation compatibility: listed for selected Tavistock and Roper Rhodes cisterns and WC frame systems. Showroom display: view the range in Norwich, NR5 9JF, subject to display availability. Technical Specification Brand: Tavistock / Roper Rhodes Product type: pneumatic dual flush plate Listed face dimensions: 206mm wide × 138mm high Front plate and buttons: 2mm-thick 304 stainless steel, per TR9057 technical sheet Backing: ABS, per TR9057 technical sheet Chrome SKU: TR9057 Matt Black SKU: TR9058 Brushed Brass SKU: TR9059 Brushed Bronze SKU: TR9060 Brushed Nickel SKU: TR9061 Gunmetal SKU: TR9062 TR9057 fixings: included, as stated on its technical sheet Compatibility & InstallationThe manufacturer's TR9057 technical sheet identifies compatibility with dual-flush pneumatic flushing cisterns and lists the following Roper Rhodes Group products. Confirm the exact cistern, actuation type and installation dimensions before ordering; do not assume suitability for a mechanical or electronic flushing system. In-wall cistern: TR9009 Vortex bottom-inlet cistern: VOR790 Torrent cistern: TR9001 Apex side-inlet cistern: TR9002 Comfort-height cistern: TR9008, in standard-depth furniture only 1.17m wall-hung WC frame: TR9006 1.0m wall-hung WC frame: TR9015 0.82m wall-hung WC frame: TR9005 Have your installer check the required opening, installed projection and clearance behind the plate using the technical drawing and actual product before cutting or preparing the surface. Front fascia thickness is not the overall installation depth.Care & CleaningFollow the manufacturer's care instructions for your selected finish. Clean gently with a soft cloth and avoid abrasive pads or harsh cleaning chemicals.Frequently Asked QuestionsWill this fit any concealed cistern?It is intended for compatible dual-flush pneumatic cisterns. Match your cistern model and pneumatic connections before ordering; being concealed does not by itself establish compatibility.Which Tavistock and Roper Rhodes systems are listed?The TR9057 technical sheet lists TR9009, VOR790, TR9001, TR9002 and TR9008 cisterns, plus TR9006, TR9015 and TR9005 frame systems. TR9008 compatibility is limited to standard-depth furniture.What is it made from?The TR9057 technical sheet specifies an ABS backing with a 2mm-thick 304 stainless steel front plate and buttons. Contact us if you need finish-specific construction or coating confirmation.Which finish should I choose?Choose Chrome, Matt Black, Brushed Brass, Brushed Bronze, Brushed Nickel or Gunmetal from the options. Compare with your existing fittings, as similarly named finishes from different ranges may not be an exact match.Can I see it in your showroom?Yes, the range is on display in Norwich, NR5 9JF. Call 01603 381095 or email customerservice@bubblegumbathrooms.co.uk to confirm the finish on display before visiting.Can I order if the item shows as out of stock?This non-clearance product can be ordered in subject to supplier availability. If checkout is unavailable or you need a current lead time, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Compatible Cisterns & WC FramesCheck your installation requirements against these related listings: TR9009 In-Wall Concealed Cistern VOR790 / TR9001 Vortex and Torrent Cistern TR9002 Apex Side-Inlet Cistern TR9008 Comfort-Height Cistern, standard-depth furniture only TR9006 1.17m Wall-Hung WC Frame TR9015 1.0m Wall-Hung WC Frame TR9005 0.82m Wall-Hung WC Frame
£85.00 - £97.00
Keep the basin deck clear and create a streamlined washbasin area with the Tavistock Anthem Wall Mounted Basin Mixer. Its rounded styling and elongated spout bring a contemporary look to compatible countertop basins and vanity installations, with the water supplies concealed within the wall.A single lever controls flow and temperature, while a ceramic cartridge provides smooth operation. Choose Chrome, Black, Brushed Brass or Gunmetal to coordinate with the wider Anthem range. The minimum recommended operating pressure is 0.2 bar.Key Features Wall-mounted layout: leaves the basin deck free of tap fittings and makes the surrounding surface easier to wipe clean. Single-lever operation: adjust flow and temperature using one control. Ceramic cartridge: smooth control for everyday use. Four finishes: Chrome, Black, Brushed Brass and Gunmetal. 0.2 bar minimum recommended pressure: confirm the full installation requirements with your plumber. Anthem styling: coordinate with matching basin and bath taps. 10-year guarantee: includes the cartridge, subject to Tavistock's terms. Technical Specification Brand: Tavistock Range: Anthem Product type: Wall-mounted basin mixer tap Control: Single lever Cartridge: Ceramic Mounting: Wall mounted with concealed supply pipework Overall dimensions: 160mm wide × 120mm high × 180mm deep Minimum recommended pressure: 0.2 bar Basin waste: Not included; sold separately Chrome model: TAN19 Black model: TAN1903 Brushed Brass model: TAN1904 Gunmetal model: TAN1905 Guarantee: 10 years including cartridge, subject to manufacturer terms Installation & CompatibilityPlan the concealed hot and cold supplies before finishing the wall and arrange installation by a qualified plumber. Check the manufacturer's technical drawing for connection centres, wall depth, spout reach, outlet position and access requirements. The stated overall depth should not be assumed to be the spout reach.Position the outlet to deliver water comfortably into your basin, leaving sufficient clearance for handwashing and lever movement. Your plumber should confirm the water system meets the 0.2 bar minimum recommended pressure and all other manufacturer requirements. Select a separate basin waste suited to your basin's outlet and overflow arrangement.Care & CleaningFollow Tavistock's care instructions for your chosen finish. Use a soft cloth, avoid abrasive pads and harsh cleaning chemicals, and dry the surface after cleaning to help reduce water marks.Frequently Asked QuestionsHow does a wall-mounted basin mixer differ from a deck-mounted tap?It mounts to the wall above the basin instead of through a tap hole in the basin or worktop. The supply pipework is concealed in the wall, so installation should be planned before tiling or finishing.Is a basin waste included?No. A suitable basin waste must be purchased separately. Check whether your basin requires a slotted or unslotted waste before choosing.What water pressure does it need?The minimum recommended pressure is 0.2 bar. Ask your plumber to confirm your supply meets this and the manufacturer's full installation requirements before ordering.Will this work with a countertop basin?It can suit a countertop basin where the outlet height, spout reach and basin position are compatible. Compare the basin dimensions with the manufacturer's tap drawing before finalising the pipework.Which finishes are available?Chrome (TAN19), Black (TAN1903), Brushed Brass (TAN1904) and Gunmetal (TAN1905). Choose your preferred finish above.What guarantee is included?The tap carries a 10-year Tavistock guarantee including the ceramic cartridge, subject to the manufacturer's terms and installation and care requirements.Can I order if the item shows as out of stock?Yes. This non-clearance product can be ordered subject to supplier availability. For a specific availability or delivery check, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095 before ordering.Complete the Anthem CollectionCoordinate your bathroom or compare another tap layout from the Anthem range: Anthem Basin Mixer with Click Waste – standard deck-mounted alternative. Anthem Mini Basin Mixer with Click Waste – compact alternative. Anthem Tall Basin Mixer with Click Waste – compare a tall tap for compatible countertop basins. Anthem Eco Basin Mixer with Click Waste in Chrome. Anthem Bath Filler. Anthem Bath Shower Mixer. Anthem Freestanding Bath Shower Mixer.
£127.00 - £225.00
Create a focal point beside your freestanding bath with the Tavistock Anthem Freestanding Bath Shower Mixer. Its 1030mm overall height gives the rounded Anthem design a striking floor-mounted profile, while the included handset and hose add flexibility for rinsing the bath or washing your hair.Choose Chrome, Black, Brushed Brass or Gunmetal and coordinate with matching Anthem basin fittings for a considered bathroom scheme.Key Features Floor-mounted design: stands independently beside a compatible freestanding bath. Handset and hose included: handheld rinsing alongside bath filling. 1030mm overall height: check outlet height and bath-rim clearance before ordering. Lever operation: convenient adjustment of the mixer. Ceramic cartridge: smooth control for everyday use. Four finishes: Chrome, Black, Brushed Brass and Gunmetal. 10-year tap guarantee: including cartridge, subject to manufacturer terms. Technical Specification Brand: Tavistock Range: Anthem Product type: freestanding bath shower mixer Mounting: floor mounted Listed overall dimensions: 200mm wide × 1030mm high × 365mm deep Operation: lever Cartridge: ceramic Handset and hose: included Chrome SKU: TAN43 Black SKU: TAN4303 Brushed Brass SKU: TAN4304 Gunmetal SKU: TAN4305 Tap guarantee: 10 years including cartridge, subject to manufacturer terms Installation & Bath CompatibilityThis is a floor-mounted mixer, not a deck-mounted tap. Plan the water supplies and secure floor fixing with your installer before the floor is finished. Confirm the required mounting assembly, supplied fixing components, connection sizes and access for future maintenance against the manufacturer's installation instructions.Check spout outlet height and reach against your bath's rim and bowl. The 1030mm measurement is the overall height, not a confirmed outlet height, and 365mm overall depth must not be assumed to be spout reach. Leave room to operate the lever and use the handset.Ask your installer to confirm the manufacturer's operating-pressure requirements and suitability for your water system before ordering. Do not assume the pressure rating of other Anthem models applies to this freestanding mixer. A handset does not itself establish thermostatic temperature control.Care & CleaningFollow Tavistock's care instructions for your chosen finish. Clean gently with a soft cloth, avoid abrasive pads and harsh chemicals, and dry after cleaning to help reduce water marks.Frequently Asked QuestionsDoes this require plumbing through the floor?Yes. This freestanding format needs floor-level water supplies and a secure mounting arrangement. Have your installer plan the pipework, fixing and maintenance access before installation.Are the handset and hose included?Yes, both are included. Confirm any additional installation or mounting components required with your installer before ordering.Will it fit beside my freestanding bath?Check the outlet height, spout reach, bath-rim clearance and floor-fixing position against the manufacturer's drawing. Overall dimensions alone do not establish compatibility with every bath.What water pressure does it need?The current listing does not provide a verified pressure rating for this freestanding model. Contact us or ask your installer to confirm the manufacturer's requirements before ordering.Which finishes are available?Chrome (TAN43), Black (TAN4303), Brushed Brass (TAN4304) and Gunmetal (TAN4305).What guarantee is included?The tap carries a 10-year Tavistock guarantee including the ceramic cartridge, subject to manufacturer terms and installation and care requirements. Check the applicable cover for accessories separately.Can I order if the item shows as out of stock?This non-clearance product can be ordered in subject to supplier availability. If checkout is unavailable or you need a current lead time, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Anthem CollectionCoordinate your basin fittings or compare an alternative bath tap installation. Check finish availability and fitting requirements on each listing: Anthem Basin Mixer with Click Waste Anthem Mini Basin Mixer with Click Waste Anthem Tall Basin Mixer with Click Waste Anthem Wall Mounted Basin Mixer Anthem Eco Basin Mixer with Click Waste, Chrome Anthem Deck Mounted Bath Shower Mixer, alternative installation Anthem Deck Mounted Bath Filler, alternative without handset
£579.00 - £669.00
Fill the bath, rinse away bubbles or wash your hair with the Tavistock Anthem Bath Shower Mixer Tap with Handset. Combining a deck-mounted bath spout with a handheld shower and hose, it brings practical flexibility to your bathing space. The rounded body and elongated spout coordinate with Anthem basin fittings for a consistent contemporary finish.Choose Chrome, Black, Brushed Brass or Gunmetal to complement your bathroom scheme.Key Features Bath filling and handheld rinsing: bath spout with supplied shower handset and hose. Deck-mounted installation: for a compatible bath deck or mounting surface. Four finish options: Chrome, Black, Brushed Brass and Gunmetal. Ceramic cartridge: smooth control for everyday use. Low-pressure suitability: listed minimum recommended operating pressure of 0.2 bar. Coordinated Anthem styling: matching basin tap formats available separately. 10-year tap guarantee: including cartridge, subject to manufacturer terms and exclusions. Technical Specification Brand: Tavistock Range: Anthem Product type: bath shower mixer tap with handset and hose Mounting: deck mounted Listed mixer dimensions: 180mm wide × 126mm high × 140mm deep Minimum recommended pressure: 0.2 bar Cartridge: ceramic Chrome SKU: TAN42 Black SKU: TAN4203 Brushed Brass SKU: TAN4204 Gunmetal SKU: TAN4205 Tap guarantee: 10 years including cartridge, subject to manufacturer terms What's Included Anthem bath shower mixer in your chosen finish Shower handset Shower hose Installation & CompatibilityAsk your installer to confirm the bath's tap-hole layout, mounting centres, connection sizes, water pressure and suitable handset positioning before ordering. Do not use the listed width as a confirmed tap-centre measurement or assume overall depth equals spout reach. Verify critical fitting dimensions against the manufacturer's technical drawing before drilling or preparing the bath.Allow access to the plumbing and room to operate the controls. Actual bath-filling and handset performance depend on your water system, available flow and pipework. A handset does not itself confirm thermostatic temperature regulation; your installer should assess the appropriate temperature controls for your installation.Care & CleaningFollow the manufacturer's finish-care instructions. Clean gently with a soft cloth, avoid abrasive pads and harsh chemicals, and dry the surface after cleaning to help reduce water marks.Frequently Asked QuestionsHow does this differ from the Anthem bath filler?This bath shower mixer includes a handset and hose for handheld rinsing alongside filling the bath. The separate Anthem bath filler is the alternative if you only need a bath spout.Are the handset and hose included?Yes. Both are included with this bath shower mixer. Check any additional mounting accessories required for your installation before ordering.Which finishes are available?Chrome (TAN42), Black (TAN4203), Brushed Brass (TAN4204) and Gunmetal (TAN4205). Select your preferred finish above.What water pressure does it require?The listed minimum recommended operating pressure is 0.2 bar. Your installer should confirm pressure and flow suitability for both bath filling and handset use.Will it fit my bath?Check the tap-hole layout, mounting centres, connections and spout position with your installer. This deck-mounted format should not be assumed to fit every bath.What guarantee is included?The tap carries a 10-year Tavistock guarantee including its ceramic cartridge, subject to manufacturer terms and care requirements. Check the applicable terms for accessories rather than assuming every component has identical cover.Can I order if the item shows as out of stock?This non-clearance product can be ordered in subject to supplier availability. If checkout is unavailable or you need a current lead time, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Anthem CollectionCoordinate your basin fittings or compare alternative bath tap formats. Check finish availability and fitting requirements on each listing: Anthem Basin Mixer with Click Waste Anthem Mini Basin Mixer with Click Waste Anthem Tall Basin Mixer with Click Waste Anthem Wall Mounted Basin Mixer Anthem Eco Basin Mixer with Click Waste, Chrome Anthem Bath Filler, alternative without handset Anthem Freestanding Bath Shower Mixer, alternative mounting format
£225.00 - £315.00
Bring the Anthem look to your bath with the Tavistock Anthem Deck Mounted Bath Filler Tap. Its rounded body and elongated spout complement the range's basin mixers, helping you create a coordinated wash and bathing space. Choose Chrome, Black, Brushed Brass or Gunmetal to suit your bathroom scheme.Key Features Deck-mounted bath filler: designed to fill a bath through a dedicated spout. Four finish options: Chrome, Black, Brushed Brass and Gunmetal. Ceramic cartridge: smooth operation for everyday use. Low-pressure suitability: listed minimum recommended operating pressure of 0.2 bar. Coordinating design: rounded Anthem styling to complement matching basin taps. 10-year guarantee: including the cartridge, subject to manufacturer terms. Technical Specification Brand: Tavistock Range: Anthem Product type: bath filler tap Mounting: deck mounted Listed dimensions: 180mm wide × 126mm high × 140mm deep Minimum recommended pressure: 0.2 bar Cartridge: ceramic Chrome SKU: TAN32 Black SKU: TAN3203 Brushed Brass SKU: TAN3204 Gunmetal SKU: TAN3205 Guarantee: 10 years including cartridge, subject to manufacturer terms Installation & CompatibilityAsk your installer to confirm the bath's tap-hole layout, mounting centres, connection sizes and available water pressure before ordering. The listed overall width must not be treated as a confirmed tap-centre measurement, and overall depth is not necessarily spout reach. Confirm critical fitting dimensions against the manufacturer's drawing before drilling or preparing the bath.Position the spout so water falls into the bath and allow sufficient space for the controls and plumbing access. Actual filling performance depends on your water system, pressure and pipework; no specific filling time is promised.Care & CleaningFollow the manufacturer's care instructions for your selected finish. Use a soft cloth, avoid abrasive pads and harsh cleaning chemicals, and dry after cleaning to help reduce water marks.Frequently Asked QuestionsIs this a bath filler or a bath shower mixer?This is the Anthem bath filler, intended for filling a bath through its spout. For a separate bath shower mixer option, see the related Anthem listing below.Which finishes are available?Choose Chrome (TAN32), Black (TAN3203), Brushed Brass (TAN3204) or Gunmetal (TAN3205).What water pressure is required?The listed minimum recommended operating pressure is 0.2 bar. Have your installer confirm pressure and flow suitability for your water system before purchase.Will it fit my bath?Check the mounting layout, tap centres, connections and spout position with your installer. Do not assume universal compatibility or use the listed overall dimensions as drilling measurements.What guarantee is included?The bath filler carries a 10-year Tavistock guarantee including the ceramic cartridge, subject to manufacturer terms, installation requirements and care instructions.Can I order if the item shows as out of stock?This non-clearance product can be ordered in subject to supplier availability. If checkout is unavailable or you need a current lead time, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Anthem CollectionCoordinate your basin fittings or compare alternative bath tap formats. Check finish availability and fitting requirements on each listing: Anthem Basin Mixer with Click Waste Anthem Mini Basin Mixer with Click Waste Anthem Tall Basin Mixer with Click Waste Anthem Wall Mounted Basin Mixer Anthem Eco Basin Mixer with Click Waste, Chrome Anthem Bath Shower Mixer, alternative bath fitting Anthem Freestanding Bath Shower Mixer, alternative installation format
£185.00 - £249.00
Give your countertop basin the clearance it needs with the Tavistock Anthem Tall Basin Mixer with Click Waste. Its 298mm overall height pairs a raised profile with the rounded body and elongated spout of the Anthem range, helping create a coordinated contemporary washbasin area.Single-lever operation brings flow and temperature adjustment together in one control, while a ceramic cartridge provides smooth operation. Choose Chrome, Black, Brushed Brass or Gunmetal to complement your bathroom fittings. A click basin waste is included.Key Features Tall profile: 298mm overall height for compatible countertop basins and vessel bowls. Single-lever control: adjust flow and temperature with one handle. Ceramic cartridge: smooth water control for everyday use. Click waste included: push to open or close the basin waste. Four finish options: Chrome, Black, Brushed Brass and Gunmetal. Coordinated styling: rounded Anthem design to match other taps in the collection. 10-year guarantee: includes the cartridge, subject to Tavistock's terms. Technical Specification Brand: Tavistock Range: Anthem Product type: Tall mono basin mixer tap Mounting: Deck mounted Overall dimensions: 52mm wide × 298mm high × 135mm deep Control: Single lever Cartridge: Ceramic Waste: Click basin waste included Chrome model: TAN52 Black model: TAN5203 Brushed Brass model: TAN5204 Gunmetal model: TAN5205 Guarantee: 10 years including cartridge, subject to manufacturer terms Installation & Basin CompatibilityThis tall mixer is intended for compatible raised basin installations, with the tap mounted alongside the basin. Before ordering, check the manufacturer's technical drawing for outlet height, spout reach, tap-hole requirements, connection details and worktop clearance. The 298mm measurement is the overall tap height, not the height of the water outlet, and the stated overall depth should not be assumed to be spout reach.Ask your plumber to confirm the required operating pressure and suitability for your water system. Check that the supplied click waste suits your basin's outlet and overflow arrangement. Position the spout so water falls comfortably into the bowl and allow sufficient space for the lever to operate.Care & CleaningFollow Tavistock's finish-care instructions. Clean gently with a soft cloth, avoid abrasive pads and harsh chemicals, and dry the surface after cleaning to help reduce water marks.Frequently Asked QuestionsDo I need a tall basin mixer?A tall mixer can suit a countertop basin or vessel bowl where a standard-height tap would not provide enough clearance. Always compare the basin dimensions with the tap's outlet height and spout reach before ordering.Is 298mm the height of the spout outlet?No. It is the overall tap height. Refer to the manufacturer's technical drawing for the outlet height and other installation dimensions.Is the click waste included?Yes. A push-to-open/close click basin waste is supplied. Check its compatibility with your basin and overflow arrangement before fitting.Which finishes can I choose?Chrome (TAN52), Black (TAN5203), Brushed Brass (TAN5204) and Gunmetal (TAN5205). Select your preferred finish above.What water pressure does this tap need?Have your plumber confirm the manufacturer's minimum and maximum pressure requirements before ordering. System suitability should not be assumed from the tap's height or appearance.What guarantee is included?The tap carries a 10-year Tavistock guarantee, including the ceramic cartridge, subject to the manufacturer's terms and installation and care requirements.Can I order if the item shows as out of stock?Yes. This non-clearance product can be ordered subject to supplier availability. If you need a specific date, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095 to check availability before ordering.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Anthem CollectionCoordinate your bathroom or compare another basin tap layout from the Anthem range: Anthem Basin Mixer with Click Waste – standard-height alternative. Anthem Mini Basin Mixer with Click Waste – compact alternative. Anthem Wall Mounted Basin Mixer – compare a wall-mounted layout. Anthem Eco Basin Mixer with Click Waste in Chrome. Anthem Bath Filler. Anthem Bath Shower Mixer. Anthem Freestanding Bath Shower Mixer.
£159.00 - £225.00
Give a smaller basin a coordinated contemporary finish with the Tavistock Anthem Mini Basin Mixer Tap with Click Waste. At 143mm high, this compact alternative to the standard Anthem mixer suits cloakrooms and smaller en-suite settings where a taller tap could look out of proportion. Choose Chrome, Black, Brushed Brass or Gunmetal to complement your bathroom fittings.Key Features Compact proportions: 143mm overall height for smaller basin installations, subject to dimensional checks. Click waste included: push to open or close the basin waste. Four finish options: Chrome, Black, Brushed Brass and Gunmetal. Low-pressure suitability: minimum recommended operating pressure of 0.2 bar. Contemporary styling: rounded body and elongated spout. Coordinating range: pair with Anthem bath fittings or compare alternative basin formats. 10-year manufacturer guarantee: subject to manufacturer terms and exclusions. Technical Specification Brand: Tavistock Range: Anthem Product type: mini mono basin mixer tap with click waste Installation: deck mounted, single tap hole Overall height: 143mm Width: 42mm Overall depth: 136mm Minimum recommended pressure: 0.2 bar Waste: click basin waste included Chrome SKU: TAN61 Black SKU: TAN6103 Brushed Brass SKU: TAN6104 Gunmetal SKU: TAN6105 Guarantee: 10 years, subject to manufacturer terms What's Included Anthem Mini basin mixer in your selected finish Click basin waste Installation ConsiderationsAsk your installer to check your basin's tap hole, available water pressure and fitting connections before purchase. Confirm spout position against the basin bowl and ensure the supplied waste suits the basin's overflow arrangement. Overall depth is not the same as spout reach; use the manufacturer's technical drawing to confirm critical clearances before installation.Frequently Asked QuestionsHow does the Mini differ from the standard Anthem mixer?The Mini is 143mm high, compared with the standard Anthem basin mixer's 158mm overall height. Its lower profile offers an alternative for smaller basins; check the complete dimensions rather than choosing on height alone.Is a click waste included?Yes. A push-to-open-and-close click basin waste is supplied. Your installer should confirm compatibility with the basin's overflow arrangement.Which finishes can I choose?Choose Chrome, Black, Brushed Brass or Gunmetal from the finish options. Product codes are TAN61, TAN6103, TAN6104 and TAN6105 respectively.Will this work with low water pressure?The minimum recommended operating pressure is 0.2 bar. Ask your installer to confirm your available pressure and flow before ordering.What guarantee does it have?The tap carries a 10-year manufacturer's guarantee against defective workmanship or materials, subject to manufacturer terms and exclusions.Can I order if the item shows as out of stock?This non-clearance product can be ordered in, subject to supplier availability. If checkout is unavailable or you need a current lead time, contact customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Anthem CollectionCompare alternative basin mixers or coordinate your bath fittings. Check dimensions and finish availability on each listing before ordering. Anthem Standard Basin Mixer with Click Waste Anthem Tall Basin Mixer with Click Waste Anthem Wall Mounted Basin Mixer Anthem Eco Basin Mixer with Click Waste, Chrome Anthem Bath Filler Anthem Bath Shower Mixer Anthem Freestanding Bath Shower Mixer
£109.99 - £155.99
Bring a coordinated finish to your wash space with the Tavistock Anthem Basin Mixer Tap with Click Waste. Its rounded body and elongated spout create a contemporary look, with a choice of Chrome, Black, Brushed Brass or Gunmetal to complement your bathroom. A matching click waste completes the basin installation without needing to source a separate waste.Key Features Contemporary mono mixer: a compact, single-hole basin tap with a rounded body and elongated spout. Click waste included: push to open or close the basin waste. Four finish options: Chrome, Black, Brushed Brass and Gunmetal. Low-pressure suitability: minimum recommended operating pressure of 0.2 bar. 158mm overall height: check dimensions and spout position against your basin before purchase. Coordinating Anthem range: matching bath and alternative basin mixers available separately. Listed 10-year manufacturer guarantee: subject to terms and exclusions. Technical Specification Brand: Tavistock Range: Anthem Product type: mono basin mixer tap with click waste Installation: deck mounted, single tap hole Width: 42mm Overall height: 158mm Overall depth: 136mm Minimum recommended pressure: 0.2 bar Waste: click basin waste included Chrome SKU: TAN11 Black SKU: TAN1103 Brushed Brass SKU: TAN1104 Gunmetal SKU: TAN1105 Listed guarantee: 10 years, subject to manufacturer terms What's Included Anthem basin mixer in your selected finish Click basin waste Installation ConsiderationsAsk your installer to confirm basin tap-hole suitability, spout position, available pressure and pipe connections before purchase. Check that the supplied waste is compatible with your basin's overflow arrangement. Overall depth is not the same measurement as spout reach, so confirm any critical clearances against the manufacturer's drawing before installation.Frequently Asked QuestionsIs the click waste included?Yes. A click basin waste is supplied with the mixer. Check compatibility with your basin's overflow arrangement before fitting.Which finishes are available?Choose Chrome, Black, Brushed Brass or Gunmetal from the finish options. The corresponding product codes are TAN11, TAN1103, TAN1104 and TAN1105.What water pressure does this tap need?The listed minimum recommended operating pressure is 0.2 bar. Your installer should confirm your actual pressure and flow before purchase.What size is the mixer?The listed overall dimensions are 42mm wide, 158mm high and 136mm deep. Check the manufacturer's drawing for spout height, reach and fitting details before preparing your basin.Is this the Anthem Eco version?No. This is the standard Anthem basin mixer. The Chrome Anthem Eco is a separate product with a cold-start cartridge; see the linked alternative below if that is the version you need.What guarantee is included?The listing specifies a 10-year manufacturer's guarantee against defective workmanship or materials. Manufacturer terms and exclusions apply.Can I order if the item shows as out of stock?This non-clearance product can be ordered in, subject to supplier availability. If checkout is unavailable or you need a current lead time, email customerservice@bubblegumbathrooms.co.uk or call 01603 381095.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Anthem CollectionCompare alternative basin formats or coordinate your bath fittings, checking dimensions and finish availability on each listing: Anthem Mini Basin Mixer with Click Waste Anthem Tall Basin Mixer with Click Waste Anthem Wall Mounted Basin Mixer Anthem Eco Basin Mixer with Click Waste, Chrome Anthem Bath Filler Anthem Bath Shower Mixer Anthem Freestanding Bath Shower Mixer
£115.00 - £160.00
The Tavistock Anthem Eco Basin Mixer pairs contemporary styling with genuinely clever engineering. Its rounded body and elongated spout bring a soft, modern elegance to any basin, while the high-shine chrome finish sits happily alongside almost any bathroom scheme. The real star is Tavistock's energy-saving cold-start cartridge: with the handle in the centre position the tap draws cold water only, so your boiler isn't fired up every time you rinse your hands. A simple change that trims energy use day after day, without you having to think about it. Key Features Energy-saving eco cartridge — cold-start technology draws only cold water when the handle is centred, cutting unnecessary hot water and energy use Click waste included — matching push-to-open basin waste in the box, no separate purchase needed Solid brass construction — durable brass body with a polished, high-shine chrome finish Single-lever control — smooth one-handed adjustment of flow and temperature Low-pressure friendly — works from a minimum of just 0.2 bar, so it suits most plumbing systems 10-year guarantee — backed by Tavistock for total peace of mind Technical Specification SKU: TAN99 Finish: Polished Chrome (high shine) Type: Basin mono mixer with click waste Mounting: Deck mounted — requires 1 tap hole Operation: Single lever Material: Solid brass Dimensions: 42(W) × 158(H) × 136(D) mm Minimum Recommended Pressure: 0.2 bar Cartridge: Energy-saving eco cartridge (cold start) Waste: Click (push-to-open) basin waste included Guarantee: 10 years (2 years on electrical components) Brand: Tavistock Range: Anthem FAQs What makes the Anthem Eco different from a standard basin mixer? It's all in the cartridge. In the centre (cold) handle position the Anthem Eco draws cold water only, whereas a standard mixer starts consuming hot water in the same position. That means less wasted energy every time you use the tap, with no change to how it feels day to day. Is the basin waste included? Yes — a matching click (push-to-open) basin waste is included in the box, so there's nothing extra to buy. What water pressure does this tap need? A minimum recommended pressure of just 0.2 bar, making it a great choice for most systems, including lower-pressure set-ups. If you're unsure of your water pressure, contact us before ordering and we'll be happy to advise. Is the Anthem Eco available in other finishes? The Anthem Eco is produced in chrome only. If you'd like Black, Brushed Brass or Gunmetal, take a look at the rest of the Anthem collection, which is available in four finishes. What guarantee does this tap come with? Tavistock backs the Anthem Eco with a 10-year guarantee (electrical components are covered for 2 years). Can I order if the item shows as out of stock? Yes — you can still place an order even if this item shows as out of stock. We will fulfil your order as soon as stock is available. If you need a specific delivery date, please contact us at customerservice@bubblegumbathrooms.co.uk or call 01603 381095. Delivery Information This is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge. Complete the Anthem Collection The Anthem collection spans basin mixers, wall-mounted options, bath fillers and bath shower mixers — perfect for a fully coordinated bathroom. Also in the range: Tavistock Anthem Basin Mixer with Click Waste (4 finishes) Tavistock Anthem Mini Basin Mixer with Click Waste (cloakroom basins) Tavistock Anthem Tall Basin Mixer Tap & Click Waste (countertop basins) Tavistock Anthem Wall Mounted Basin Mixer Tap Tavistock Anthem Bath Filler Tavistock Anthem Bath Shower Mixer (with handset) Tavistock Anthem Freestanding Bath Shower Mixer Or browse the full Anthem collection.
£156.50 £115.00
Create an uncluttered shower space with the Tavistock Axiom SAX2377 Single Outlet Concealed Thermostatic Shower Set in Chrome. A 225mm overhead head delivers your daily shower while concealed pipework keeps the wall finish clean. Push-button on/off operation and a central temperature dial make the controls straightforward to use.This set combines the concealed thermostatic valve, cover plate, overhead head and adjustable shower arm. It is a single-outlet overhead shower package, not an overhead-and-handset system. Available as supplier-overstock clearance while stocks last.Key Features 225mm overhead shower: chrome-plated head for a coordinated finish. Push-button on/off: start and stop your shower with a simple press. Thermostatic control: central temperature adjustment helps maintain the selected temperature. Single outlet configuration: supplies the overhead head, without a separate handset outlet. Concealed brass valve: valve body and pipework sit behind the wall. Adjustable shower arm: round chrome-plated design. Installation fixings included. What's Included Thermostatic single-function push-button brass shower valve Single-function chrome-plated cover plate 225mm chrome-plated overhead shower head Round adjustable chrome-plated shower arm Fixings Technical Specification Brand: Tavistock Range: Axiom Model / SKU: SAX2377 Product type: single outlet concealed thermostatic shower set Finish: Chrome Head size: 225mm Outlet configuration: overhead shower only On/off control: push button Temperature control: central thermostatic dial Valve material: brass Minimum valve pressure: 1.0 bar Valve connections: 1/2 inch, suitable for 15mm pipework Laboratory flow at 1 bar: 10.6 litres per minute Laboratory flow at 2 bar: 14.5 litres per minute Laboratory flow at 3 bar: 17.6 litres per minute Barcode: 5016519493757 Flow rates are laboratory figures. Actual performance varies with the domestic water supply and accessories. The minimum valve pressure remains 1.0 bar even though the sheet also records a lower-pressure test result.Installation InformationAsk a qualified installer to check your water system, available pressure and flow, valve recess depth, connections and servicing access before ordering. Plan the concealed valve and pipework before finishing the wall. Check all dimensions and fitting requirements against the manufacturer's instructions and the actual components before starting work.Frequently Asked QuestionsWhat does single outlet mean?This set supplies one shower outlet: the overhead head. A separate handset and second outlet are not included.What size is the overhead head?The technical sheet specifies a 225mm chrome-plated shower head, paired with a round adjustable chrome-plated arm.What is included?The set includes the concealed thermostatic push-button valve, chrome cover plate, overhead shower head, adjustable arm and fixings. Your installer should confirm any additional installation fittings needed.How do the controls work?The push button switches the shower on and off. The central dial adjusts the thermostatic temperature setting.What pressure and pipework are required?The manufacturer's technical sheet specifies a minimum valve pressure of 1.0 bar and 1/2-inch connections suitable for 15mm pipework. Your installer should confirm suitable flow as well as pressure.Is this a clearance item?The listing is currently offered as supplier-overstock clearance, subject to availability. If it shows as unavailable, contact us for current availability rather than assuming it can be ordered at the displayed offer.How can I check suitability before ordering?Ask your installer to review the technical sheet or email customerservice@bubblegumbathrooms.co.uk with your questions.Delivery InformationThis is a small, postable item covered by a one-off small item delivery charge. You can combine it with other small items in a single order and pay just one delivery charge. Browse all items covered by the small delivery charge.Complete the Axiom CollectionLooking for a different configuration? These matt black products are alternatives, not components included with this chrome set: Axiom SAX2762 dual function shower system with overhead shower and handset, Matt Black Axiom SAX2764 dual outlet concealed thermostatic valve, Matt Black Browse all Tavistock products for your wider bathroom scheme.
£750.00 £459.00
You have seen 24 out of 58 products
Explore Tavistock bathroom products in one place, from basin and bath taps to thermostatic showers, concealed cisterns, flush plates and finishing accessories.
Browse Anthem, Lansdown and Cohort designs, with finish options available across selected products including chrome, brushed brass, matt black and gunmetal. Check each product listing for dimensions, compatibility and installation requirements.
Subscribe to our emails
